Cup brush crimped TBU dia. 50 mm shank dia. 6 mm stainless steel wire dia. 0.30

Technical information

Dia. external

50 mm

Dia. filament material

0.3 mm

Dia. shank

6 mm

Filament material

Stainless steel wire (INOX)

Length, filament

20 mm

Length, total

75 mm

Max. RPM

10500 RPM

Mounting system

Shank

Packaging

POS packaging

RPM, optimum

4200 - 6800 RPM

Width

10 mm

Packaging unit

5 pieces

Description

• Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint. Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece.
• In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310/1.4301 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD TOOLS brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310/1.4301 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.
• Stainless steel wire (INOX) withstands temperatures up to 450 °C.
• Cup brush with plastic-covered brush body.

Special features

• Highly flexible, enabling optimal adjustment to the workpiece contour.
• Very good corrosion resistance.
• Creates fine surfaces.
• Low risk of contaminating the workpiece.

Recommendations for use

• Please observe the recommended rotational speeds.
• For the best results, use a tool drive with a minimum output of 300 watts.

Safety notes

• When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Product identifiers

Product number

43703002

Family SKU

184863

EAN

4007220894651