PFERD TOOLS
1459 translated products currently available.
Angle handpiece WHA 4 90° G16 with 6 mm collet max. RPM 20,000
Much more ergonomic handpiece.
Angle handpiece WHA 10 90° G28 with 6 mm collet max. RPM 17,100
Much more ergonomic handpiece.
Angle handpiece WHA 10 90° G28 STV with 6 mm collet for rigid extension max. RPM 17,100
Angle handpiece 90° design with 6 mm collet and G28/diameter 28 mm sliding coupling, suitable for rigid extensions with G28 sliding coupling.
Angle handpiece WHA 7 90° G22 with 6 mm collet max. RPM 17,100
Much more ergonomic handpiece. Can be connected to all flexible shafts with G22 sliding coupling.
Angle handpiece WHA 7 90° G22 STV with 6 mm collet for rigid extension max. RPM 17,100
Angle handpiece 90° design with 6 mm collet and G22/diameter 22 mm sliding coupling, suitable for rigid extensions with G22 sliding coupling.
Angle handpiece WZ 6 DPF/SRF with 6 mm collet max. RPM 18,000
Handpiece, can be connected to flexible shafts, with handpiece-side coupling DPF/SRF (DPF = fixed duplex spring, SRF = flexible expansion ring).
Burnishing angle drive SWT 10 G28 with tool mounting 19x100 mm max. RPM 18,000
Can be connected to all flexible shafts with G28 connection (instead of the handpiece). Connection to shaft can be pivoted 360°. With M14 spindle thread and 19 x 100 mm tool mounting [dia. x width].
Angle drive WT 10 G28 with tool mounting 22.23 mm max. RPM 18,000
Angle drive for connection to all flexible shafts with G28 connection (instead of handpiece). Connection to flexible shaft can be pivoted 360°. Enables flexible shaft drives to be used as angle grinders.
flap grinding wheel for angle grinders FR WS dia. 115x20mm 5/8-11 A120 general use
On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure. Their flexibility enables them to adapt perfectly to the contours of the workpiece. The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond.
Electric angle grinder EWER 17/75 230 volts for dia. 125 mm 7,500 RPM/1,700 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Electric angle grinder UWER 18/110 SI for dia. 125 mm 230 volts 11,000-2,700 RPM/1,750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Electric angle grinder UWER 18/120 SI for dia. 115 mm 230 volts 11,500-2,800 RPM/1,750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
electric angle grinder UWER 18/95 SI for dia. 150mm 230 volts 9,500-2,300 RPM/1,750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Dry diamond drill bit DCD FL dia. 20 mm M14 for tiles (angle grinder)
Vacuum-brazed dry diamond drill bits DCD are suitable for drilling holes and round recesses in tiles and glazed tiles for water connections, sockets and light switches, for example. With M14 thread for use on 115/125 mm angle grinders.
Dry diamond drill bit DPD FL dia. 10 mm M14 for tiles (angle grinder)
Vacuum-brazed dry diamond drill bits for angle grinders are ideal for drilling holes into tiles and glazed tiles. The wax filling provides a self-cooling effect.
adapter BSAD 41/36X610
Depending on the PFERD TOOLS drive selected, different adapters are available.
EBSA 610 adapter
Depending on the PFERD TOOLS drive selected, different adapters are available.
Adapter, filing machine AD PF 4.5/4.0
Depending on the PFERD TOOLS drive selected, different adapters are available.
accessory adapter set AK for wheel brushes crimped slim with hole 31.8
PFERD TOOLS offers various adapters for wheel brushes with holes.
accessory adapter pair for wheel brushes crimped wide and Composite with hole 50.8 to 14
PFERD TOOLS offers various adapters for wheel brushes with holes.
File for wood half-round 200 mm cut 2 general for roughing and finishing
PFERD TOOLS quality files which are particularly suited to coarse stock removal on wood.
cabinet file for wood half-round pointed 200mm cut 1 for coarse stock removal, roughing
PFERD TOOLS quality files which are particularly suited to coarse stock removal on wood.
wood rasp hand 250mm cut 1 for coarse stock removal, roughing
PFERD TOOLS quality rasps which are particularly suited to coarse stock removal on wood.
wood rasp half-round pointed 200mm cut 1 for coarse stock removal, roughing
PFERD TOOLS quality rasps which are particularly suited to coarse stock removal on wood.
Wood rasp round 200 mm cut 2 general for roughing and finishing
PFERD TOOLS quality rasps which are particularly suited to coarse stock removal on wood.
Tungsten carbide high-performance burr flame B dia. 12x30 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr flame B dia. 03x07 mm shank dia. 3 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Allen key STS D2,5mm
Allen key (STS) with diameter 2.5 mm.
Bottom flange FF 30
PFERD TOOLS offers different bottom flanges for installing robot spindles.
Hexagon handle wrench SKS SW 5 mm
PFERD TOOLS offers different hexagon L-wrenches (SKS) with different widths across flats (SW).
COMBICLICK backing pad dia. 100mm thread M10 for angle grinders 100
With this backing pad, COMBICLICK tools can be used on commercially available angle grinders.
Hexalobular socket key 4.0 Nm for all ALUMASTER versions
Torque spanners are special tools which make it possible to tighten screws or nuts with a defined force. They enable optimum and secure mounting.
Accessory for ALUMASTER, TC cutting inserts dia. 12 mm for ALUMASTER F 115/125
In conjunction with innovative tool systems from PFERD TOOLS, the specially developed cutting inserts are characterized by a long tool life and optimal stock removal rate.
Clamping bolt for ALUMASTER R50 shank dia. 8 mm for straight grinders
PFERD TOOLS offers matching arbors for HSS rotary cutters and ALUMASTER high speed discs.
key file flat 100mm cut 2 for delicate filing
These small files are perfectly suited to light and delicate filing tasks, especially in tool and mould-making. PFERD TOOLS produces these files according to DIN 7283 specifications.
key file square 100mm cut 2 for delicate filing
These small files are perfectly suited to light and delicate filing tasks, especially in tool and mould-making. PFERD TOOLS produces these files according to DIN 7283 specifications.
key file hand 100mm cut 2 for delicate filing
These small files are perfectly suited to light and delicate filing tasks, especially in tool and mould-making. PFERD TOOLS produces these files according to DIN 7283 specifications.
key file three square 100mm cut 2 for delicate filing
These small files are perfectly suited to light and delicate filing tasks, especially in tool and mould-making. PFERD TOOLS produces these files according to DIN 7283 specifications.
key file half-round 100mm cut 2 for delicate filing
These small files are perfectly suited to light and delicate filing tasks, especially in tool and mould-making. PFERD TOOLS produces these files according to DIN 7283 specifications.
key file round 100mm cut 2 for delicate filing
These small files are perfectly suited to light and delicate filing tasks, especially in tool and mould-making. PFERD TOOLS produces these files according to DIN 7283 specifications.
key file set with quick-mounting handle 7-piece 100mm cut 2 for delicate filing
Cross cut for general filing work.
Spacer sleeve DHFL 98980039
PFERD TOOLS offers different spacer sleeves for clamping flanges.
Spacer DS 90011460
Spacer for clamping flange.
aluminium oxide shop roll cloth SBR width 100mm x length 50m A100 for general use
The cloth-backed variant is suitable for general, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals.
Aluminium oxide shop roll paper SBR-P width 115 mm x length 25 m A100 general use
The abrasive material aluminium oxide A is the low-cost alternative for normal workloads when working on painted wooden and metal surfaces.
Foot switch FSE 22 2-POLE
Matching accessories for Mammoth Electronic flexible shaft drive.
On/off foot switch RCK FU-E/A
On/off foot switch which can be connected on the rear of the RCK control device and can be used to switch the RCK handpieces on and off.
Maintenance set P-Set for flexible shafts 10/12
Set for maintaining flexible shafts.
sharpening file feather edge shape 200mm cut 2 general for sharpening
Featheredge files from PFERD TOOLS are ideally suited to sharpening a wide variety of saw blades. The rhombus-shaped files, which are tanged and cut on four sides, impress with outstanding surface quality, even after long-term use.
Belt sander BSG 10/35 E belt length: 450 mmxWidth: 35 mm max. RPM 7,000
Belt sander with a belt length of 450 mm x width 35 mm. Matching belts: BA 35/450 and VB 35/450. Can be connected to all flexible shafts with G28 sliding coupling (instead of the handpiece).
drive roller ATR BSG 10/35 E
Drive roller for belt sander BSG 10/35 E.
roller ATR BSG 10/50 E
Drive roller for belt sander BSG 10/50 E.
drive roller soft ATR-W BSG 10/35 E
Soft drive roller for belt sander BSG 10/35 E.
drive roller soft ATR-W BSG 10/50 E
Soft drive roller for belt sander BSG 10/50 E.
guide roller ULR BSG 10/35 E
Guide roller for belt sander BSG 10/35 E.
guide roller ULR BSG 10/50 E
Guide roller for belt sander BSG 10/50 E.
Belt grinder handpiece BHA 4 G16 oVA
Belt grinder handpiece with belt grinder attachment and G16 sliding coupling, suitable for BW 4 DIN 10/G16, BW 4 DIN 10/G16 oHA, BW 6 DIN 10/G16, BW 6 DIN 10/G16 oHA. Belt grinder attachment without attachment arm. Belt grinder attachment holder suitable for belt grinder attachment arm BSVAK 9/25 x 305, BSVAK 9/25-1 x 305, BSVAK 4/16 x 305, BSVAK 9/9 x 305 and BSVAK 9/16 x 305.
Belt grinder handpiece BHA 7 G22 oVA
Belt grinder handpiece with belt grinder attachment and G22/diameter 22 mm sliding coupling, suitable for BW 7 DIN 10/G22, BW 7 DIN 10/G22 2 m, BW 7 DIN 10/G22 oHA, BW 7 DIN 10/G22 oHA 2 m. Belt grinder attachment without attachment arm. Belt grinder attachment holder suitable for belt grinder attachment arm BSVA 9/25 x 520, BSVA 9/25-1 x 520, BSVA 4/16 x 520, BSVA 9/16 x 520, BSVA 12/19 x 520 and BSVA 18/23 x 520.
Belt grinder handpiece BHA 10 G28 oVA
Belt grinder handpiece with belt grinder attachment and G28/diameter 28 mm sliding coupling, suitable for BW 10 SE 11 DIN 10/G28, BW 10 SE 11 DIN 10/G28 2 m, BW 10 SE 11 DIN 15/G28, BW 10 SE 11 DIN 10/G28 oHA, BW 10 SE 11 DIN 10/G28 oHA 2 m and BW 10 SE 11 DIN 15/G28 oHA. Belt grinder attachment without attachment arm. Belt grinder attachment holder suitable for belt grinder attachment arm BSVA 9/25 x 520, BSVA 9/25-1 x 520, BSVA 4/16 x 520, BSVA 9/16 x 520, BSVA 12/19 x 520 and BSVA 18/23 x 520.
precision needle file barrette 140mm Swiss cut 0, coarse
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
Cut-off wheel cut-off grinder EHT 350x4.0x20 mm PSF STEEL for steel (100 m/s)
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
cut-off wheel cut-off grinder EHT 300x4.0x20mm SG CAST+STONE for cast material/stone (100 m/s)
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
cut-off wheel cut-off grinder EHT 300x4.0x20mm SG STEEL for steel (100 m/s)
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
cut-off wheel cut-off grinder EHT 350x4.5x20mm SG STONE for stone (100 m/s)
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Solid carbide end mill dia. 6 mm, 5 flutes, 2xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal
The solid carbide end mills are suitable for universal use on a variety of materials.
Solid carbide end mill dia. 6 mm, 5 flutes, with chip divider, 3xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal
The solid carbide end mills are suitable for universal use on a variety of materials.
Solid carbide end mill dia. 6 mm, 5 flutes, with chip divider, 4xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal
The solid carbide end mills are suitable for universal use on a variety of materials.
Solid carbide end mill dia. 6 mm, 5 flutes, with chip divider, 2xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal
The solid carbide end mills are suitable for universal use on a variety of materials.
Solid carbide end mill dia. 6 mm, 5 flutes, with chip divider, 5xDC, radius 0.5 mm, AlCrN coating, HB shank, Universal
The solid carbide end mills are suitable for universal use on a variety of materials.
set 10-piece cloth-backed abrasive sheet aluminium oxide 230x280mm BG BL A40,80,100,120,180 general
PFERD TOOLS offers a wide selection of coated abrasive tools for working on different workpiece geometries and materials. They consist of a base, a base bond and a coating bond for the abrasive grain to adhere to. Depending on the grit size, coated abrasive tools can achieve a high stock removal rate or a very fine surface finish.
Cloth-backed abrasive sheet aluminium oxide 230x280 mm BG ECO BR A100 general for wood, paint and lacquer
The cloth-backed variant is suitable for general, heavy-duty use when working on painted surfaces, wood and metal.
cloth-backed abrasive sheet aluminium oxide 230x280mm BG BR A100 for steel with heavy-duty use
The brown cloth-backed variant is suitable for general, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals.
Cloth-backed abrasive sheet aluminium oxide 230x280 mm BG BL A150 general for wood, paint and lacquer
The blue cloth-backed variant is the low-cost alternative for normal workloads when working on painted wooden and metal surfaces.
sharpening file knife shape 200mm cut 2 general for sharpening
Files for sharpening different types of knives and scissors, but also suitable for sharpening spades, hacks, axes and similar tools.
precision needle file knife shape 140mm Swiss cut 0, coarse
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
whetstone S 250mm
The ceramic whetstone is particularly suitable for sharpening scythes, sickles, knives and other cutting tools.
Tin of ball bearing grease FT5
The grease is intended for the maintenance of all ball bearings. It is suitable for the light moistening of grease slingers to protect them against dust.
tube brush IBU dia. 3x100mm with eyelet stainless steel wire dia. 0.10
For light cleaning and deburring work on threaded holes or recesses, e.g. keyways.
Tube brush IBU dia. 0.7x12 mm shank dia. 0.4 mm aluminium oxide filament dia. 0.20 grit 2000
For light deburring, cleaning of holes and cross holes and for work on surfaces.
Tube brush IBU dia. 6x25 mm shank dia. 3.2 mm stainless steel wire dia. 0.12
For light cleaning and deburring work on threaded holes or recesses, e.g. keyways.
tube brush crimped IBU dia. 8x80mm M6 stainless steel wire dia. 0.15
Particularly suitable for deburring and cleaning pipes, threads, coupling sleeves and cylinders.
flexible shaft BW 4 PST-T DIN10/M4 1.5 metres for POLISTAR-Tube 7,650-1,500 RPM/450-100 watts
These special flexible shafts do not have a handpiece for tool mounting and are particularly flexible in the front section. The POLISTAR-TUBE grinding tools are attached directly to the core of the flexible shaft with screws (INOX type). POLINOX cross buffs PNST are screwed on with adapter AD M4 or AD M5 (accessories). This combination is highly suitable for gradual fine grinding and cleaning of inner surfaces of pipes and pipe bends. Both pipe bend ends can be deburred from the entry side.
flexible shaft BW 7 PST-T DIN10/M5 2 metres for POLISTAR-Tube 4,250-1,500 RPM/1,000-370 watts
These special flexible shafts do not have a handpiece for tool mounting and are particularly flexible in the front section. The POLISTAR-TUBE grinding tools are attached directly to the core of the flexible shaft with screws (INOX type). POLINOX cross buffs PNST are screwed on with adapter AD M4 or AD M5 (accessories). This combination is highly suitable for gradual fine grinding and cleaning of inner surfaces of pipes and pipe bends. Both pipe bend ends can be deburred from the entry side.
Electric pipe belt grinder EBER 12/25 R 230 volts 7.6 m/s belt length: 610-820 mm x width: 12-40 mm
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Electric pipe belt grinder EBER 17/75 R 230 volts/22.8 m/s belt length: 610-820 mm x width: 12-40 mm
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Diamond sabre saw blade 75 mm D357 (medium) cut-outs in container construction of GRP/CRP
Diamond sabre saw blades are exceptionally well-suited to work on fibre-reinforced plastics (GRP/CRP), e.g. for making cut-outs in container construction or for cutting prefabricated slabs.
Paint peeler (LAH) incl. file 50 mm cut 3-radial, finishing work
Set of paint peeler and file for paint peeler.
Flexible shaft BW 10 SE 11 DIN 15/G28 incl. handpiece 18,000-750 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 10 SE 11 DIN 15/G28 oHA 18,000-750 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 10 SE 11 DIN 10/G28 incl. handpiece 18,000-750 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 10 SE 11 DIN 10/G28 2 metres incl. handpiece 18,000-750 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 10 SE 11 DIN10/G28 2M without handpiece 18,000-750 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 10 SE 11 DIN10/G28 without handpiece 18,000-750 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 12 DIN10/G28 12,000-850 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 12 DIN10/G28 without handpiece 12,000-850 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 12 DIN15/G28 12,000-850 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 12 DIN15/G28 without handpiece 12,000-850 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 4 DIN10/G16 40,000-24,000 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 4 DIN10/G16 without handpiece 40,000-24,000 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 6 DIN10/G16 25,000-11,000 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 6 DIN10/G16 without handpiece 25,000-11,000 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 7 DIN10/G22 25,000-11,000 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 7 DIN10/G22 2M 25,000-11,000 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 7 DIN10/G22 2M without handpiece 25,000-11,000 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Flexible shaft BW 7 DIN10/G22 without handpiece 25,000-11,000 RPM
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
C-wrench HS 40-42
C-wrench (HS) with a diameter of 40-42 mm.
Accessory quick-change handle SWG for tube brushes with thread 1/2"
Suitable for manual work with tube brushes.
COMBITWIST cup brush knotted TBG dia. 100 mm M14 stainless steel wire dia. 0.35 mm angle grinders
Very aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter.
cup brush with bridle knotted TBGR dia. 100mm M14 steel wire dia. 0.50mm angle grinders
Aggressive brush with bridle. Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter on large areas.
INOX-TOTAL cup brush crimped RBUIT dia. 50 mm shank dia. 6 mm stainless steel wire dia. 0.30 mm
Generally suitable for cleaning, deburring, and removal of heat discolouration.
Miniature cup brush TBU dia. 15 mm shank dia. 2.34 mm white goat hair
Suitable for light brushing such as deburring, cleaning and polishing. Particularly suitable for brushing on small surfaces due to face-down use with the entire brush face applied to the workpiece.
Cup brush crimped TBU dia. 50 mm shank dia. 6 mm stainless steel wire dia. 0.30
Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint. Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece.
cup brush crimped TBU dia. 100mm M14 stainless steel wire dia. 0.30 angle grinders (1)
Excellent for medium-duty brushing such as deburring, cleaning and derusting on large surfaces.
Cup brush crimped TBU dia. 50 mm shank dia. 6 mm BLUE filament dia. 1.10 mm grit 180 power drills
Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint. Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece. Specially developed for use within a low rotational speed range on cordless drills and power drills.
POS cup brush 2 rows knotted TBG HD dia. 65 mm M14 stainless steel wire dia. 0.50 mm angle grinders
Double-row, very aggressive and robust brush that is able to withstand high mechanical loads. Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter.
Accessory arbor BO for cup brushes dia. 65-80 mm with width across flats 22 mm on 12 mm shank
Enable the use of cup brushes on tool drives with a collet. Also suitable for stationary applications with threaded cup brushes on CNC machines, automated centres and robots. Weldon shank according to DIN 6535.
Cup wheel ETT 110x20x22.23 mm C16 Performance Line SG CAST+STONE for cast material/stone
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Cup wheel ETT 110x20x22.23 mm A16 Performance Line SG STEELOX for steel/stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Reducing nipple R 1/2 x 1/4
Connecting fittings for air grinders.
Reducing collet RZH 6234
The reducing collet fits into an existing collet for 6 mm shank tools and is used as an adapter for 2.34 mm shank tools.
reducing ring for cut-off wheel hole 25.4 to 20.0mm (width 3.0mm) with stop collar
Reducing rings enable secure adjustment of the standard centre hole to a reduced centre hole dimension.
VHM deburring mill, 4 flutes, 60° diameter 6 mm TiAlN shank HB Universal Line chamfering deburring
The solid carbide end mills are suitable for universal use on a variety of materials.
CBN grinding disc 20mm B151 (medium) for stationary internal grinding
Electroplated diamond and CBN grinding discs are used for both wet and dry grinding.
Resin-bonded CBN grinding wheel 11V9 PHT 100 mm B126 (medium), for dry and wet grinding
Resin-bonded CBN grinding wheel for grinding tungsten carbide, HSS tools and other manufacturing applications. Suitable for dry and wet grinding.
CBN grinding disc resinoid 12V9 PHT 100mm B126 (medium) dry and wet grinding
Resinoid-bonded CBN grinding discs are often used for grinding tungsten carbide or HSS tools, as well as for other production grinding processes. They are used in both wet and dry grinding.
CBN cut-off wheel resinoid 1A1R PHT 100mm B151 (medium) dry grinding
Resinoid-bonded CBN grinding discs are often used for grinding tungsten carbide or HSS tools, as well as for other production grinding processes. They are used in both wet and dry grinding.
CBN grinding disc resinoid 4BT9 PHT 100mm B126 (medium) dry and wet grinding
Resinoid-bonded CBN grinding discs are often used for grinding tungsten carbide or HSS tools, as well as for other production grinding processes. They are used in both wet and dry grinding.
CBN grinding point cylindrical with radius end dia. 5.0 mm shank dia. 3 mm B126 (medium) ideal for manual application
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
CBN grinding point cylindrical dia. 0.5 mm shank dia. 3 mm B64 (fine) for grinding holes and radii
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
CBN grinding point Pointed tree dia. 3x7 mm shank dia. 3 mm B126 (medium) for engraving/grinding small holes
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
CBN grinding point conical pointed dia. 6x45 ° shank dia. 6 mm B64 (fine) for chamfering/deburring/countersinking
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
CBN grinding point ball dia. 1.0 mm shank dia. 3 mm B126 (medium) for engraving and deburring
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
CC-GRIND ROBUST SG STEELOX ★★★☆
CC-GRIND ROBUST SG STEELOX grinding disc for steel and stainless steel (INOX), with a ceramic oxide abrasive, high grinding performance and extended tool life.
CC-GRIND ROBUST grinding disc 115x22.23 mm Special Line SGP STEELOX for steel/stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
CC-GRIND FLEX grinding disc 115x22.23 mm COARSE Performance Line SG STEEL for steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
CC-GRIND FLEX grinding disc 115x22.23 mm COARSE Special Line SGP STEEL for steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
Clamping flange set SFS CC-GRIND SOLID/FLEX 100 M10
The CC-GRIND clamping flange set optimally aligns the CC-GRIND SOLID and FLEX in the angle grinder protective guard. This means that the grinding discs can be positioned so that they are particularly flat against the workpiece, therefore maximizing efficiency.
CC-GRIND SOLID grinding disc 115x22.23 mm COARSE Performance Line SG INOX for stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
CC-GRIND SOLID grinding disc 115x22.23 mm COARSE Performance Line SG STEEL for steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
CC-GRIND SOLID grinding disc 115x22.23 mm COARSE Special Line SGP INOX for stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
CC-GRIND SOLID grinding disc 115x22.23 mm COARSE Special Line SGP STEEL for steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
CC-GRIND STRONG grinding disc 115x22.23 mm COARSE Performance Line SG STEEL for steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
CC-GRIND VIEW grinding disc 125x22.23 mm Special Line SGP STEELOX for steel/stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
double nipple DN 1/2-1/2
Connecting fittings for air grinders.
double nipple DN 1/4-1/4
Connecting fittings for air grinders.
dressing stone 30x50x120mm SiC30/60 for profiling and dressing
Dressing stone with two different grit sizes. The coarse top side is for profiling and dressing large mounted points with coarse bonds and grit. The fine underside is for profiling and dressing mounted points with fine bonds and grit.
Hook and loop disc set fine compact grain 20-piece dia. 125 mm CK180,240,320,400 for angle grinders
PFERD TOOLS offers a wide selection of coated abrasive tools for working on different workpiece geometries and materials. They consist of a base, a base bond and a coating bond for the abrasive grain to adhere to. Depending on the grit size, coated abrasive tools can achieve a high stock removal rate or a very fine surface finish.
Hook-and-loop discs KR diameter 115 mm A1000 CK, compact grain, for precision grinding with angle grinders
Compact-grain hook-and-loop disc KR, diameter 115 mm, A1000 CK abrasive, for precision grinding with angle grinders. Maximum speed: 5300 RPM.
Arbor for grinding tools with hole dia. 20 mm clamping range 10-50 mm shank dia. 12 mm
Bolts and shanks for mounting fine-grinding and polishing tools are available with different threads and shank diameters and in different versions.
COMBICLICK pressed non-woven disc CC PNER dia. 100mm hard A fine for finishing
The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. With the backing pad, COMBICLICK tools can be used on commercially available angle grinders. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material.
COMBICLICK hard non-woven disc CC dia. 100 mm A100G for fine grinding and finishing with an angle grinder
The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. With the backing pad, COMBICLICK tools can be used on commercially available angle grinders. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material.
COMBICLICK soft non-woven disc CC dia. 100 mm A180 for cleaning and satin finishing with an angle grinder
The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. With the backing pad, COMBICLICK tools can be used on commercially available angle grinders. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material.
COMBICLICK aluminium oxide fibre disc dia. 100mm A120 for general use
The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. With the backing pad, COMBICLICK tools can be used on commercially available angle grinders. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material.
COMBICLICK ceramic oxide grain fibre disc dia. 125 mm CO-COOL120 CONTOUR for contours
The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. With the backing pad, COMBICLICK tools can be used on commercially available angle grinders. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material.
COMBICLICK felt discs CC-FR dia. 100mm for pre-polishing and high-gloss polishing with an angle grinder
The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. With the backing pad, COMBICLICK tools can be used on commercially available angle grinders. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material.
COMBICLICK POLICLEAN PCLD non-woven cleaning fabric dia. 115x13 mm for coarse cleaning work
For coarse cleaning work, such as removing paint, scale, heat discolouration, rust and adhesive residue in face-down grinding on large areas.
COMBICLICK set 19-piece dia. 115 mm 5/8-11 coarse to polished working with an angle grinder
The COMBICLICK system consists of a specially developed backing pad and a rugged mounting system at the back of the tool. With the backing pad, COMBICLICK tools can be used on commercially available angle grinders. The unique geometry of the cooling slots ensures high air throughput, which in turn considerably reduces the thermal load on the abrasive material and the workpiece. Compared with conventional tools, the quick-mounting system, robust holder, secure tool-locking feature and integrated cooling system together achieve a workpiece temperature that is 30 % lower, a 25 % higher stock removal rate, a 30 % longer tool life, and better utilization of the abrasive material.
COMBIDISC aluminium oxide abrasive disc CD dia. 20mm A120 for general use
For general coarse to fine grinding applications in industry and professional trades.
COMBIDISC aluminium oxide abrasive disc CD dia. 60mm A120 CONTOUR for contours
Very flexible and adaptable on account of the outer contour. Cutting into the workpiece is avoided.
COMBIDISC ceramic oxide grain mini fibre disc CDFR dia. 38 mm CO-COOL120 for backward grinding
For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
COMBIDISC pressed non-woven disc CD PNER dia. 50mm hard A fine for finishing
For achieving a very fine, uniform surface finish which, depending on requirements, is a sufficient preparation for high-gloss polishing.
COMBIDISC hard non-woven disc CD dia. 20 mm A100G for fine grinding and finishing
Suitable for general work on small and medium-sized metal surfaces, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.
COMBIDISC soft non-woven disc CD dia. 38 mm A100 for cleaning and satin finishing
Suitable for very fine grinding on small and medium-sized surfaces and contours, and for cleaning metal and painted surfaces. Achieve matt and satin-finished surfaces. Highly open structure.
COMBIDISC hard non-woven disc CD 35x35 mm A100G for fine grinding and finishing
Suitable for very fine grinding on small and medium-sized surfaces and contours, and for cleaning metal and painted surfaces. Achieve matt and satin-finished surfaces. Highly open structure.
COMBIDISC felt discs CD-FR dia. 50mm for pre-polishing and high-gloss polishing
Suitable for polishing with polishing paste bars, grinding pastes or diamond polishing pastes in face-down grinding on small and medium-sized surfaces.
COMBIDISC abrasive disc CD dia. 38 mm VICTOGRAIN-COOL60 for steel and stainless steel
Exceptionally well-suited to surface and edge grinding. The fibre backing strengthens the abrasive disc and improves stock removal.
COMBIDISC aluminium oxide Mini-POLIFAN CD dia. 50mm A120 for general use
For general coarse grinding work with high stock removal rates. Ideal for dressing weld seams in hard-to-reach places.
COMBIDISC aluminium oxide Mini-POLIFAN CD-FLEX dia. 50mm A40 for general use
For general coarse grinding work with high stock removal rates. Ideal for dressing weld seams in hard-to-reach places.
COMBIDISC POLICLEAN discs CD dia. 50mm non-woven cleaning fabric for coarse cleaning work
For coarse cleaning work, such as removing paint, scale, heat discolouration, rust and adhesive residues in face-down grinding.
COMBIDISC SET 22-piece dia. 50mm
Set of different COMBIDISC tools with a diameter of 50 mm.
Core SE 11 DIN 15/G28
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
CORINOX precision file high surface hardness square 150mm Swiss cut 0, coarse
CORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX pottance file high surface hardness hand 150mm Swiss cut 0, coarse
CORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX precision file high surface hardness three square 200mm Swiss cut 0, coarse
CORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX precision file high surface hardness half-round 150mm Swiss cut 0, coarse
CORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX precision file high surface hardness round 200mm Swiss cut 0, coarse
CORINOX files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX needle file high surface hardness flat 180mm Swiss cut 0, coarse
CORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX needle file high surface hardness square 180mm Swiss cut 0, coarse
CORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX needle file high surface hardness hand 180mm Swiss cut 0, coarse
CORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX needle file high surface hardness three square 180mm Swiss cut 0, coarse
CORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX needle file high surface hardness half-round 180mm Swiss cut 0, coarse
CORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
CORINOX needle file high surface hardness round 180mm Swiss cut 0, coarse
CORINOX needle files have an exceptional surface hardness grade of 1,200 HV (Vickers scale) and can be used to file very small and delicate components with precision.
Sanding stick 4-piece set. SF-R 180x19x5 mm SIC 80, 120, 240, 320 for fine grinding & finishing
Flexible sanding sticks are excellently suited for use in engine construction and turbine construction as well as in tool and mould-making. The different grit sizes enable different surface quality levels from coarse to very fine to be successively achieved.
Wheel brush knotted RBG dia. 100x12 mm M14 steel wire dia. 0.50 mm angle grinders
Aggressive brush. Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams, removal of adhesive residues and spatter.
PIPELINE brush knotted RBG dia. 115x6 hole 22.2 mm/X-LOCK steel wire dia. 0.50 mm angle grinders
Aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction.
COMBITWIST PIPELINE brush knotted RBG dia. 125x6x22.2 mm steel wire dia. 0.50 mm angle grinders
Very aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction.
COMBITWIST PIPE brush INOX-TOTAL RBGIT dia. 115x6x22.2 mm stainless steel wire dia. 0.50 mm angle grinders
Very aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction.
COMBITWIST wheel brush knotted RBG dia. 115x12x22.2 mm stainless steel wire dia. 0.35 mm angle grinders
Aggressive and robust brush that is able to withstand high mechanical loads. Suitable for all heavy-duty stationary and automated brushing, e.g. deburring work. Suitable for work on corners and edges as the knots are less likely to unravel.
POS COMBITWIST wheel brush knotted RBG HD dia. 115x12x22.2 mm stainless steel wire dia. 0.35 mm angle grinders
With a higher filament density and more wire filament, the tool life is at least three times longer and stock removal is improved. Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter.
COMBITWIST INOX-TOTAL wheel brush RBGIT dia. 115x12x22.2 mm stainless steel wire dia. 0.35 mm angle grinders
Very aggressive brush. Suitable for heavy-duty brushing such as removal of heat discolouration, deburring, cleaning of weld seams and removal of adhesive residues and spatter.
Wheel brush knotted RBG dia. 190x30x22.2 mm hole stainless steel diamond wire grit 270 stationary
The knots of the brush are knotted to 50% of the length.
INOX-TOTAL wheel brush knotted RBGIT dia. 70x6 mm shank dia. 6 mm stainless steel wire dia. 0.30
Generally suitable for cleaning, deburring, and removal of heat discolouration.
POS wheel brush knotted RBG dia. 76x6 mm shank dia. 6 mm stainless steel wire dia. 0.35 mm (10)
Aggressive brush for cleaning, derusting and work on weld seams.
Wheel brush crimped RBU dia. 115x12 mm M14 stainless steel wire dia. 0.30 angle grinders
Suitable for medium-duty brushing such as derusting, cleaning of weld seams and light deburring work.
Deburring brush crimped RBU dia. 250x100x50.8 mm hole stainless steel wire dia. 0.35 mm stationary
Particularly suitable for deburring pipes, cut edges and small parts on stationary machines.
wheel brush wide crimped RBU dia. 100x28xvariable hole steel wire dia. 0.30 bench grinder
Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces.
wheel brush wide crimped RBU dia. 100x20xvariable hole stainless steel wire dia. 0.30 bench grinder
Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces.
Wheel brush slim crimped RBU dia. 100x12x12 mm hole plastic filament dia. 0.40
With PFERD TOOLS special wire, characterized by high bending fatigue strength.
INOX-TOTAL wheel brush crimped RBUIT dia. 30x6 mm shank dia. 6 mm stainless steel wire dia. 0.20
Generally suitable for cleaning, deburring, and removal of heat discolouration.
COMPOSITE wheel brush RBUP dia. 150x13x50.8 mm hole ceramic filament dia. 1.10 mm grit 120 stationary
Particularly aggressive brush. Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing, as well as for working on surfaces. Developed specially for industrial use.
COMPOSITE FLEX wheel brush RBUP dia. 200x13x50.8 mm ceramic filament dia. 1.10 mm grit 120 stationary
Particularly flexible brush. Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing. Developed specially for industrial use.
Miniature wheel brush RBU dia. 16x2 mm shank dia. 2.34 mm black boar bristle
Suitable for light brushing such as deburring, cleaning and polishing.
Wheel brush WBU dia. 100x100x19.1 mm hole stainless steel wire dia 0.20 burnishing machine
Excellent for surface structuring work on workpieces with large surfaces.
POLISCRATCH wheel brush crimped RBU dia. 100x20mm M14 steel wire dia. 0.60 angle grinders
Excellent for processing and removing soft materials such as underseal and anti-drumming compound. Most suitable for achieving rough surfaces with a sandblasted appearance due to the specific geometry of the filament material.
POS wheel brush crimped RBU dia. 100x10 mm shank dia. 6 mm stainless steel wire dia. 0.30 (10)
Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint.
encapsulated wheel brush crimped RBV dia. 63x7 mm shank dia. 6 mm steel wire dia. 0.30
Particularly aggressive brushing effect for heavy-duty brushing.
Wheel brush crimped RBU dia. 115x15 mm M14 stainless steel cord wire dia. 0.25 mm angle grinders
Suitable for medium-duty brushing such as derusting, cleaning of weld seams and light deburring work.
Wheel brush crimped RBU dia. 100 mm shank dia. 6 mm BLUE filament dia. 1.10 mm grit 180 power drills
Generally suitable for cleaning, derusting, smoothing, cleaning of weld seams, light deburring, and removal of corrosion and paint. Specially developed for use with low rotational speeds on cordless drills and power drills.
Hard felt wheel in lens shape dia. 17x5 centre mm hole dia. 2 mm for general polishing work
Felt lenses are mainly used peripherally.
drive arbor LSS 1 for bimetal hole saw dia. 14 to 30mm
PFERD TOOLS offers shanks for hole saws in a variety of versions. These are adapted to the respective dimensions of the hole saw. Arbor extensions which are suitable for work on hard-to-reach components, for example, are available.
Repair set for bimetal hole saws with ejection spring, screws, hexagon socket wrench
With the service sets from PFERD TOOLS, the most common parts can be replaced in case of loss or damage. PFERD TOOLS offers both a repair set for hole saw arbors and service sets for the ALUMASTER High Speed Disc and the High Speed Torus Cutter.
Adapter for bimetal hole saws LSA for hole saw dia. 32 to 38 mm
PFERD TOOLS offers adapters for hole saws for various applications. The adapter LSA enables the mounting of hole saws LS 32 to LS 38 with the hole saw arbors LSS 1 and LSS 4. With the adapter sets AS-PSL 14-30 and AS-PSL 32-152, it is possible to change between different hole saws quickly and easily.
Adapter for quick-mounting system PSL 8.5 and PSL 11 for hole saw dia. 102 to 210 mm, Heavy Duty
PFERD TOOLS offers adapters for hole saws for various applications. The adapter LSA enables the mounting of hole saws LS 32 to LS 38 with the hole saw arbors LSS 1 and LSS 4. With the adapter sets AS-PSL 14-30 and AS-PSL 32-152, it is possible to change between different hole saws quickly and easily.
quick-mounting system PSL 11 for bimetal hole saws
The quick-mounting system for hole saws is part of a clamping system that PFERD TOOLS designed for the quick and easy use of HSS hole saws. In conjunction with three-piece adapter sets, which have been tailored to the hole saw diameters, it is possible to use PFERD TOOLS HSS hole saws easily and conveniently on all conventional power drills.
arbor extension for bimetal hole saws SVL-300 300mm for hole saw arbor
PFERD TOOLS offers shanks for hole saws in a variety of versions. These are adapted to the respective dimensions of the hole saw. Arbor extensions which are suitable for work on hard-to-reach components, for example, are available.
Cloth ring TR flannel dia. 100x10 mm centre hole dia. 10 mm for mirror polishing and buffing with polishing paste
Cloth rings are used for pre-polishing and high-gloss polishing with polishing pastes.
Accessory arbor BO for composite disc brushes dia. 125-150 mm with hole 22.2 on 12 mm shank
This arbor enables the use of composite disc brushes with arbor hole on tool drives with collet, e.g. electric straight grinders and flexible shaft drives.
Flap grinding wheel FR dia. 100x30 mm centre hole dia. 25.4 mm A120 for general use
On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure. Their flexibility enables them to adapt perfectly to the contours of the workpiece. The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond.
High-performance cutter TORUS CUTTER dia. 20x60 mm with DEPO mounting M10 for robots, aluminium machining
The High Speed Torus Cutter is an unparalleled tool for use on robots with an extremely high stock removal rate. Unlike grinding tools, the cutter does not generate hazardous or explosive dust, making it ideal for a variety of applications on aluminium materials. Thanks to its compact design, the High Speed Torus Cutter is the ideal tool for working in hard-to-reach areas and on delicate points such as grooves, pockets and tight radii and contours. The High Speed Torus Cutter is used with two tungsten carbide cutting inserts.
Adjust. depth gauge TBL 24 for def. checks of the depth limit distance on saw chains with pitch 1/4", 3/8“ LP, .325“, 3/8“,.404
The specially developed adjustable depth gauge enables the distance between the saw tooth and depth gauge to be checked, and is the ideal aid for individually setting the depth limit of the saw chain and achieving optimum sharpening results for wood saw work.
depth gauge file hand 150mm cut 2 for saw chains (10)
Depth gauge files are flat rectangular sharpening files that enable precise re-sharpening of depth gauges on saw chains. Depth gauge files are also available that are suitable for the different chain saw sharpeners from PFERD TOOLS.
Support TSA L 1400
Matching accessories for RUER flexible shaft drive.
Arbor shank dia. 6 mm for aluminium cutters with female thread M 10
PFERD TOOLS offers matching arbors for HSS rotary cutters and ALUMASTER high speed discs.
coupling VKI 1/2
Connecting fittings for air grinders.
coupling VKI 1/4
Connecting fittings for air grinders.
Diamond cut-off wheel D1A1R 230x3.8x22.23 mm D852 (very coarse) for grey and nodular cast iron
Electroplated diamond cut-off wheels are used for both wet and dry grinding.
Diamond grinding point conical 12x25x6 mm D852 for grinding grey and nodular cast iron
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point oval shape 16x25x8 mm D852 for grinding grey and nodular cast iron
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point tree shape with radius end dia. 12.0 mm shank dia. 6 mm D852 (very coarse) for grinding
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point cylindrical with radius end dia. 10.0 mm shank dia. 6 mm D852 (very coarse) for deburring
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point cylindrical dia. 16.0 mm shank dia. 8 mm D852 (very coarse) for grinding grooves
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
revolving nozzle 1/2"
Connecting fittings for air grinders.
Revolving nozzle in 1/4"
Connecting fittings for air grinders.
Revolving nozzle in 3/4"
Connecting fittings for air grinders.
Revolving nozzle in 3/8"
Connecting fittings for air grinders.
Solid carbide end mill dia. 6 mm, 4 flutes, for roughing, 2xDC, chamfer 0.15 mm, AlCrN coating, HB shank, Universal
The solid carbide end mills are suitable for universal use on a variety of materials.
Direct connection DA 27 DIN10/G22
For direct (rigid) connection of handpieces with the sliding coupling (G) to flexible shaft drive motors with DIN 10 connection. Can be used as shortest rigid extension.
COMBIDISC aluminium oxide abrasive disc CD 35x35 mm A120 for general use
Square abrasive discs for general coarse to fine grinding applications in industry and professional trades. Achieve coarse to fine surfaces with a linear surface finish.
Multi Power carbide cut-off wheel DS 125x1.2x22.23 mm for cutting all kinds of materials
General-purpose cut-off wheel for effective cutting of many different materials, such as wood with embedded nails, plastics (e.g. pipes), non-ferrous metals and drywall construction materials. The cutting edge made of sharp tungsten carbide grains achieves clean, precise cuts.
precision needle file flat 140mm Swiss cut 0, coarse
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
Handpiece HA 10 G28 with 6 mm collet max. RPM 18,000
Much more ergonomic straight handpiece.
Handpiece HA 12 G28 with 6 mm collet max. RPM 18,000
Much more ergonomic straight handpiece. With clamping nut for maximum clamping force and collets up to 12 mm available.
Handpiece HA 4 G16 with 6 mm collet max. RPM 40,000
Much more ergonomic straight handpiece.
Handpiece HA 6 Z DPF/SRF with 6 mm collet max. RPM 18,000
Straight handpiece, can be connected to flexible shafts, with handpiece-side coupling DPF/SRF (DPF = fixed duplex spring, SRF = flexible expansion ring).
Handpiece HA 6 Z SP 3.0 DPF/SRF with 3 mm collet max. RPM 18,000
Straight handpiece, can be connected to flexible shafts, with handpiece-side coupling DPF/SRF (DPF = fixed duplex spring, SRF = flexible expansion ring).
Handpiece HA 7 G22 with 6 mm collet max. RPM 25,000
Much more ergonomic straight handpiece.
Straight handpiece HA 7 G22 with 6 mm collet and clamping nut max. RPM 25,000
Much more ergonomic straight handpiece.
5x cut-off wheels EHT 76x1.0x10 mm flat PSF STEELOX for steel/stainless steel with 1x clamping bolt
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
Accessory for EDGE FINISH system for work on edges replacement guide bearing 30 °
In conjunction with innovative tool systems from PFERD TOOLS, the specially developed cutting inserts are characterized by a long tool life and optimal stock removal rate.
EDGE FINISH cutting insert set
Indexable carbide cutting inserts for working on edges with the EDGE FINISH system, suitable for aluminium and plastics.
Accessory for EDGE FINISH system for work on edges cutting insert holder 30 ° chamfer
In conjunction with innovative tool systems from PFERD TOOLS, the specially developed cutting inserts are characterized by a long tool life and optimal stock removal rate.
EG01 – Flat Chisel FM
Flat chisel with a 150 mm working length and 15 mm cutting edge width, cutting group EG01.
Flat chisel with working length of 125 mm x 15 mm cutting width / insertion group EG02
Flat chisel with 125 mm (working length) x 15 mm (cutting width) from insertion group 02.
Wide chisel with working length of 125 mm x 15 mm cutting width / insertion group EG02
Wide chisel with 125 mm (working length) x 15 mm (cutting width) from insertion group 02.
Pointed chisel with working length 125 mm / insertion group EG02
Pointed chisel with 125 mm (working length) from insertion group 02.
Flat chisel with working length of 135 mm x 20 mm cutting width / insertion group EG03
Flat chisel with 135 mm (working length) x 20 mm (cutting width) from insertion group 03.
Pointed chisel with working length 150 mm / insertion group EG02
Pointed chisel with 150 mm (working length) from insertion group 03.
Flat chisel with working length of 200 mm x 15 mm cutting width / insertion group EG05
Flat chisel with 200 mm (working length) x 15 mm (cutting width) from insertion group 05.
Pointed chisel with working length 200 mm / insertion group EG05
Pointed chisel with 200 mm (working length) from insertion group 05.
Flat chisel with working length of 190 mm x 20 mm cutting width / insertion group EG06
Flat chisel with 190 mm (working length) x 20 mm (cutting width) from insertion group 06.
Wide chisel with working length of 200 mm x 60 mm cutting width / insertion group EG06
Wide chisel with 200 mm (working length) x 60 mm (cutting width) from insertion group 06.
Pointed chisel with working length 260 mm / insertion group EG06
Pointed chisel with 260 mm (working length) from insertion group 06.
Flat chisel with working length of 260 mm x 30 mm cutting width / insertion group EG07
Flat chisel with 260 mm (working length) x 30 mm (cutting width) from insertion group 07.
Pointed chisel with working length 250 mm / insertion group EG07
Pointed chisel with 250 mm (working length) from insertion group 07.
Flat chisel with working length of 250 mm x 25 mm cutting width / insertion group EG08
Flat chisel with 250 mm (working length) x 25 mm (cutting width) from insertion group 08.
Pointed chisel with working length 250 mm / insertion group EG08
Pointed chisel with 250 mm (working length) from insertion group 08.
Ergonomic file handle FH1 set with gauges 25/30-30/35 ° for chain saw file dia. 4.0-5.5 mm
The set consists of an ergonomic file handle for chain saw files as well as two chain saw gauges: an angle of 25 °/30 ° and an angle of 30 °/35 °. The chain saw gauge supports consistent sharpening results by providing the correct sharpening angle. It is attached to the stud of the ergonomic file handle FH 1 KSF.
file set with handle 3-piece 200mm file assortment for discerning DIY users/craftspeople
Quality files designed to meet the needs of DIY users in a protective cardboard box. Precise versions with a high stock removal rate and a long tool life. Also suitable for sharpening. Each file comes with an ergonomic file handle.
plastic sleeve for storing files suitable for file length 150mm
PFERD TOOLS files in industrial packaging are traditionally rolled in paper which protects them against corrosion. In addition to the industrial packaging units, PFERD TOOLS also offers files in promotional point-of-sale packaging. It is designed to perfectly present the products at the PFERD TOOLS CENTER.
Scratch brush for spark plugs HBZ 3 rows brass wire dia. 0.15 mm (10)
PFERD TOOLS offers an extensive range of scratch brushes with various shapes and filament materials.
Scratch brush for fillet welds HBK 3 rows stainless steel wire dia. 0.35 mm (10)
PFERD TOOLS offers an extensive range of scratch brushes with various shapes and filament materials.
file brush HBF steel wire dia. 0.30 mm
PFERD TOOLS offers an extensive range of scratch brushes with various shapes and filament materials.
Scratch brush with long handle HBU 3 rows steel wire dia. 0.35 mm suitable for general use
PFERD TOOLS offers an extensive range of scratch brushes with various shapes and filament materials.
Scratch brush for precision mechanics HBFM 4 rows stainless steel wire dia. 0.15 mm
PFERD TOOLS offers an extensive range of scratch brushes with various shapes and filament materials.
scratch brush curved HBG 1 row stainless steel wire dia. 0.30 (10)
PFERD TOOLS offers an extensive range of scratch brushes with various shapes and filament materials.
scratch brush with plastic body and ergonomic handle HBUP 2 rows stainless steel wire dia. 0.40
PFERD TOOLS offers an extensive range of scratch brushes with various shapes and filament materials.
Block brush with handle HBB 8 rows steel wire dia. 0.45 mm
Wire brush with handle for general cleaning work on large surfaces.
scratch brush HBU 2 rows stainless steel wire dia. 0.30 suitable for general use
PFERD TOOLS offers an extensive range of scratch brushes with various shapes and filament materials.
Bimetal hole saw set Co8/M42 14-piece for electricians Germany
The set contains nine HSS hole saws in the most common diameters, including accessories, for electricians in Germany. It is supplied in a well-arranged plastic box which protects against dirt and damage. Operating instructions are included. It is possible to use hole saws LS 32 and LS 38 with the LSA adapter and washer.
Bimetal hole saw set Co8/M42 10-piece for electricians international
The set contains six HSS hole saws in the most common international diameters, including accessories, for electricians. It is supplied in a well-arranged plastic box which protects against dirt and damage. Operating instructions are included. It is possible to use hole saw LS 35 with the LSA adapter and washer.
Electric straight grinder EGER 8/280 230 volts 28,000 RPM/750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Electric straight grinder EGER 8/90 230 volts 9,000 RPM/710 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Electric straight grinder EGER 8/280 E 230 volts 28,000 RPM/750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Diamond drilling aid for DPD 5-12 mm
Mobile drilling aid with suction cup for centring dry diamond drill bits on tiles and other smooth surfaces.
diamond escapement file set 5-piece 140mm D126 (medium) for small geometries on hard materials
The diamond escapement file set is supplied in a sturdy, practical plastic box which protects the tools from damage. This is ideal for keeping in the tool trolley or workbench.
diamond escapement file barrette 140mm D126 (medium) for small geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond escapement file square 140mm D126 (medium) for small geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond escapement file hand 140mm D126 (medium) for small geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond escapement file three square 140mm D126 (medium) for small geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond escapement file half-round 140mm D126 (medium) for small geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond escapement file round 140mm D126 (medium) for small geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond riffler file set 5-piece 150mm D126 (medium) for complex geometries
The diamond riffler file set is supplied in a sturdy, practical plastic box which protects the tools from damage. This is ideal for keeping in the tool trolley or workbench.
diamond riffler file square 150mm D126 (medium) for complex geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond riffler file hand DF 18 150mm D126 (medium) for complex geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond riffler file crossing oval straight 150mm D126 (medium) for complex geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond riffler file three square 150mm D126 (medium) for complex geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond riffler file round 150mm D126 (medium) for complex geometries on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
3-piece diamond cut-off wheel set 115x1.6/1.9 mm START Allround
The set contains three different cut-off wheels for the construction industry with 115 mm diameter. Version DS with segmented edge for fast cutting. Version DG with closed edge for convenient cutting (TURBO). Version DG FL with closed edge for very find cuts, e.g. tiles and glazed tiles.
Sharpening block 200x25 mm DSB for sharpening diamond cut-off wheels
The sharpening block is used to resharpen metal-bonded diamond cut-off wheels (e.g. after cutting lubricating materials).
Arbor for diamond cut-off wheels with centre hole dia. 10 mm, shank dia. 6 mm
Accessory for mounting diamond cut-off wheels up to and including a diameter of 75 mm.
Arbor for diamond cut-off wheels with centre hole dia. 1.7 mm, shank dia. 3 mm
Accessory for mounting diamond cut-off wheels up to and including a diameter of 75 mm.
Diamond cut-off wheel D1A1R 100x2.0x22.23 mm D427 (coarse) continuous coating for GRP/CRP
Electroplated diamond cut-off wheels are used for both wet and dry grinding.
Diamond cut-off wheel D1A1R 100x2.0x22.23 mm D427 (coarse) with protective segment for GRP/CRP
Electroplated diamond cut-off wheels are used for both wet and dry grinding.
Diamond cut-off wheel D1A1R 230x2.5x22.23 mm D427 (coarse) segmented for GRP/CRP
Electroplated diamond cut-off wheels are used for both wet and dry grinding.
diamond sheet 170mm D126 (medium) for work on large surfaces
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond handy file set 5-piece 215 mm D126 (medium) shank forged/can be used without a handle
Diamond handy file sets are supplied in a sturdy, practical plastic box which protects the tools from damage. This is ideal for keeping in the tool trolley or workbench.
diamond needle file set 11-piece 140mm D126 (medium) for hard materials
The diamond needle file set is supplied in a sturdy, practical plastic box which protects the tools from damage. This is ideal for keeping in the tool trolley or workbench.
diamond needle file set 5-piece 140mm D126 (medium) for hard materials
The diamond needle file set is supplied in a sturdy, practical plastic box which protects the tools from damage. This is ideal for keeping in the tool trolley or workbench.
Diamond grinding point cylindrical dia. 0.42 mm shank dia. 3 mm D46 (fine) for grinding holes/radii
Very well suited to removing contamination from small holes in hard-to-reach places. The coating area is flexible thanks to the special tool geometry. Suitable for both manual applications and hand-guided rotating applications.
diamond needle file feather edge 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file barrette 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file knife 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file flat 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file square 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file hand 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file hand round edge 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file crossing oval 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file three square 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file half-round 140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond needle file round dia. 3.2x140mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond needle set 8-piece dia. 0.42-0.72 mm shank dia. 3 mm D46/64 (fine)
The set contains eight diamond needles, split into four pairs. The sturdy plastic box protects the tools against dirt and damage.
Diamond grinding point flame-shaped 16x35x8 mm D852 for grinding grey and nodular cast iron
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond dresser dia. 6x81 mm 0.2 carat for profiling and dressing mounted points
Long-life diamond dresser with large single grit diamond for profiling and dressing mounted points, grinding discs and Poliflex grinding points.
Diamond dished grinding wheel DCW 2R 100x6x22.23 mm for levelling concrete and screed
Diamond grinding discs are efficient tools for smoothing uneven surfaces, e.g. removing tile adhesive and grinding concrete in preparation for tiling. They are also used for chamfering and edge breaking on stone.
Diamond dished grinding wheel DCW 1R 100x6x22.23 mm for levelling concrete and screed
Diamond grinding discs are efficient tools for smoothing uneven surfaces, e.g. removing tile adhesive and grinding concrete in preparation for tiling. They are also used for chamfering and edge breaking on stone.
CC-GRIND SOLID DIAMOND 100x16.0 mm D427 (coarse) for work on hard materials
The CC-GRIND SOLID-DIAMOND diamond grinding disc has been specially developed for applications on hard materials which cannot be machined with conventional tools made of aluminium oxide or silicon carbide.
DUODISC DIAMOND 125x22.23 mm D852 (very coarse) for work on hard materials
The DUODISC DIAMOND diamond grinding disc is exceptionally well-suited to machining grey cast iron and nodular cast iron (GG and GGG or GJL and GJS). Ideal for roughing and deburring work in fettling shops. The coating geometry enables small feeders and risers to be separated.
Diamond grinding wheels, shape 1A1
Diamond grinding wheel for fixed internal grinding, 18 mm, D151 (medium), with an 8 mm bore and 10 mm thickness.
Diamond grinding disc resinoid 11A2/ 60 ° PHT 115 mm D126 (medium) dry grinding
Resinoid-bonded diamond grinding discs are often used for grinding tungsten carbide or HSS tools, as well as other production grinding processes. They are used in both wet and dry grinding.
Diamond grinding disc resinoid 11V9 PHT 125 mm D126 (medium) dry grinding
Resinoid-bonded diamond grinding discs are often used for grinding tungsten carbide or HSS tools, as well as other production grinding processes. They are used in both wet and dry grinding.
Diamond grinding disc resinoid 12A2/ 45 ° PHT 178 mm D126 (medium) dry grinding
Resinoid-bonded diamond grinding discs are often used for grinding tungsten carbide or HSS tools, as well as other production grinding processes. They are used in both wet and dry grinding.
Diamond grinding disc resinoid 12C9 PHT 115 mm D126 (medium) dry grinding
Resinoid-bonded diamond grinding discs are often used for grinding tungsten carbide or HSS tools, as well as other production grinding processes. They are used in both wet and dry grinding.
diamond grinding disc resinoid 12V9 PHT 230mm D126 (medium) dry grinding
Resinoid-bonded diamond grinding discs are often used for grinding tungsten carbide or HSS tools, as well as other production grinding processes. They are used in both wet and dry grinding.
diamond cut-off wheel 1A1R 100x1.0x20.0mm PHT D151 (medium) for dry grinding
Resinoid-bonded diamond grinding discs are often used for grinding tungsten carbide or HSS tools, as well as other production grinding processes. They are used in both wet and dry grinding.
Diamond grinding disc resinoid 4BT9 PHT 125 mm D126 (medium) dry grinding
Resinoid-bonded diamond grinding discs are often used for grinding tungsten carbide or HSS tools, as well as other production grinding processes. They are used in both wet and dry grinding.
Diamond grinding point cup type dia. 3x8 ° shank dia. 3 mm D126 (medium) for grinding planar surfaces and ledges
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point ball dia. 3.0 mm shank dia. 3 mm D181 (coarse) for deburring profiles
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point cylindrical slim dia. 14x0.5 mm shank dia. 3 mm D64 (fine) for grinding grooves
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point cylindrical with radius end dia. 5.0 mm shank dia. 6 mm D126 (medium) ideal for manual application
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding points set 10-piece shank dia. 3 mm D126 (medium)
The set contains ten diamond grinding points with grit size D 126 in the most common shapes and dimensions. The sturdy plastic box protects the tools against dirt and damage.
Diamond grinding point cylindrical dia. 0.5 mm shank dia. 3 mm D64 (fine) for grinding holes and radii
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point pointed tree dia. 3x13 mm shank dia. 3 mm D126 (medium) for engraving/grinding small holes
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point conical pointed dia. 10x60 ° shank dia. 6 mm D126 (medium) for chamfering/deburring/countersinking
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
Diamond grinding point ball dia. 1.0 mm shank dia. 3 mm D126 (medium) for engraving and deburring
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
diamond machinist's file square 200mm D151 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond machinist's file hand 100mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond machinist's file three square 100mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond machinist's file half-round 100mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
diamond machinist's file round 200mm D151 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond handy file square 215 mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond handy file hand 215 mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond handy file three square 215 mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond handy file half-round 215 mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond handy file round 215 mm D126 (medium) for hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Sharpening block 100x24 mm SBL for resinoid-bonded diamond/CBN grinding discs
The sharpening block is used to restore the sharpness of resinoid-bonded diamond and CBN grinding discs (e.g. after dressing with a diamond dressing tool).
diamond hand pads 55x90mm grit D126 medium for hard materials
Exceptionally suitable for work on wear-resistant coatings and for hard facings made of tungsten carbide, chromium carbide, titanium carbide, etc. Particularly recommended for work on materials used for aircraft engine construction, e.g. Hastelloy, Inconel and titanium/titanium alloys.
Ergonomic file handle FH1 120 mm for chain saw files dia. 4.0-5.5 mm
The PFERD TOOLS product range includes file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD TOOLS offers handles for a wide variety of files.
Self-closing valve couplings with male thread SVKA 1/4 DK
Connecting fittings for air grinders.
safety valve coupling SVKA 1/4 DK
Connecting fittings for air grinders.
coupling VKA 1/2
Connecting fittings for air grinders.
coupling VKA 1/2 NW12
Connecting fittings for air grinders.
coupling VKA 1/4
Connecting fittings for air grinders.
flexible sanding stick SF 180x28x5 mm SIC100 for general use
Flexible sanding sticks are excellently suited for use in engine construction and turbine construction as well as in tool and mould-making. The different grit sizes enable different surface quality levels from coarse to very fine to be successively achieved.
Flex. diamond file 165 mm D126 (medium) for convex/concave contours on hard materials
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
flexible shaft adapter BWA G22/DIN 10
Flexible shaft adapter for G22/DIN10 connection for coupling flexible shafts or as connector for rigid extensions.
Tin of flexible shaft grease FT4
The grease has special lubrication and adhesive properties for flexible shafts BW 4 to BW 12.
flexible shaft BW 6 Z DIN10/DPF without handpiece 24,000-11,000 RPM/1,460-600 watts
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
flexible shaft BW 6 Z DIN10/SRF without handpiece 24,000-11,000 RPM/1,460-600 watts
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Electric motor for flexible shaft EMER 8/280 BW 230 volts 28,000-8,500 RPM/750 watts
Drive systems with DIN 10/DIN 15 are multi-speed machines. They cover a wide rotational speed range and have stepless electronic adjustment to match individual tool requirements. The drives have very high drive outputs. They can also be used with compact handpieces or extensions to work in difficult-to-reach areas. The drives with rigid extensions are excellent solutions for customer-specific applications.
Electric motor for flexible shaft EMER 8/90 BW 230 volts 9,000-2,500 RPM/710 watts
Drive systems with DIN 10/DIN 15 are multi-speed machines. They cover a wide rotational speed range and have stepless electronic adjustment to match individual tool requirements. The drives have very high drive outputs. They can also be used with compact handpieces or extensions to work in difficult-to-reach areas. The drives with rigid extensions are excellent solutions for customer-specific applications.
Hose for remote control for flexible shaft FS-SCH 10 DIN10/G28 2M
Convenient operation from the workstation. Alternative to the foot switch. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated.
Remote control for flexible shaft FS-BW 10 DIN 10/G28 2M oHA 18,000-750 RPM
Convenient operation from the workstation. Alternative to the foot switch. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated.
Remote control for flexible shaft FS-BW 12 DIN10/G28 2M oHA 12,000-850 RPM
Convenient operation from the workstation. Alternative to the foot switch. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated.
Remote control for flexible shaft FS-BW 7 DIN10/G22 2M oHA 25,000-11,000 RPM
Convenient operation from the workstation. Alternative to the foot switch. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated.
Hose for remote control for flexible shaft FS-SCH 12 DIN10/G28 2M
Convenient operation from the workstation. Alternative to the foot switch. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated.
Hose for remote control for flexible shaft FS-SCH 7 DIN10/G22 2M
Convenient operation from the workstation. Alternative to the foot switch. After approximately 100 operating hours, the core of the flexible shaft must be re-lubricated.
Mammoth Electronic ME 22/240 400 volts 24,000-100 RPM/2,700 watts
The multi-speed machine with stepless regulation is powerful and is suitable for heavy-duty use.
Mammoth Electronic ME 22/150 400 volts 15,000-100 RPM/2,700 watts
The multi-speed machine with stepless regulation is powerful and is suitable for heavy-duty use.
Mammoth Electronic MEW 18/150 230 volts 15,000-100 RPM/2,000 watts
The multi-speed machine with stepless regulation is powerful and is suitable for heavy-duty use.
Mammoth Electronic MEW 18/240 230 volts 24,000-100 RPM/2,000 watts
The multi-speed machine with stepless regulation is powerful and is suitable for heavy-duty use.
Maxi-Mammoth Electronic MME 40/150 400 volts 15,000-100 RPM/6,100 watts
The multi-speed machine with stepless regulation is powerful and is suitable for heavy-duty use.
Mini-Mammoth Electronic MMEW 11/120 230 volts 12,000-800 RPM/1,100 watts
The multi-speed machine with stepless regulation is powerful and is suitable for heavy-duty use.
Record Universal Motor RUER 8/180 SI 230 volts 18,000-500 RPM/1,020 watts
The multi-speed machine with stepless regulation is powerful and is suitable for heavy-duty use.
Stand for the storage of fibre discs dia. 100 to 230 mm
Stand made from impact-resistant plastic for the secure storage of fibre discs exactly in line with their shape. The holder can be stood upright, as well as bolted to walls.
Fibre disc set 10-piece ceramic oxide grain dia. 125 mm CO-COOL36, 60, 80 with HGT backing pad stainless steel
PFERD TOOLS offers a wide selection of coated abrasive tools for working on different workpiece geometries and materials. They consist of a base, a base bond and a coating bond for the abrasive grain to adhere to. Depending on the grit size, coated abrasive tools can achieve a high stock removal rate or a very fine surface finish.
aluminium oxide fibre disc dia. 100mm A100 for general use
PFERD TOOLS fibre discs are manufactured in accordance with ISO 16057 in shape A1 version F under the designation "vulcanized fibre disc".
Flange for flap and POLINOX non-woven wheels dia. 150 and 165 mm hole dia. 12 mm can be expanded to dia. 22 mm
For mounting unmounted flap wheels and POLINOX grinding wheels on drive spindles. The clamping flanges are designed to lie countersunk in the tool.
Flange screw FLS 98980037
PFERD TOOLS offers different flange screws for attachment.
Frequency damper FD 47-13.5-29.6
PFERD TOOLS offers different frequency dampers to make use much easier on the ears.
Brake calliper file 150 mm x 12.5 mm milled cut with grip
Milled tooth files from PFERD TOOLS are particularly well-suited to coarse machining. The highly abrasive milled tooth geometry with large flutes prevents clogging.
file blade milled tooth hand 300mm cut 1, coarse stock removal of soft metals
Milled tooth file blades from PFERD TOOLS are particularly well-suited to coarse machining. The highly abrasive, milled tooth geometry with large flutes prevents clogging. The rectangular file blades have an angled cut with chip divider on the flat sides. The file blades are provided with two bores for mounting on the file holder.
file blade holder type 296 300mm for hand-type file blades, ergonomically shaped
PFERD TOOLS offers holders for a range of files and file blades. The PFERD TOOLS product range includes riffler file holders, adjustable holders for car body files and holders for file blades, tungsten carbide files and hand deburrers.
tang file milled hand 250mm cut 1, coarse stock removal on soft metals
Milled tooth files from PFERD TOOLS are particularly well-suited to coarse machining. The highly abrasive milled tooth geometry with large flutes prevents clogging.
tang file milled half-round hollow 250mm cut 1, coarse stock removal on soft metals
Milled tooth files from PFERD TOOLS are particularly well-suited to coarse machining. The highly abrasive milled tooth geometry with large flutes prevents clogging.
High-performance milling disc ALUMASTER F dia. 115 mm for angle grinders work on aluminium HICOAT
The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc. PFERD TOOLS also offers the cutting inserts with a premium-quality HICOAT coating for lubricating cast aluminium alloys with a silicon content of 5-10 %, abrasive cast aluminium alloys with a silicon content of over 15 %, and for other abrasive materials or non-ferrous metals. This prevents tool clogging and abrasive wear, even in use on these particularly demanding materials.
High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium HICOAT
The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc. PFERD TOOLS also offers the cutting inserts with a premium-quality HICOAT coating for lubricating cast aluminium alloys with a silicon content of 5-10 %, abrasive cast aluminium alloys with a silicon content of over 15 %, and for other abrasive materials or non-ferrous metals. This prevents tool clogging and abrasive wear, even in use on these particularly demanding materials.
High-performance milling disc ALUMASTER R dia. 115 mm for angle grinders work on aluminium HICOAT
The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc. PFERD TOOLS also offers the cutting inserts with a premium-quality HICOAT coating for lubricating cast aluminium alloys with a silicon content of 5-10 %, abrasive cast aluminium alloys with a silicon content of over 15 %, and for other abrasive materials or non-ferrous metals. This prevents tool clogging and abrasive wear, even in use on these particularly demanding materials.
High-performance milling disc ALUMASTER F dia. 115 mm for angle grinders work on aluminium
The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc.
High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium
The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc.
High-performance milling disc ALUMASTER R dia. 115 mm for angle grinders work on aluminium
The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc.
Tungsten carbide small burr set 1503 cut 3 PLUS 15-piece dia. 6/4/3 mm shank dia. 3 mm universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide small burr set 1501 cut 5 15-piece dia. 6/4/3/2 mm shank dia. 3 mm universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr conical pointed SKM dia. 06x18 mm shank dia. 6 mm Z1 universal coarse
Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z1 universal coarse
Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
Tungsten carbide burr tree shape with radius end RBF dia. 12x25 mm shank dia. 6 mm Z1 universal coarse
Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
Tungsten carbide burr conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z1 universal coarse
Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
Tungsten carbide burr cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm Z1 universal coarse
Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
Tungsten carbide burr pointed tree SPG dia. 06x18 mm shank dia. 6 mm Z1 universal coarse
Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
Tungsten carbide burr, ball KUD, 06x05 mm, 6 mm shank, Z1 Universal roughing
General-purpose tungsten carbide burr with ball-shaped KUD geometry and Cut 1 for rough and precision material removal on non-ferrous metals, steel and cast iron.
Tungsten carbide burr cylindrical ZYA dia. 10x20 mm shank dia. 6 mm Z1 universal coarse
Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
Tungsten carbide burr flame B dia. 08x20 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide concave radius burr V dia. 10x15 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr rim shape N dia. 25x03 mm shank dia. 8 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr conical counterbore KSJ 60 ° dia. 06x05 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr conical counterbore KSK 90 ° dia. 06x03 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr conical pointed SKM dia. 06x18 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr oval TRE dia. 12x20 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr flame B dia. 03x07 mm shank dia. 3 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide high-performance burr flame B dia. 03x07 mm shank dia. 3 mm Z3P HICOAT coated universal fine
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr conical pointed SKM dia. 03x07 mm shank dia. 3 mm Z3P HICOAT coated for finishing
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr oval TRE dia. 03x07 mm shank dia. 3 mm Z3P HICOAT coated universal medium cross cut
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-perf. burr tree shape with radius end RBF dia. 03x07 mm shank dia. 3 mm Z3P HICOAT coated universal medium cross cut
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm Z3P HICOAT universal
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-perf. burr cylindrical with radius end WRC dia. 3x13 mm shank dia. 3 mm Z3P HICOAT coated universal medium cross cut
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr pointed tree SPG dia. 03x07 mm shank dia. 3 mm Z3P HICOAT coated universal medium cross cut
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ball KUD dia. 03x02 mm shank dia. 3 mm Z3P HICOAT coated for finishing
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr cylindrical ZYAS end cut dia. 06x07 mm shank dia. 3 mm Z3P HICOAT coated universal medium cross cut
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr cylindrical ZYA dia. 03x13 mm shank dia. 3 mm Z3P HICOAT coated universal medium cross cut
Cut 3 PLUS with HICOAT coating HC-FEP is characterized by its high hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide burr conical pointed SKM dia. 03x07 mm shank dia. 3 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr oval TRE dia. 03x07 mm shank dia. 3 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr tree shape with radius end RBF dia. 08x20mm shank dia. 6x150mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr conical shape with radius end KEL dia. 08x20 mm shank dia. 6 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr cylindrical with radius end WRC dia. 02x10 mm shank dia. 3 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr pointed tree SPG dia. 03x07 mm shank dia. 3 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr ball KUD dia. 1.5x1 mm shank dia. 3 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr cylindrical ZYAS end cut dia. 02x10mm shank dia. 3mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide inverted cone end cut WKNS dia. 03x07mm shank dia. 3mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr cylindrical ZYA dia. 02x10 mm shank dia. 3 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide inverted cone WKN dia. 03x07 mm shank dia. 3 mm Z3P universal medium cross cut
Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
Tungsten carbide burr tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr pointed tree SPG dia. 06x18 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr ball KUD dia. 06x05 mm shank dia. 6 mm Z3 universal medium cut
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr cylindrical ZYAS end cut dia. 06x16 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr cylindrical ZYA dia. 06x16 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr inverted cone WKN dia. 10x13 mm shank dia. 6 mm Z3 universal medium
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
Tungsten carbide burr conical pointed SKM dia. 03x11 mm shank dia. 3 mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr oval TRE dia. 08x13 mm shank dia. 6 mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr tree shape with radius end RBF dia. 06x13 mm shank dia. 3 mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr conical shape with radius end KEL dia. 08x20 mm shank dia. 6 mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr cylindrical with radius end WRC dia. 02x10 mm shank dia. 3 mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr pointed tree SPG dia. 03x13 mm shank dia. 3 mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr ball KUD dia. 03x02 mm shank dia. 3 mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr cylindrical ZYAS end cut dia. 02x10mm shank dia. 3mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr cylindrical ZYA dia. 02x10 mm shank dia. 3 mm Z4 universal medium fine
Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
Tungsten carbide burr flame B dia. 03x07 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr conical counterbore KSJ 60 ° dia. 16x13 mm shank dia. 6 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr conical counterbore KSK 90 ° dia. 16x08 mm shank dia. 6 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr conical pointed SKM dia. 03x07 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr oval TRE dia. 03x07 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr tree shape with radius end RBF dia. 03x07 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr cylindrical with radius end WRC dia. 02x10 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr pointed tree SPG dia. 03x07 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr ball KUD dia. 1.5x1 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr cylindrical ZYAS end cut dia. 02x10 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide inverted cone WKNS dia. 03x07 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide burr cylindrical ZYA dia. 02x10 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Tungsten carbide inverted cone WKN dia. 03x07 mm shank dia. 3 mm Z5 universal fine
Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
Bevel brush crimped KBU dia. 70x10 mm shank dia. 6 mm CO filament dia. 0.55 mm grit 120 backwards brushing
Excellent for medium-duty brushing such as deburring, cleaning and derusting.
Core SE 11 DIN10/G28
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Core SE 11 DIN10/G28 2M
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Core SE 12 DIN10/G28
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Core SE 12 DIN15/G28
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Core SE 4 DIN10/G16
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Core SE 4 PST-T DIN10/M4 1,5M
These special flexible shafts do not have a handpiece for tool mounting and are particularly flexible in the front section. The POLISTAR-TUBE grinding tools are attached directly to the core of the flexible shaft with screws (INOX type). POLINOX cross buffs PNST are screwed on with adapter AD M4 or AD M5 (accessories). This combination is highly suitable for gradual fine grinding and cleaning of inner surfaces of pipes and pipe bends. Both pipe bend ends can be deburred from the entry side.
Core SE 6 DIN10/G16
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Core SE 7 DIN10/G22
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Core SE 7 DIN10/G22 2M
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Core SE 7 PST-T DIN 10/M5 2 m
These special flexible shafts do not have a handpiece for tool mounting and are particularly flexible in the front section. The POLISTAR-TUBE grinding tools are attached directly to the core of the flexible shaft with screws (INOX type). POLINOX cross buffs PNST are screwed on with adapter AD M4 or AD M5 (accessories). This combination is highly suitable for gradual fine grinding and cleaning of inner surfaces of pipes and pipe bends. Both pipe bend ends can be deburred from the entry side.
Cut-off wheel metal circular saw T 300x2.8x25.4 mm Uni. Line PSF CHOP STEEL for steel
The PFERD TOOLS product range offers cut-off wheels for chopsaws (CHOPSAW) in different versions and dimensions. Cut-off wheels for chopsaws are used for cutting solid material, profiles and pipes.
Cut-off wheel metal circular saw T 300x2.8x25.4 mm Uni. Line PSF CHOP STEELOX steel/stainless steel
The PFERD TOOLS product range offers cut-off wheels for chopsaws (CHOPSAW) in different versions and dimensions. Cut-off wheels for chopsaws are used for cutting solid material, profiles and pipes.
Cut-off wheel T 350x3.4x25.4 mm Performance Line SG CHOP HD CAST+STONE cast material/stone/non-ferrous metals
The PFERD TOOLS product range offers cut-off wheels for chopsaws (CHOPSAW) in different versions and dimensions. Cut-off wheels for chopsaws are used for cutting solid material, profiles and pipes.
Cut-off wheel T 350x4.2x25.4 mm Performance Line SG CHOP HD STEEL for steel
The PFERD TOOLS product range offers cut-off wheels for chopsaws (CHOPSAW) in different versions and dimensions. Cut-off wheels for chopsaws are used for cutting solid material, profiles and pipes.
Cut-off wheel T 300x3.0x25.4 mm Performance Line SG CHOP HD STEELOX for steel/stainless steel
The PFERD TOOLS product range offers cut-off wheels for chopsaws (CHOPSAW) in different versions and dimensions. Cut-off wheels for chopsaws are used for cutting solid material, profiles and pipes.
Cut-off wheel metal circular saw T 300x2.8x25.4 mm Performance Li. SG CHOP STEEL for steel
The PFERD TOOLS product range offers cut-off wheels for chopsaws (CHOPSAW) in different versions and dimensions. Cut-off wheels for chopsaws are used for cutting solid material, profiles and pipes.
Cut-off wheel metal circular saw T 300x2.8x25.4 mm Performance Li. SG CHOP STEELOX steel/stainless steel
The PFERD TOOLS product range offers cut-off wheels for chopsaws (CHOPSAW) in different versions and dimensions. Cut-off wheels for chopsaws are used for cutting solid material, profiles and pipes.
Power supply unit RCK NT with universal IEC power connector
Electronic power supply unit with universal IEC power connector and dust-protected housing.
Stump vice for sharpening chain saws
Portable stump vice made from solid steel for sharpening saw chains in forests. It is driven into a tree stump or tree trunk and is used to secure the guide rail in place. It enables better sharpening results as the chain saw cannot slip out of place. The chain can be freely moved when sharpening.
Handpiece HA 10 G28 STV with 6 mm collet max. RPM 18,000 for rigid extension
Straight handpiece with 6 mm collet and G28/diameter 28 mm sliding coupling, suitable for rigid extensions with G28 sliding coupling.
Handpiece HA 12 G28 STV with 6 mm collet max. RPM 18,000
Straight handpiece with 6 mm collet and G28/diameter 28 mm sliding coupling, suitable for rigid extensions with G28 sliding coupling.
Handpiece HA 4 G16/G22 STV with 6 mm collet max. RPM 25,000
Straight handpiece with 6 mm collet and sliding coupling G16/dia. 22 mm.
Handpiece HA 7 G22 STV with 6 mm collet max. RPM 25,000
Straight handpiece with 6 mm collet and G22/diameter 22 mm sliding coupling, suitable for rigid extensions with G22 sliding coupling.
in-line fine filter SF24 STG-IG 1/4
Connecting fittings for air grinders.
in-line fine filter SF 35 IG1/2-IG1/2
Connecting fittings for air grinders.
fine saw file with handle three square 110mm cut 2 general for sharpening
Three square saw files from PFERD TOOLS are triangular tapered files with tang. The saw files are suitable for use on steel and cast steel and especially suitable for sharpening sawing tools. PFERD TOOLS offers three square saw files in various versions and shapes.
Air-powered chisel hammer PH 13 with fist grip insertion group EG03 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 13 with fist grip insertion group EG05 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 18 with fist grip insertion group EG03 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 18 with fist grip insertion group EG05 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 18 with fist grip SK insertion group EG05 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 23 with fist grip insertion group EG03 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 23 with fist grip insertion group EG05 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 34 with fist grip insertion group EG03 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 34 with fist grip insertion group EG05 lightweight up to 3.4 kg
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of lightweight pneumatic chisel hammers up to 3.4 kg. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 66 with fist grip SK insertion group EG06 up to 6.6 kg for heavy-duty use
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of pneumatic chisel hammers up to 6.6 kg and is suitable for heavy-duty use. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 66 with fist grip SK insertion group EG07 up to 6.6 kg for heavy-duty use
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of pneumatic chisel hammers up to 6.6 kg and is suitable for heavy-duty use. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 66 with fist grip SK insertion group EG08 up to 6.6 kg for heavy-duty use
The air hammer with fist grip has the exhaust air flow at the front. It falls into the category of pneumatic chisel hammers up to 6.6 kg and is suitable for heavy-duty use. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 8 with pistol grip insertion group EG01 lightweight up to 0.8 kg
The air hammer with front exhaust is equipped with a pistol grip and, with a weight of up to 0.8 kg, it falls into the category of lightweight pneumatic chisel hammers. The drive is equipped with a mounting for chisel tools.
Air-powered chisel hammer PH 8 with pistol grip insertion group EG02 lightweight up to 0.8 kg
The air hammer with front exhaust is equipped with a pistol grip and, with a weight of up to 0.8 kg, it falls into the category of lightweight pneumatic chisel hammers. The drive is equipped with a mounting for chisel tools.
Straight needle scaler with 18 needles
The air-powered needle scaler in the straight version has the exhaust air flow at the front.
Needle scaler with fist grip, 19 needles
The air-powered needle scaler with fist grip has the exhaust air flow at the front.
Needle scaler with fist grip, 28 needles
The air-powered needle scaler with fist grip has the exhaust air flow at the front.
Flat chisel with tungsten carbide insert in the 100 x 10 mm version
The chipping hammer is suitable for all tungsten carbide chisels. It features a chisel mounting with union nut.
Chipping hammer PH 8/90 HV number of blows: 9,000 bpm, stroke frequency: 150 Hz
The chipping hammer is suitable for all tungsten carbide chisels. It features a chisel mounting with union nut.
Air supply hose PLS 10 RS
Connecting fittings for robot spindles.
Air supply hose PLS 12 RS
Connecting fittings for robot spindles.
Air supply hose PLS 14 RS
Connecting fittings for robot spindles.
Air supply hose PLS 4 RS
Connecting fittings for robot spindles.
Air supply hose PLS 6 RS
Connecting fittings for robot spindles.
Air supply hose PLS 8 RS
Connecting fittings for robot spindles.
Compressed-air angle grinder PWA 11/120 HV for dia. 125 mm 12,000 RPM/1,100 watts
The drive has a threaded tool mounting for tools with female threads or flange mounting.
Compressed-air angle grinder PWA 1/5 V-HV HEX 1/4" 500 RPM/65 watts
The drive is equipped with a hex tool mounting.
Compressed-air angle grinder PWA 1/9 V-HV HEX 3 mm 900 RPM/35 watts
The drive is equipped with a hex tool mounting.
Compressed-air angle grinder PWA 2/120 DV 12,000 RPM/230 watts
The drive has a threaded tool mounting for tools with female threads or flange mounting.
Compressed-air angle grinder PWAS 1/250 25,000 RPM/110 watts
The drive is equipped with a collet tool mounting for mounted tools.
Compressed-air angle grinder PWAS 1/800 DV 80,000 RPM/75 watts
The drive is equipped with a collet tool mounting for mounted tools.
Compressed-air angle grinder PWAS 2/200 DV 20,000 RPM/230 watts
The drive is equipped with a collet tool mounting for mounted tools.
Compressed-air angle grinder PWAS 4/120 HV 12,000 RPM/370 watts
The drive is equipped with a collet tool mounting for mounted tools.
Compressed-air angle grinder PWAS 4/200 HV 20,000 RPM/370 watts
The drive is equipped with a collet tool mounting for mounted tools.
Compressed-air angle grinder PWAS 4/160 HV 16,000 RPM/370 watts
The drive is equipped with a collet tool mounting for mounted tools.
compressed-air angle grinder PWSA 4/200 HV 20,000 RPM/300 watts
The drive is equipped with a collet tool mounting for mounted tools.
compressed-air turbo angle grinder PWT 26/100 HV M14 for dia. 150mm 10,000 RPM/2,600 watts
Turbine motors perform consistently well in high rotational speed ranges. The compressed-air angle grinder with turbine motor has a threaded tool mounting for tools with female threads or flange mounting.
Compressed-air turbo angle grinder PWT 26/120 HV M14 for dia. 125 mm 12,000 RPM/2,600 watts
Turbine motors perform consistently well in high rotational speed ranges. The compressed-air angle grinder with turbine motor has a threaded tool mounting for tools with female threads or flange mounting.
compressed-air turbo angle grinder PWT 26/85 HV M14 for dia. 180mm 8,500 RPM/2,600 watts
Turbine motors perform consistently well in high rotational speed ranges. The compressed-air angle grinder with turbine motor has a threaded tool mounting for tools with female threads or flange mounting.
Compressed-air belt grinder PBA 2/200 HV belt length: 305 mm x width: 3-16 mm 22 m/s 230 watts
The exhaust direction the air grinder is at the back.
Compressed-air belt grinder PBA 2/200 HV oVA belt length: 305 mm x width: 3-16 mm 22 m/s 230 watts
The exhaust direction the air grinder is at the back.
Compressed-air belt grinder PBA 4/160 HV belt length: 520 mm x width: 3-20 mm 19.3 m/s 370 watts
The exhaust direction the air grinder is at the back.
Compressed-air belt grinder PBA 4/160 HV oVA belt length: 520 mm x width: 3-20 mm 19.3 m/s 370 watts
The exhaust direction the air grinder is at the back.
Belt grinder with belt grinder attachment BSVA 5/155-19/24 x 480 21 m/s 370 watts
The exhaust direction is at the front.
air-powered straight grinder PG 3/250 S 25,000 RPM/225 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PG 3/500 S 50,000 RPM/200 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PG 8/100 HV 10,000 RPM/600 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PG 8/160 HV 16,000 RPM/600 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PG 8/220 HV 22,000 RPM/600 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PG 8/50V-HV 5,000 RPM/600 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 10/120 HV 12,000 RPM/950 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 10/160 HV 16,000 RPM/1,000 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 10/200 HV 20,000 RPM/1,000 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 10/200 ME-HV 20,000 RPM/1,000 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 1/550 DV 55,000 RPM/100 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 1/600 DV 60,000 RPM/110 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 1/700 DV 70,000 RPM/100 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 1/750 DV 75,000 RPM/110 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 2/5 DS 500 RPM/160 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PGAS 2/600 E-DV 60,000 RPM/100 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 2/800 E-DV 80,000 RPM/110 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 3/35 HV 3,500 RPM/320 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PGAS 3/350 DV 35,000 RPM/290 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 3/350 V-DV 35,000 RPM/290 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 3/380 E-DV 38,000 RPM/290 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PGAS 3/500 HV 50,000 RPM/200 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 3/70 HV 7,000 RPM/320 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 4/120 E-HV 12,000 RPM/440 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 4/190 HV 19,000 RPM/370 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 4/220 Z-HV 22,000 RPM/400 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 4/250 HV 25,000 RPM/0.59 HP
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 4/250 E-HV 25,000 RPM/440 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 4/300 HV 30,000 RPM/440 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 6/120 HV 12,000 RPM/650 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 6/160 V-HV 16,000 RPM/650 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 6/250 HV 25,000 RPM/650 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 6/50 VB-HV 5,000 RPM/650 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGAS 8/100 HV 10,000 RPM/0.8 HP
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PGAS 8/160 VM-HV 16,000 RPM/600 watts
The drive is equipped with a collet tool mounting for mounted tools.
air-powered straight grinder PGAS 8/220 HV 22,000 RPM/600 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGS 3/300 DV 30,000 RPM/240 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGS 3/300 Z-DV 30,000 RPM/290 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGS 4/220 Z-HV 22,000 RPM/400 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGS 6/120 HV 12,000 RPM/650 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGS 6/160 HV 16,000 RPM/650 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGS 6/250 HV 25,000 RPM/650 watts
The drive is equipped with a collet tool mounting for mounted tools.
Air-powered straight grinder PGTS 1/1100 DV 110,000 RPM/0.15 HP
Turbine motors perform consistently well in high rotational speed ranges. The compressed-air straight grinder with turbine motor has a collet tool mounting for mounted tools.
Air-powered filing machine PF 4/84 SV frequency: 8,400 strokes/min.
Filing machine for mechanical machining processes for filing, grinding and polishing with smooth running and high precision.
Air-powered filing machine PF 8/90 HV frequency: 9,000 strokes/min.
Filing machine for mechanical machining processes for filing, grinding and polishing with smooth running and high precision.
air-powered filing machine PFGA 07/220 frequency: 22,000 strokes/min.
Filing machine for mechanical machining processes for filing, grinding and polishing with smooth running and high precision.
Marking pen MST 32 DV Fine frequency: 32,000 strokes/min.
The marking pen with high stroke frequency is suitable for applying markings and labels.
Air-power motor PMA 10/120 HV 12,000 RPM/950 watts
The compressed-air motor has a DIN 10 connection.
Air-power motor PMA 10/160 HV 16,000 RPM/1,000 watts
The compressed-air motor has a DIN 10 connection.
Air-power motor PMA 10/200 HV 20,000 RPM/1,000 watts
The compressed-air motor has a DIN 10 connection.
Air-power motor PMA 4/120 HV 12,000 RPM/370 watts
The compressed-air motor has a DIN 10 connection.
Air-power motor PMA 4/220 HV 22,000 RPM/440 watts
The compressed-air motor has a DIN 10 connection.
Chisel damping ring diameter 12 mm x length 7 mm
Chisel damping ring for rebound, diameter 12 mm x length 7 mm. For damping impacts and protecting the machine.
sculptor's file rasp half-round 200mm file cut 2/rasp cut 2 general use for soft materials
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
Accessory for TORUS CUTTER, spare-parts set
With the service sets from PFERD TOOLS, the most common parts can be replaced in case of loss or damage. PFERD TOOLS offers both a repair set for hole saw arbors and service sets for the ALUMASTER High Speed Disc and the High Speed Torus Cutter.
Quick coupling BK 12 mm - 1/4"
Connecting fittings for robot spindles.
Quick coupling BK 14 mm - 1/2"
Connecting fittings for robot spindles.
Quick coupling BK 6 mm - 1/4"
Connecting fittings for robot spindles.
Quick coupling BK 8 mm - 1/4"
Connecting fittings for robot spindles.
Quick coupling BK 10 MM - 1/4"
Connecting fittings for robot spindles.
Quick coupling BK 4mm - 1-4"
Connecting fittings for robot spindles.
Needle file holder type 211 quick-mounting handle made of plastic 100 mm for needle file dia. 3-4.5 mm (10)
The PFERD TOOLS product range includes file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD TOOLS offers handles for a wide variety of files.
Netting hook and loop-backed abrasive disc set fine 15-piece dia. 150 A150,180,240 low dust with eccentric orbital sander
PFERD TOOLS offers a wide selection of coated abrasive tools for working on different workpiece geometries and materials. They consist of a base, a base bond and a coating bond for the abrasive grain to adhere to. Depending on the grit size, coated abrasive tools can achieve a high stock removal rate or a very fine surface finish.
netting aluminium oxide hook and loop-backed abrasive disc KSS NET dia. 125 A100 low-dust grinding with an eccentric orbital sander
NET Hook and loop-backed abrasive discs consist of a netting fabric to which the abrasive grit is stuck using a powerful binding technique, which makes it very robust.
universal aluminium oxide hook and loop-backed abrasive disc KSS dia. 125 A100 8 extraction holes for eccentric orbital sanders
For general grinding work from coarse to fine grinding in industry and professional trades.
Screw-on nozzle TGA 10 with male thread 1/4" steel version
Connecting fittings for air grinders.
Screw-on nozzle TGA 13 with male thread 3/8" steel version
Connecting fittings for air grinders.
Screw-on nozzle TGA 8 with male thread 1/4" steel version
Connecting fittings for air grinders.
HSS aluminium cutter dia. 20mm female thread M10 SP for aluminium/non-ferrous metals
General-purpose aluminium cutters, similar to the tree shape, with special cut and female thread M10.
HSS pilot drill dia. 6.35 mm L 60 mm for hole saw arbors LSS 1 and LSS 2
Pilot drills from PFERD TOOLS are used in combination with HSS hole saw arbors, quick-mounting systems for hole saws and hole cutters.
Bimetal hole saw Co8/M42 dia. 14 mm cutting depth 34 mm for steel, stainless steel, sheet metal, wood
Hole saws are made from tough, shatter-proof, sturdy HSS bimetal. The saw teeth are made from high-quality M42 (Co8) material. They are used for cutting out holes.
Bimetal hole saw Co8/M42 dia. 102 mm cutting depth 31 mm for steel, stainless steel, sheet metal, wood
Hole saws are made from tough, shatter-proof, sturdy HSS bimetal. The saw teeth are made from high-quality M42 (Co8) material. They are used for cutting out holes.
HSS hole saw set two-piece dia. 25 mm
Each set contains a hole saw made from tough, shatter-proof, sturdy HSS bimetal for cutting out holes and a suitable hole saw arbor with pilot drill for mounting the hole saw.
HSS rotary cutter set 81 10-piece cut 3 dia. 16/12/10/6mm shank dia. 6mm universal medium fine
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS finishing cutter set 84 15-piece special cut shank dia. 3 mm universal medium fine
Set 84 HSS contains 15 HSS finishing cutters for fine stock removal in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage. The tools are suitable for fine stock removal in small and hard-to-reach places.
HSS rotary cutter conical pointed shape G dia. 10x20 mm shank dia. 6 mm Z 1 universal coarse
Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter.
HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 1 universal coarse
Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter.
HSS rotary cutter bullet shape K dia. 12x25 mm shank dia. 6 mm Z 1 universal coarse
Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter.
HSS rotary cutter ball shape F dia. 08x07 mm shank dia. 6 mm Z 1 universal coarse
Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter.
HSS rotary cutter cylindrical shape end A-ST dia. 06x16 mm shank dia. 6 mm Z 1 universal coarse
Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter.
HSS rotary cutter conical pointed shape G dia. 10x20 mm shank dia. 6 mm Z 2 universal medium chip divider
Cut 2 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron, stainless steel (INOX), non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 13,200 RPM, depending on the burr diameter.
HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 2 universal medium chip divider
Cut 2 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron, stainless steel (INOX), non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 13,200 RPM, depending on the burr diameter.
HSS rotary cutter bullet shape K dia. 06x18 mm shank dia. 6 mm Z 2 universal medium chip divider
Cut 2 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron, stainless steel (INOX), non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 13,200 RPM, depending on the burr diameter.
HSS rotary cutter, ball shape F, 16 x 14 mm, shank diameter 6 mm, cut 2, universal medium chip breaker
HSS ball-shaped rotary cutter with cut 2 and a universal medium chip breaker for machining steel, cast steel, cast iron, stainless steel (INOX), non-ferrous metals and plastics. Suitable for use at lower speeds than tungsten carbide rotary cutters.
HSS rotary cutter cylindrical shape end A-ST dia. 06x16mm shank dia. 6mm Z 2 universal medium chip divider
Cut 2 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron, stainless steel (INOX), non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 13,200 RPM, depending on the burr diameter.
HSS rotary cutter flame-shaped B dia. 08x20 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter conical pointed shape G dia. 06x18 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter special shape dia. 12x18 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter oval shape O dia. 06x10 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter tree shape H dia. 08x20 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter conical shape with radius end L dia. 10x20 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter cylindrical shape with radius end C dia. 06x16 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter bullet shape K dia. 06x18 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter ball shape F dia. 04x03 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter cylindrical shape end A-ST dia. 04x13mm shank dia. 6mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS inverted cone end W-ST 12x13 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
HSS rotary cutter ALU oval shape O dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous
The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.
HSS rotary cutter ALU conical shape with radius end L dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous
The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.
HSS rotary cutter ALU cylindrical shape with radius end C dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous
The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.
HSS rotary cutter ALU pointed tree shape K dia. 16x30 mm shank dia. 6 mm aluminium/non-ferrous
The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.
HSS rotary cutter ALU cylindrical shape with end cut A-ST dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous
The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.
HSS flat countersink with guide pin DIN 373 dia. 10.0 mm shank dia. 8 mm fine for through hole
High-performance flat countersinks made from HSS according to DIN 373 for countersinking cylinder head and hexagon screws as well as nuts. Flat countersinks have a cylindrical design. The cylindrical pin in the relevant quality grades of fine, medium or tapping hole ensures coaxial alignment of the countersink to the bore.
HSS flat countersink with guide pin DIN 373 dia. 20.0 mm shank dia. 12 mm medium for through hole
High-performance flat countersinks made from HSS according to DIN 373 for countersinking cylinder head and hexagon screws as well as nuts. Flat countersinks have a cylindrical design. The cylindrical pin in the relevant quality grades of fine, medium or tapping hole ensures coaxial alignment of the countersink to the bore.
HSS flat countersink with guide pin DIN 373 dia. 11.0 mm shank dia. 8 mm for tapping hole
High-performance flat countersinks made from HSS according to DIN 373 for countersinking cylinder head and hexagon screws as well as nuts. Flat countersinks have a cylindrical design. The cylindrical pin in the relevant quality grades of fine, medium or tapping hole ensures coaxial alignment of the countersink to the bore.
HSS finishing cutter 906 dia. 6 mm shank dia. 3 mm SP universal fine
HSS rotary cutters specially designed for fine stock removal with a shank diameter of 3 mm, shank length of 30 mm and special cut.
HSS finishing cutter 941 dia. 1.6 mm shank dia. 3 mm SP universal fine
HSS rotary cutters specially designed for fine stock removal with a shank diameter of 3 mm, shank length of 30 mm and special cut.
HSS finishing cutter 961 dia. 8 mm shank dia. 3 mm SP universal medium fine
HSS rotary cutters specially designed for fine stock removal with a shank diameter of 3 mm, shank length of 30 mm and special cut.
Engraving cutter 301 HSS dia. 3 mm shank dia. 6 mm SP universal fine
HSS rotary cutters with special cut that are specifically designed for engraving. They are also suitable for fine stock removal in small and hard-to-reach places.
HSS conical and deburring countersink 60 ° dia. 10 mm shank dia. 6 mm DIN 334 C
Conical countersinks from PFERD TOOLS are characterized by their particularly sharp flutes that are able to achieve very good results, even at low cutting speeds.
HSS conical and deburring countersink 90 ° dia. 10 mm shank dia. 6 mm DIN 335 C
Conical countersinks from PFERD TOOLS are characterized by their particularly sharp flutes that are able to achieve very good results, even at low cutting speeds.
HSSE Co5 conical and deburring countersink 90 ° dia. 10 mm shank dia. 6 mm DIN 335 C
Conical countersinks from PFERD TOOLS are characterized by their particularly sharp flutes that are able to achieve very good results, even at low cutting speeds.
HSS conical and deburring countersink 90 ° dia. 10.4 mm shank dia. 6 mm DIN 335 C HICOAT coated
Conical countersinks from PFERD TOOLS are characterized by their particularly sharp right-hand flutes that are able to achieve very good results, even at low cutting speeds. In addition, conical countersinks with a HICOAT coating provide good high-temperature hardness and resistance to oxidation. They can therefore also be used on hard materials without the addition of coolants.
HSS countersink set 3-piece DIN 335 C 90°
The sets include high-performance countersink tools for countersinking countersunk screws for all common materials such as steel, cast steel and non-ferrous metals. The sturdy plastic box protects the tools against dirt and damage.
HSS countersink set 3-piece DIN 335 C 90° with HICOAT coating HC-FEP
The sets include high-performance countersink tools with a countersink angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Thanks to the HICOAT coating HC-FEP, they have high hardness and wear resistance. They are very temperature resistant and have a particularly long tool life. They can also be used in a higher cutting speed range and without coolants and lubricants. The sturdy plastic box protects the tools from dirt and damage.
HSS countersink set UGT 3-piece DIN 335 C 90° with unequal pitch
The sets include high-performance tools with a countersink angle of 90° for countersinking 90° screws for all common materials such as steel, cast steel and non-ferrous metals. Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. The sturdy plastic box protects the tools against dirt and damage.
Step drill HSS 9 drilling steps dia. 4-12 mm 3-surface shaft dia. 6 mm
HSS step drills for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft.
Step drill HSS 9 drilling steps dia. 4-12 mm 3-surface shaft dia. 6 mm HICOAT coated
HSS step drills for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft. HSS step drills with premium HICOAT coating HC-FEP are wear resistant and versatile as they can be used to process steel, stainless steel (INOX), non-ferrous metals, thermoplastics and duroplastics. Step drills with HICOAT coating HC-FEP provide good high-temperature hardness and resistance to oxidation. They can therefore also be used on hard materials without the addition of coolants.
step drill set HSS 3-piece
HSS step drills for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft.
step drill set HSS HC-FEP 3-piece
HSS step drills for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft. HSS step drills with premium HICOAT coating HC-FEP are wear resistant and versatile as they can be used to process steel, stainless steel (INOX), non-ferrous metals, thermoplastics and duroplastics. Step drills with HICOAT coating HC-FEP provide good high-temperature hardness and resistance to oxidation. They can therefore also be used on hard materials without the addition of coolants.
HSS edge trimming cutter 08x30 mm shank dia. 6 mm Z SP for edge breaking
Due to their 3 identical cutting areas, this HSS edge trimming cutter provides three milling areas. Cylindrical rotary cutter with triple, concave contour and special cut, with a shank diameter of 6 mm. Suitable for edge breaking to a defined radius.
Spiral drill INOX dia 1.5mm HSS-E Co5 N DIN 1897 135° extra-short version for robot and machine applications for tough and hard materials
Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD TOOLS offers spiral drills in the STEEL (118 ° point angle) and INOX (135 ° point angle) versions.
Spiral drill STEEL dia. 1.5 mm HSS-G N DIN 1897 118° extra-short version for robot and machine applications universal
Drilling tools with cross grinding for industrial uses. Fully ground, right-hand turning versions that produce precise drill holes thanks to their high concentricity and exact centring. PFERD TOOLS offers spiral drills in the STEEL (118 ° point angle) and INOX (135 ° point angle) versions.
HSSE countersink set 3-piece DIN 335 C 90° version Co5
The sets include high-performance countersink tools with a countersink angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Long tool life and temperature-resistant version due to Co content. The sturdy plastic box protects the tools from dirt and damage.
HSSE countersink set UGT 3-piece DIN 335 C 90° version Co5 with unequal pitch
The sets include high-performance tools with a countersink angle of 90° for countersinking 90° screws for particularly tough and hard materials such as alloyed and high-strength steel and stainless steel (INOX). Conical countersinks with unequal pitch (UGT) are characterized by a specially developed geometry with wide flutes, which enables optimal chip removal and heat dissipation, smooth running and optimum results. Long tool life and temperature-resistant version due to Co content. The sturdy plastic box protects the tools against dirt and damage.
Step drill HSSE Co5 9 drilling steps dia. 4-12 mm 3-surface shaft dia. 6 mm
HSSE step drill for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft.
Step drill set HSSE Co5 3-piece
HSSE step drill for drilling and deburring thin sheets, pipes and profiles made from various materials. To ensure reliable torque transmission, all step drills have a three-surface shaft.
Spiral drill set 10-piece INOX HSSE N DIN 338 for tough and hard materials
The set contains 10 HSS spiral drills in the INOX in HSSE-Co5 (M35) type for industrial uses. The sturdy plastic box protects the tools against dirt and damage.
Spiral drill set 10-piece STEEL HSSG N DIN 338 universal
The set contains 10 HSS spiral drills in the STEEL in HSSG (M2) type for industrial uses. The sturdy plastic box protects the tools against dirt and damage.
In-line fine filter SF30 STG-IG 1/2
Connecting fittings for air grinders.
clamping flange set SFS 76 5/8 for greater lateral stability with thin cut-off wheels 180/230mm
Clamping flange set for increasing lateral stability and precise guidance in order to prevent wobbling, especially when using cut-off wheels from 1.6 to 2.0 mm in width with diameters of 180 and 230 mm.
INOX mounted point set 5-piece shank dia. 6 mm A30/46/60 for stainless steel
The set contains five INOX-type grinding points with 6 mm shank diameter in the most common shapes and dimensions for the most common applications.
Diamond cut-off wheel DS 115x2.8x22.23 mm vacuum-brazed for fast cutting of all kinds of materials
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DS 115x2.2x22.23 mm PSF for fast cutting of stone and concrete
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DS 115x2.4x22.23 mm SG for fast cutting of stone and concrete
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DS 115x2.2x22.23 mm SGP for fast cutting of stone and concrete
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DS 100x1.6x16/20 mm START for fast cutting of stone and concrete
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DG FL 100x1.6x16/20 mm PSF for cutting tiles, high cutting quality
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DG FL 115x1.4x22.23 mm SG for cutting tiles, high cutting quality
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DG 115x2.1x22.23 mm PSF for cutting stone/concrete, high cutting quality
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DG 115x2.2x22.23 mm SG for cutting stone/concrete, high cutting quality
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
Diamond cut-off wheel DG 100x1.9x16/20 mm START for cutting stone/concrete, high cutting quality
PFERD TOOLS diamond cut-off wheels are manufactured in compliance with the highest quality and safety standards. They guarantee optimum cutting results and allow efficient processing of different materials, e.g. concrete, exposed aggregate concrete, clinker brick, hard stone, granite and other abrasive building materials. The product range offers the best tool for any application.
SIC abrasive cord AC dia. 0.4 mm x 15 m SIC200 for tool and mould-making
High flexibility, therefore ideal for very fine deburring and finishing work in hard-to-reach places.
Paper-backed abrasive sheet aluminium oxide 230x280 mm BP A100 general for wood, paint and lacquer
The abrasive material aluminium oxide A is the low-cost alternative for normal workloads when working on painted wooden and metal surfaces.
Universal paper-backed abrasive sheet aluminium oxide 230x280 mm BP ECO AC A100 with non-stick coating
The stearate coating is a non-stick coating (AC) that prevents the abrasive sheets from clogging. The ECO AC version with aluminium oxide A is a low-cost alternative for general grinding work in industry and professional trades.
Waterproof paper-backed abrasive sheet 230x280 mm BP-W ECO PAINT SiC100 for working on paint
The ECO W version with silicon carbide (SiC) is a low-cost alternative for use on paint and glass. Particularly suitable for all wet grinding work on conventional painted constructions.
End brush with plastic protection knotted PBG dia. 19 mm shank dia. 6 mm stainless steel wire dia. 0.15
Aggressive brush. Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter.
SINGLETWIST INOX-TOTAL end brush knotted PBGSIT dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.20
Particularly flexible single-knot brush for special applications.
SINGLETWIST end brush knotted PBGS dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.20 (10)
Particularly flexible single-knot brush for special applications.
pointed end brush crimped PBUS dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.30
Suitable for light brushing such as deburring, cleaning and derusting. Tapered tip for superb accuracy.
End brush with bridle crimped PBUR dia. 13 mm shank dia. 6 mm stainless steel wire dia. 0.20
Suitable for light brushing such as deburring, cleaning and derusting.
INOX-TOTAL end brush crimped PBUIT dia. 15 mm shank dia. 6 mm stainless steel wire dia. 0.15
Suitable for light brushing such as deburring, cleaning, and removal of heat discolouration.
COMPOSITE end brush PBUPR dia. 25 mm shank dia. 6 mm ceramic filament dia. 1.00 mm grit 120 stationary
Particularly suitable for deburring and work on surfaces on stationary machines.
Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm aluminium oxide filament dia. 0.50 mm grit 320
Suitable for light brushing such as deburring, cleaning and polishing.
End brush crimped PBU dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.15
Suitable for light brushing such as deburring, cleaning and derusting.
encapsulated end brush crimped PBV dia. 22 mm shank dia. 6 mm steel wire dia. 0.25
Particularly aggressive brushing effect for heavy-duty brushing.
long end brush crimped PBUL dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.20
Suitable for light brushing such as deburring, cleaning and derusting. Particularly long version to access deep areas.
riffler file holder RFH 150 for riffler file length 150mm
PFERD TOOLS offers holders for a range of files and file blades. The PFERD TOOLS product range includes riffler file holders, adjustable holders for car body files and holders for file blades, tungsten carbide files and hand deburrers.
Abrasive segment 235x42x4 mm A46 for work on sand moulds in foundries
Wedge-shaped abrasive segments for work on sand moulds and cores in foundries.
Inflatable grinding drum dia. 90x100 mm with 19 mm keyway for drum grinder
The pneumatic grinding drum is suitable for short belts with a width of 100 mm and a length of 282 mm. The rubber tube yields with increased contact pressure, which is why the abrasive belt adapts very well to the surface to be machined and the contact area increases.
3-piece drum grinder UWER 15/40 230 V in a set with flap drums dia. 100x100 and accessories
Set with high-output electric grinding drum drive and products from PFERD TOOLS for cleaning, brush matting and very fine grinding of large surfaces on stainless steel (INOX) components.
Flap drum dia. 100x100 keyway 19 mm A120 for general use on drum grinders
Suitable for general work on medium-sized and large metal surfaces, e.g. fine grinding work on large radii in container, kitchen and apparatus construction, and achieving uniform finishes (grinding patterns) on large surfaces and contours in manual applications. Suitable for all conventional keyway systems.
car body file blade milled hand 300mm cut 1-radial, coarse stock removal
Car body file blades can be tensioned individually in the car body file holder and can be adapted to match the surface contour of the workpiece.
Car body file, tanged, curved and convex hand 350 mm cut 1 for coarse stock removal
File curved in longitudinal and transverse direction (convex), tanged. Cut on one side.
Car body file holder type KFH for file blade 300 mm ergonomic and continuously adjustable
PFERD TOOLS offers holders for a range of files and file blades. The PFERD TOOLS product range includes riffler file holders, adjustable holders for car body files and holders for file blades, tungsten carbide files and hand deburrers.
Tungsten carbide file flat 132 mm 6.5 teeth/cm, for steel, steel materials >54 HRC
Flat tungsten carbide files for working on flat and convex surfaces.
precision needle file square 140mm Swiss cut 0, coarse
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
Overlap slotted disc KS dia. 30x5 mm thread 1/8 BSW A 80 for grinding narrow slots
Special tool for side grinding in grooves, fillets and slots. They are mounted via a central threaded hub.
Belt grinder attachment arm BSVA 12/19 x 520 belt length: 520 mm x Width: 12-16 mm
The belt grinder attachment can be pivoted on the respective drive system or handpiece and therefore allows flexible adaptation to each individual work situation.
Belt grinder attachment arm BSVAK 4/16X305 belt length: 305 mmxWidth: 3-9 mm
The belt grinder attachment can be pivoted on the respective drive system or handpiece and therefore allows flexible adaptation to each individual work situation.
Electric belt grinder EBER 8/280 230 volts belt length: 520 mm x width: 3-20 mm
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Hard felt flap disc FFS dia. 115 mm hole 22.23 for polishing work with an angle grinder
Felt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components.
electric edge mill EDGE FINISH UWER 18/110 EF 230 volts 11,000-2,750 RPM/1,750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
electric edge mill EDGE FINISH UWER 18/110 EF-30 TK 230 volts 11,000-2,750 RPM/1,750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
electric edge mill EDGE FINISH UWER 18/110 EF-R3/45 TK 230 volts 11,000-2,750 RPM/1,750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Aluminium oxide grinding disc self-adhesive PSA dia. 12 mm A120 for tool and mould-making
The flexible system, comprising self-adhesive abrasive discs and holder, can also be used on contours. The holder allows self-adhesive abrasive discs to be used with commercially available speed-adjustable or slow-running angle grinders.
Mounting bolts for TORUS CUTTER
In conjunction with innovative tool systems from PFERD TOOLS, the specially developed cutting inserts are characterized by a long tool life and optimal stock removal rate.
Accessory for ALUMASTER RS TC cutting inserts dia. 10 mm HICOAT coated
In conjunction with innovative tool systems from PFERD TOOLS, the specially developed cutting inserts are characterized by a long tool life and optimal stock removal rate.
Guard for cutting work dia. 115 mm H45-125 FL-SV
PFERD TOOLS offers various guards for safe cutting (HT) and grinding (FL).
Guard for cutting work dia. 125 mm H45-125 FL-SV
PFERD TOOLS offers various guards for safe cutting (HT) and grinding (FL).
Chisel holding spring internal diameter: 28 mm for wide chisel
Chisel holding spring for wide chisel with 28 mm internal diameter.
Chisel holding spring internal diameter: 28 mm
Standard chisel holding spring with 28 mm internal diameter.
Chisel holding spring internal diameter: 31 mm round
Round chisel holding spring with 31 mm internal diameter.
Cut-off wheel EH 115x1.6x22.23 mm depressed centre CERAMIC Special Line SGP STEEL for steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
Cut-off wheel EH 115x2.4x22.23 mm depressed centre Uni. Line PSF ALU+STONE for aluminium/non-ferrous metals/stone
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
Cut-off wheel EHT 115x1.0x22.23 mm flat Universal Line PSF CLASSIC STEELOX for steel/VA
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
DUODISC cut-off/grind. E 100x1.9x16 mm depressed-centre Uni. Line PSF DUO STEELOX f. steel/stainless steel
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
Cut-off wheel EH 100x2.4x16 mm depressed centre Universal Line PSF STEEL for steel
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
Cut-off wheel EH 100x2.4x16 mm depressed centre Universal Line PSF STEELOX for steel/stainless steel
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
Cut-off wheel EH 115x2.4x22.23 mm depressed centre Performance Line SG ALU for aluminium
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Cut-off wheel EH 230x3.2x22.23 mm depressed centre Performance Line SG CAST+ALU for cast material/aluminium
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Cut-off wheel EH 230x2.9x22.23 mm depressed centre Performance Line SG CAST+INOX for cast material/stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Cut-off wheel EHT 125x1.0x22.23 mm flat Performance Line SG CLASSIC STEELOX for steel/VA
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Cut-off wheel EH 125x2.4x22.23 mm depressed centre Performance Line SG INOX for stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Cut-off wheel EH 100x2.4x16 mm depressed centre Performance Line SG STEEL for steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Cut-off wheel EH 115x2.4x22.23 mm depressed centre Performance Line SG STEELOX for steel/stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Cut-off wheel EHT 105x0.8x16 mm flat Special Line SGP STEELOX for steel/stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
Cut-off wheel EH 230x3.2x22.23 mm depressed centre ZIRKON Performance Line SG CAST for cast material
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Casing SCH 10 DIN 15/G28
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 10 DIN10/G28
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 10 DIN10/G28 2M
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 12 DIN10/G28
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 12 DIN15/G28
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 4 DIN10/G16
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 4 PST-T DIN 10/M4 1.5 m
These special flexible shafts do not have a handpiece for tool mounting and are particularly flexible in the front section. The POLISTAR-TUBE grinding tools are attached directly to the core of the flexible shaft with screws (INOX type). POLINOX cross buffs PNST are screwed on with adapter AD M4 or AD M5 (accessories). This combination is highly suitable for gradual fine grinding and cleaning of inner surfaces of pipes and pipe bends. Both pipe bend ends can be deburred from the entry side.
Casing SCH 6 DIN10/G16
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 7 DIN10/G22
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 7 DIN10/G22 2M
Flexible shafts consist of three components which can be combined in different ways: the flexible core (SE), the flexible casing (SCH), the handpiece (HA).
Casing SCH 7 PST-T DIN 10/M5 2 m
These special flexible shafts do not have a handpiece for tool mounting and are particularly flexible in the front section. The POLISTAR-TUBE grinding tools are attached directly to the core of the flexible shaft with screws (INOX type). POLINOX cross buffs PNST are screwed on with adapter AD M4 or AD M5 (accessories). This combination is highly suitable for gradual fine grinding and cleaning of inner surfaces of pipes and pipe bends. Both pipe bend ends can be deburred from the entry side.
ceramic oxide grain abrasive belt BA 10x330mm CO-COOL120 for grinding stainless steel with a belt grinder (100)
For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
Non-woven abrasive belt VB 100x282 mm A100 G for fine grinding and finishing for drum dia. 90x100 mm
Suitable for general work on surfaces such as metal tubular structures, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.
Polishing belt P-BA 100x282 mm for polishing work for drum dia. 90x100 mm with drum grinder
Suitable for polishing with polishing paste bars and grinding pastes on tubular constructions and railings.
oil mist device ONG-A 1/2
Connecting fittings for air grinders.
oil mist device ONG-A 1/4
Connecting fittings for air grinders.
COMPOSITE composite disc brush DBUR dia. 75 mm M14 SiC filament dia. 1.14 mm grit 80 stationary
Particularly aggressive brush with bridle. Particularly suitable for deburring and work on surfaces on stationary machines.
COMPOSITE composite disc brush DBUR dia. 100x22.2 mm hole ceramic filament dia. 1.10 mm grit 120 stationary
Particularly aggressive brush with bridle. Particularly suitable for deburring and work on surfaces on stationary machines.
COMPOSITE composite disc brush DBUR dia. 50 mm shank dia. 6 mm ceramic filament dia. 1.10 mm grit 120 stationary
Particularly aggressive brush with bridle. Particularly suitable for deburring and work on surfaces on stationary machines.
COMPOSITE FLEX composite disc brush DBU dia. 100x22.2 mm hole SiC filament dia. 1.14 mm grit 80 stationary
Particularly flexible brush. Particularly suitable for deburring and work on surfaces on stationary machines.
conical diamond file 10x170mm D126 (medium) for particularly narrow, deep-set contours
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
conical diamond file 4x170mm D126 (medium) for particularly narrow, deep-set contours
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
conical diamond file 6x170mm D126 (medium) for particularly narrow, deep-set contours
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
conical diamond file 8x170mm D126 (medium) for particularly narrow, deep-set contours
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
COMBITWIST bevel brush knotted KBG dia. 100x13 mm M14 steel wire dia. 0.50 mm angle grinders
Very aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter.
Bevel brush knotted KBG dia. 100x13 mm M14 steel wire dia. 0.50 mm angle grinders
Aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter.
INOX-TOTAL bevel brush crimped KBUIT dia. 50x10 mm shank dia. 6 mm stainless steel wire dia. 0.20
Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration.
Bevel brush crimped KBU dia. 50x10 mm shank dia. 6 mm stainless steel wire dia. 0.20
Excellent for medium-duty brushing such as deburring, cleaning and derusting.
Bevel brush crimped KBU dia. 100x10 mm M14 stainless steel wire dia. 0.35 mm angle grinders
Excellent for medium-duty brushing such as deburring, cleaning and derusting.
Bevel brush crimped KBU dia. 100x10 mm M14 stainless steel cord wire dia. 0.25 mm angle grinders
Excellent for medium-duty brushing such as deburring, cleaning and derusting.
tungsten point file hand thin 100mm cut 2 for contacts, narrow grooves, cut-outs
Tungsten point files are used to prepare or clean electrical contacts for use, and are well-suited to work on narrow grooves and cut-outs.
Guard H51-150 FL-SV
PFERD TOOLS offers various guards for safe cutting (HT) and grinding (FL).
Guard H51-150 HT-SV
PFERD TOOLS offers various guards for safe cutting (HT) and grinding (FL).
Protective cover SDVH
Protective cover for belt grinder attachment holder.
Clamping bolt for small cut-off wheels with hole 10 mm shank dia. 6.35 mm
Accessory for mounting small cut-off wheels on straight grinders. Sturdy version with maximum shank breakage resistance.
Dry diamond drill bit DPD FL dia. 10 mm hexagon shank for tiles (power drill)
Vacuum-brazed dry diamond drill bits for power drills are ideal for drilling holes into tiles and glazed tiles. The wax filling provides a self-cooling effect.
Laboratory cut-off wheel T 150x1.0x22.23 mm Performance Line SG LAB HD STEELOX for steel/stainless steel
The PFERD TOOLS product range offers laboratory cut-off wheels (LAB) in different versions and dimensions. Laboratory cut-off wheels are used to produce precision cuts and for fast cutting of laboratory samples.
Laboratory cut-off wheel T 250x2x32 mm Performance Line SG LAB STEEL for steel
The PFERD TOOLS product range offers laboratory cut-off wheels (LAB) in different versions and dimensions. Laboratory cut-off wheels are used to produce precision cuts and for fast cutting of laboratory samples.
precision needle file hand 140mm Swiss cut 0, coarse
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
Diamond file for manual filing tool flat conical 3.3x1.0x55 mm shank dia. 3 mm D126 (medium) complete
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond file for manual filing tool square 1.5x1.5x50 mm shank dia. 3 mm D126 (medium) complete
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond file for manual filing tool hand 3.0x1.0x50 mm shank dia. 3 mm D126 (medium) both sides
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond file for manual filing tool crossing oval 3.5x2.0x50 mm shank dia. 3 mm D126 (medium) complete
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond file for manual filing tool three square 2.0x2.0x50 mm shank dia. 3 mm D126 (medium) complete
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Diamond file for manual filing tool round dia. 1.0x50 mm shank dia. 3 mm D126 (medium) complete
Diamond files and sheets are used for tasks where conventional files fail due to the hardness of the material being worked on.
Table stand TS L 1400
Matching accessories for RUER flexible shaft drive.
Reducing ring set 32/25.4/19.05/15.875/12.7
Reducing rings enable secure adjustment of the standard centre hole to a reduced centre hole dimension.
Grinding wheel dresser dia. 22 mm length 250 mm for profiling and dressing
The SiC grinding wheel dresser is an affordable alternative for dressing bench grinding wheels. A stainless steel tube protects the SiC rod against breakage and makes the tool more robust.
Bench grinding wheel dia. 250x25 mm centre hole dia. 51 mm SiC120 for hard materials e.g. tungsten carbide
PFERD TOOLS bench grinding wheels have been adapted to the standard bench grinders on the market.
Bench grinding wheel dia. 125x20 mm centre hole dia. 32 mm A80 for sharpening HSS pilot drills
PFERD TOOLS bench grinding wheels have been adapted to the standard bench grinders on the market.
Grinding wheel dresser dia. 12x39 mm length 435 mm for profiling and dressing
Ideal accessory for PFERD TOOLS bench grinding wheels if the grinding disc has become clogged or the shape of the grinding disc has changed.
Bench grinding wheel dia. 250x40 mm centre hole dia. 51 mm A60 for general grinding work
PFERD TOOLS bench grinding wheels have been adapted to the standard bench grinders on the market.
masking tape ADB width 20mm length 25m hook and loop to protect surfaces
The self-adhesive masking tape is used to preserve the clear separation between different grinding patterns in adjacent areas. The masking tape protects surfaces which have already been worked on, or which are not supposed to be worked on.
staircase maker's file rasp half-round 250mm file cut 2/rasp cut 2 for numerous materials
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
staircase maker's rasp half-round curved 250mm rasp cut 2 for numerous materials
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
Small cut-off wheel EHT 30x1.0x6 mm flat Performance Line SG STEELOX for steel/stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
control device MIM STG2S 3/600 230 volts 60,000-1,000 RPM/260 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
control device MIM STG3S 3/800 230V 80,000-1,000 RPM/350 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Foot switch MIM FU-E/A
Micro motor foot switch for turning on and off.
extension cable MIM VLK HAS/WZS 3 metres
Micro motor extension cable for handpiece, 3 m version.
Vario foot switch MIM FU-R
Vario micro motor foot switch for stepless rotational speed control.
Handpiece MIM HAS 2/600 SP3 60,000-1,000 RPM/150 watts
Straight micro motor handpiece suitable for micro motor control devices MIM STG 3/600 and MIM STG 3/800.
angle handpiece MIM WZS 3/300 45° S3 30,000-1,000 RPM/260 watts
Angle handpiece suitable for micro motor control devices MIM STG 3/600 and MIM STG 3/800.
double open-ended spanner DM SW 10/10mm
PFERD TOOLS offers different single-head spanners (EM) and double open-ended spanners (DM) with different widths across flats (SW).
Double open-ended spanner DM SW 4/4 mm
PFERD TOOLS offers different single-head spanners (EM) and double open-ended spanners (DM) with different widths across flats (SW).
lock sleeve MIM ARH
Lock sleeve for micro motor system.
Double pin spanner MIM-DSTS SW 11x2.4 mm
Double pin spanner with pin spacing of 11 mm and diameter of 2.4 mm.
collet key MIM SPS DK D7
Three square collet key with diameter of 7 mm.
lock spanner MIM ARS HA D23.5
Lock spanner with diameter of 23.5 mm.
mill saw file straight edges hand 200mm cut 2 general for sharpening
Mill saw files are versatile tools for sharpening cutting edges on saw blades, knives and other tools with sharp metallic edges.
mill saw file straight edges flat 150mm cut 1 for coarse sharpening
Mill saw files are versatile tools for sharpening cutting edges on saw blades, knives and other tools with sharp metallic edges.
extension for drive spindles SPV 100-1/4 S3/8 Max. RPM 20,000 incl. 1/4" collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
extension for drive spindles SPV 100-1/4 SPG6 Max. RPM 20,000 incl. 1/4" collet"
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 100-6 S8 Max. RPM 20,000 with 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 100-6 SPG 6 Max. RPM 20,000 with 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
extension for drive spindles SPV 150-1/4 S3/8 Max. RPM 10,000 incl. 1/4" collet"
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
extension for drive spindles SPV 150-1/8 S1/4 Max. RPM 10,000 incl. 1/8" collet"
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 150-3 S6 Max. RPM 10,000 with 3 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 150-6 S8 Max. RPM 10,000 with 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 150-8 S8 Max. RPM 10,000 with 8 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 36-6 S6 Max. RPM 20,000 with 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
extension for drive spindles SPV 50-1/8 S1/4 Max. RPM 44,000 incl. 1/8" collet"
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 50-3 S6 Max. RPM 44,000 with 3 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 50-3 S8 Max. RPM 44,000 with 3 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 50-6 S8 Max. RPM 20,000 with 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
extension for drive spindles SPV 75-1/4 S3/8 Max. RPM 20,000 incl. 1/4" collet"
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
extension for drive spindles SPV 75-1/4 SPG6 Max. RPM 20,000 incl. 1/4" collet"
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 75-6 S8 Max. RPM 20,000 with 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPV 75-6 SPG 6 Max. RPM 20,000 with 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. Drive spindle extensions are a cost-effective alternative to special made-to-order burrs and mounted points with long shanks.
Extension for drive spindles SPVH13 length 1000 mm 6 S6 Max.RPM25,000 incl.6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH13 length 1000 mm 6 S8 Max.RPM25,000 incl.6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH13 length 300 mm 6 S6 Max.RPM25,000 incl. 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH13 length 300 mm 6 S8 Max.RPM25,000 incl. 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH13 length 500 mm 6 S6 Max.RPM25,000 incl. 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH13 length 500 mm 6 S8 Max.RPM25,000 incl. 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH13 length 800 mm 6 S6 Max.RPM25,000 incl. 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH13 length 800 mm 6 S8 Max.RPM25,000 incl. 6 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
extension for drive spindles SPV 100-1/4 S3/8 Max. RPM 25,000 incl. 1/4" collet"
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH9 length 300 mm 3 S6 Max.RPM 25,000 incl. 3 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH9 length 500 mm 3 S6 Max.RPM 25,000 incl. 3 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension for drive spindles SPVH9 length 800 mm 3 S6 Max.RPM 25,000 incl. 3 mm collet
With drive spindle extensions, shanks of grinding and milling tools can be extended. They allow access to difficult-to-reach areas and particularly deep cores. They are clamped into the collet of the machine (air or electric grinder) or into the flexible shaft handpiece. They must also be guided by hand.
Extension spindle SPV20 CD 1/4-20 UNC
Extensions for drive spindles with COMBIDISC abrasive disc holder without threaded shank.
hoof rasp hand 350mm rasp cut 1/file cut 1 for working on hooves
PFERD TOOLS hoof rasps are popular with all users whose occupation involves hoof care and working with horn.
File for aluminium hand 250 mm cut 0 for working on soft metal and plastic
PFERD TOOLS special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools.
File for aluminium half-round 250 mm cut 0 for working on soft metal and plastic
PFERD TOOLS special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools.
Deburring files hand 150 mm special cut for soft non-ferrous metals and plastics
PFERD TOOLS special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools.
file rasp with handle hand 200mm cross cut 1/rasp cut 1 for general use
PFERD TOOLS special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools.
hobby file with handle hand 200mm cross cut 1/single cut 2 for general use
PFERD TOOLS special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools.
fitter's file with handle hand 250mm cut radial 1/straight 2, general
PFERD TOOLS special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools.
lathe file hand 250mm cut 1 for coarse stock removal, roughing
PFERD TOOLS special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools.
universal sharpening file with handle hand 200mm cross cut 1/single cut 2
PFERD TOOLS special files are tools that are optimized for specific uses, e.g. for processing soft metals or thermosetting plastics, for deburring parts turned on a lathe or for sharpening cutting tools.
Needle rasp set 6-piece in plastic pouch 140mm Swiss cut 2, for wood, plastic
Cross cut for medium-fine precision work.
needle rasp flat 140mm Swiss cut 2, for wood, plastic
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
needle rasp square 140mm Swiss cut 2, for wood, plastic
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
Needle rasp hand 140 mm Swiss cut 2, for wood, plastic
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
needle rasp three square 140mm Swiss cut 2, for wood, plastic
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
needle rasp half-round 140mm Swiss cut 2, for wood, plastic
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
needle rasp round 140mm Swiss cut 2, for wood, plastic
Special rasps from PFERD TOOLS are used by numerous professionals in many industries for different applications. They are used for the processing of carved woodwork, plastics, relief ornaments, casting patterns and areas which are hard to reach.
ONG oil 1 litre
The special lubricating oil is suitable for the oil mist lubrication of air-powered devices. It also protects against icing up.
Electric motor EMER 8/280 230 volts 28,000 RPM/750 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
Electric motor EMER 8/90 230 volts 9,000 RPM/710 watts
Electric grinders are general all-rounders. They offer a high power output in relation to their size and weight. They are particularly suitable for use with grinding tools that require a constant rotational speed. Electric grinders can be used for nearly every application. They are used in many industries in different processes. The stepless electronic rotational speed control allows the use of various types of tools on one single tool drive.
precision needle file crossing oval 140mm Swiss cut 1, medium
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
Tungsten carbide high-performance burr oval TRE dia. 12x20 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr oval TRE dia. 03x07 mm shank dia. 3 mm Z3 HICOAT coated universal medium
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Electric burnishing machine ESER 12/25 230 volts 2,500 RPM/1,200 watts
The low-speed burnishing machine with spindle lock pin has high torque and stepless rotational speed regulation. It has two keyways for increased power transmission on drum tools, a drive spindle with CD-R mounting and an M14 drive spindle for mounting drum tools with female thread.
Electric burnishing machine ESER 17/75 230 volts 7,500 RPM/1,700 watts
The burnishing machine with spindle lock pin comes with stepless rotational speed regulation. It has two keyways for increased power transmission on drum tools, a drive spindle with CD-R mounting and an M14 drive spindle for mounting drum tools with female thread.
diamond polishing paste DPP grit size 1µ ultra-fine syringe containing 20g for hard material
Diamond polishing pastes guarantee quick and efficient work, particularly in tool-making and mould-making.
Collet key SPS VK 4 mm
Collet key (SPS) with 4 mm square.
Collet SPZ GR.1 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.1 2,34 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.1 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.1 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.10 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.10 5 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.10 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet VF-SPZ GR.10 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet VF-SPZ GR.10 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.11 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.11 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.11 2,34 mm - 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.11 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.11 5 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.11 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.11 8 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.12 10 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.12 12 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.12 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.12 3/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.12 5 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.12 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.12 8 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.13 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.13 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.13 2,34 mm - 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.13 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.13 5 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.13 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.14 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.14 2,34 mm - 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.14 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.15 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.15 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.15 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.16 10 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.16 12 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.16 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.16 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.16 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.16 8 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.17 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.17 2,35 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.17 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.18 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.18 2,35 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.18 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.19 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.19 2,35 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.19 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.2 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
collet group 2 SPZ 947.016.04 (2.34 mm)
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.2 2,34 mm - 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
collet group 2 SPZ 947.016.01 (3 mm)
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.20 10 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.20 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.20 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.20 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.20 8 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.21 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.21 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.21 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.21 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.22 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.22 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.22 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.22 8 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.23 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.23 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.23 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.3 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.3 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.4 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.4 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.4 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.4 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.5 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.5 3 mm - 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.5 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.6 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.6 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.6 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.6 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.6 5 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.6 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.6 8 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.7 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.7 3 mm - 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.7 3/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.7 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.7 8 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.8 10 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.8 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.8 3/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.8 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.8 8 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.9 1/4″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.9 1/8″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.9 2,34 mm - 3/32″
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.9 3 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.9 5 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Collet SPZ GR.9 6 mm
Depending on the selected product from PFERD TOOLS, different collets are available. Matching collets are allocated to every drive.
Solid carbide end mill dia. 6 mm, 5 flutes, with chip divider, 2xDC, radius 0.5 mm, AlTiN/TiSiXN coating, HB shank, Performance Stainless
By combining a material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid tungsten carbide end mills are ideally suited to machining stainless steel and titanium alloys.
Solid carbide end mill dia. 6 mm, 5 flutes, with chip divider, 3xDC, radius 0.5 mm, AlTiN/TiSiXN coating, HB shank, Performance Stainless
By combining a material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid tungsten carbide end mills are ideally suited to machining stainless steel and titanium alloys.
Solid carbide end mill dia. 6 mm, 5 flutes, with chip divider, 4xDC, radius 0.5 mm, AlTiN/TiSiXN coating, HB shank, Performance Stainless
By combining a material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid tungsten carbide end mills are ideally suited to machining stainless steel and titanium alloys.
Solid carbide end mill dia. 6 mm, 5 flutes, with chip divider, 5xDC, radius 0.5 mm, AlTiN/TiSiXN coating, HB shank, Performance Stainless
By combining a material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid tungsten carbide end mills are ideally suited to machining stainless steel and titanium alloys.
Solid carbide end mill dia. 1 mm, 4 flutes, 2xDC, chamfer 0.05 mm 45°, TiAlSiN coating, HA shank, Performance Stainless
By combining a material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid tungsten carbide end mills are ideally suited to machining stainless steel and titanium alloys.
Solid carbide end mill dia. 6 mm, 4 flutes, 2xDC, radius 0.5 mm, AlTiN / TiSiXN coating, HA shank, Performance Stainless
By combining a material-specific tool geometry and state-of-the-art coatings, the Performance Stainless solid tungsten carbide end mills are ideally suited to machining stainless steel and titanium alloys.
Robotics solid tungsten carbide end mill dia. 6 mm, 2 cutting edges, 2xD, radius 0.4 mm, DLC coating, shank HA, Performance Aluminium
Thanks to their material-specific tool geometry, Performance Aluminium solid carbide end mills are ideally suited to machining aluminium alloys, non-ferrous metals and plastics.
Robotics solid tungsten carbide end mill dia. 4.5 mm, 5° conical, 2 cutting edges, 0.3 mm chamfer, DLC coating, shank HA, Performance Alu.
Thanks to their material-specific tool geometry, Performance Aluminium solid carbide end mills are ideally suited to machining aluminium alloys, non-ferrous metals and plastics.
Robotics solid tungsten carbide end mill router dia. 8 mm, 10 cutting edges, 3xD, sharp, diamond coating, shank HA, Performance Other mat.
By combining a material-specific tool geometry and state-of-the-art coatings, the Performance Other materials solid tungsten carbide end mills are ideally suited to machining plastics.
precision riffler file set type 720 P 190mm Swiss cut 0, coarse
Contains an application-oriented selection of riffler rasps.
precision riffler file type 410 P 300mm Swiss cut 0, coarse
Cross cut for coarse precision work.
precision riffler rasp type 701 P 190mm Swiss cut 0, coarse
Suitable for coarse rasp work.
Precision handy file set 5-piece in plastic pouch 215 mm Swiss cut 00, very coarse
Precision files similar to needle files. Suitable for work on the smallest areas of metals and plastics that are hard to reach, e.g. in tool and mould-making for refining pressing, forging and casting tools.
Precision handy file square 215 mm Swiss cut 00, very coarse
Precision files similar to needle files. Suitable for work on the smallest areas of metals and plastics that are hard to reach, e.g. in tool and mould-making for refining pressing, forging and casting tools.
Precision handy file hand 215 mm Swiss cut 00, very coarse
Precision files similar to needle files. Suitable for work on the smallest areas of metals and plastics that are hard to reach, e.g. in tool and mould-making for refining pressing, forging and casting tools.
Precision handy file three square 215 mm Swiss cut 00, very coarse
Precision files similar to needle files. Suitable for work on the smallest areas of metals and plastics that are hard to reach, e.g. in tool and mould-making for refining pressing, forging and casting tools.
Precision handy file half-round 215 mm Swiss cut 00, very coarse
Precision files similar to needle files. Suitable for work on the smallest areas of metals and plastics that are hard to reach, e.g. in tool and mould-making for refining pressing, forging and casting tools.
precision tang file barrette 150mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
precision tang file knife shape 150mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
precision tang file flat thin 150mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
precision tang file square 150mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
Pırazvanalı Flat Files, Flat Files, Precision Flat Files 100 mm, Swiss Cut 0, Coarse
Small, specialized flat files for delicate workpieces, with a cross-cut for coarse precision work. Suitable for steel up to 1,200 N/mm² (< 38 HRC).
precision tang file crossing oval 150mm Swiss cut 2, medium-fine
Small, handy files for use on delicate components.
precision pillar file hand extra slim 150mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
precision pillar file hand slim 150mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
precision pillar file hand regular 150mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
precision tang file three square 100mm Swiss cut 1, medium
Small, handy files for use on delicate components.
precision tang file half-round 100mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
precision tang file half-round slim 150mm Swiss cut 0, coarse
Small, handy files for use on delicate components.
precision tang file round 100mm Swiss cut 2, medium-fine
Small, handy files for use on delicate components.
machinist's file/rasp set 5-piece in plastic pouch 200mm for coarse stock removal, roughing
Quality files for industry and trade in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle.
machinist's file set WR 5-piece in plastic pouch 200mm cut 1 for coarse stock removal, roughing
Quality files for industry and trade in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle.
Machinist's file set WR 5-piece in plastic pouch 200 mm cut 2 general for roughing and finishing
Quality files for industry and trade in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle.
machinist's file set WR 5-piece in plastic pouch 200mm cut 3 for precision processing and finishing
Quality files for industry and trade in a protective and climate-resistant PVC pouch for storage in a toolbox or on a workbench. Each file comes with an ergonomic file handle.
plastic file handle PH08 90mm for key files, length 100-150mm
The PFERD TOOLS product range includes file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD TOOLS offers handles for a wide variety of files.
POLICAP abrasive spiral band PCH aluminium oxide dia. 5-7x85 mm A150 for general use
POLICAP abrasive spiral bands with a conical shape.
POLICAP abrasive cap PC tapered conical shape with radius end aluminium oxide dia. 5x11 mm A150 for general use
POLICAP abrasive caps in tapered conical shape with radius end WKG (previously shape G). The taper angle of the cone is 30°.
POLICAP abrasive cap PC conical shape with radius end aluminium oxide dia. 5x15 mm A150 for general use
POLICAP abrasive caps in conical shape with radius end KEL (previously shape L).
POLICAP abrasive cap PC cylindrical shape with radius end aluminium oxide dia. 5x11 mm A150 for general use
POLICAP abrasive caps in cylindrical shape with radius end WRC (previously shape C).
POLICAP abrasive cap PC cylindrical shape aluminium oxide dia. 5x10mm A150 for general use
POLICAP abrasive caps in cylindrical shape ZYA (previously shape A).
POLICAP set PCS110 tapered conical shape with radius end aluminium oxide for general use
Set of different POLICAP abrasive caps with matching holder.
POLICLEAN PCLD non-woven cleaning fabric dia. 115x13 mm hole dia. 22.3 mm for coarse cleaning work
The non-woven cleaning material is glued onto a glass-fabric base. This makes POLICLEAN discs suitable for use in face-down grinding. For coarse cleaning work, e.g. removing paint, scale, heat discolouration, rust and adhesive residue.
POLICLEAN PCLS non-woven cleaning fabric dia. 100x13 mm hole dia. 13 mm for coarse cleaning work
For coarse cleaning work, e.g. removing paint, scale, heat discolouration, rust and adhesive residues in peripheral grinding.
POLICLEAN PCLS non-woven grinding drum dia. 100x100 mm hole dia. 19 mm for coarse cleaning work
For coarse cleaning work, e.g. removing paint, scale, heat discolouration, rust and adhesive residues in peripheral grinding.
POLICLEAN PCLZY non-woven cleaning fabric dia. 100x13 mm shank dia. 6 mm for coarse cleaning work
For coarse cleaning work, e.g. removing paint, scale, heat discolouration, rust and adhesive residues in peripheral grinding.
POLICO abrasive cones PCO aluminium oxide dia. 10x50mm A150 for general use
For general grinding work on metals and other materials.
POLIFAN flap disc PFC 115x22.23 mm conical A-COOL 40 SG INOX+ALU stainless steel/aluminium
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
POLIFAN flap disc PFC 115x22.23 mm conical A120 Uni. Line PSF STEELOX steel/stainless steel
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
POLIFAN flap disc PFC 115x22.23 mm conical A120 SG STEELOX steel/stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
POLIFAN CURVE flap disc PFR 115x22.23 mm width L A40 Special Line SGP ALU for aluminium
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
POLIFAN flap disc PFC 115x22.23 mm conical CO-COOL 40 SG STEELOX steel/stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
POLIFAN flap disc PFC 115x22.23 mm conical CO-FREEZE 36 SG INOX stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
POLIFAN STRONG flap disc PFC 115x22.23 mm conical CO-FREEZE 36 SGP INOX for stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
POLIFAN CURVE flap disc PFR 115x22.23 mm width L CO60 SGP STEELOX for steel/stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
POLIFAN flap disc PFC 100x16 mm conical Z120 Universal Line PSF STEELOX steel/stainless steel
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
POLIFAN flap disc PFC 115x22.23 mm conical Z40 Universal Line PSF TRIM STEELOX for steel/stainless steel
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
POLIFAN POWER flap disc PFC 115x22.23 mm conical Z120 SG STEELOX steel/stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
POLIFAN POWER flap disc PFC 115x22.23 mm conical Z40 Performance Line SG TRIM STEELOX for steel/stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
POLIFAN CURVE flap disc PFR 115x22.23 mm width L Z40 SGP STEELOX for steel/stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
POLIFAN STRONG flap disc PFC 115x22.23 mm conical Z36 Special Line SGP STEEL for steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
POLIFLAP rubber flap PFL-GL 50x55 mm as replacement for worn flaps
POLIFLAP tools are ideal for the blending and restoration of surface textures, fine grinding of radii, contours, curved areas or large surfaces.
Poliflex grinding block set bond PUR SIC for fine grinding and finishing
The rhomboidal shape even enables work to be effortlessly performed on hard-to-reach places such as corners. With a diamond cut-off wheel, the blocks can be minimized and adapted to the respective application as required.
Poliflex grinding block 30x60x115 mm bond PUR SIC120 for fine grinding and finishing
Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.
Poliflex disc PFD dia. 115x14 mm centre hole dia. 22.23 mm bond PUR medium-hard SIC150
Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.
Poliflex roller dia. 100x100 mm centre hole dia. 19 mm PU-STRUC SIC16 for structuring with drum grinder
Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.
Poliflex grinding point conical shape with radius end dia. 10x25 mm shank dia. 6 mm bond TX A120
Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.
Poliflex lens shape dia. 16x4 mm centre hole dia. 2 mm bond GR hard SIC220
Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances. They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications.
POLINOX pressed non-woven disc PNER dia. 115 mm centre hole dia. 22.23 mm medium-hard SIC fine for finishing
POLINOX unitized discs are used for face-down grinding on speed-adjustable angle grinders. Especially well-suited to work on larger surfaces. The compressed, non-woven material is bonded to a glass-fabric base.
POLINOX non-woven fibre-backing disc PNL dia. 115 mm centre hole dia. 22.23 mm A100 for fine grinding and finishing
POLINOX grinding discs consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are stuck to a glass-fabric backing pad, meaning that the discs can be used face-down. A long tool life is achieved through the dense packing of the flaps.
POLINOX non-woven fibre-backing disc PNZ dia. 115 mm centre hole dia. 22.23 mm A100 for fine grinding and finishing
POLINOX grinding discs consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven and abrasive-cloth flaps are stuck to a glass-fabric backing pad, meaning that the discs can be used face-down on large surfaces. A long tool life is achieved through the dense packing of the flaps.
POLINOX non-woven discs dia. 100 mm centre hole dia. 13 mm A100 for fine grinding and finishing
POLINOX discs are suited to flexible work on complicated tool contours, and are used in peripheral grinding applications.
POLINOX non-woven shop roll VBR 100 mm x 10 m aluminium oxide A100 for fine grinding and finishing
Suitable for very fine grinding on small to large surfaces and contours, and for manually cleaning metal and painted surfaces. Achieve matt and satin-finished surfaces. Highly open structure.
POLINOX non-woven material marbling discs dia. 40mm A100 for marbling surfaces
POLINOX discs for marbling tool holders are special tools for marbling surfaces.
POLINOX non-woven grinding drum PNG dia. 100x100 mm keyway 19 mm A100 for fine grinding and finishing
POLINOX grinding drums are especially well suited to work on large surfaces. The non-woven abrasive is made of several very wavily arranged strips of non-woven abrasive material, wound around a core. The wavy structure of the non-woven abrasive material permits seamless brush matting of surfaces.
POLINOX non-woven grinding drum PNL dia. 100x100 mm keyway 19 mm A100 for fine grinding and finishing
POLINOX grinding drums are especially well suited to work on large surfaces. The non-woven abrasive flaps are arranged radially. A long tool life is achieved through the very dense packing of the flaps.
POLINOX non-woven grinding drum PNZ dia. 100x100 mm keyway 19 mm A120/F for fine grinding and finishing
POLINOX grinding drums are especially well suited to work on large surfaces. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. The flap structure facilitates improved stock removal and achieves a coarser surface finish.
POLINOX non-woven mounted grinding wheel PNG dia. 100x50 mm shank dia. 6 mm A100 for fine grinding and finishing
POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. They are made of several very wavily arranged strips of non-woven abrasive material, wound around a core. The wavy structure of the non-woven abrasive material permits seamless brush matting of surfaces.
POLINOX non-woven mounted grinding wheel PNL dia. 30x25 mm shank dia. 6 mm A100 for fine grinding and finishing
POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are arranged radially. A long tool life is achieved through the dense packing of the flaps. The tool is particularly used for surface work.
POLINOX non-woven mounted grinding wheel High Performance PNL dia. 40x20 mm shank dia. 6 mm A100 for fine grinding and finishing
POLINOX mounted grinding wheels HP consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps. An extremely long tool life is achieved through the dense packing of the flaps. The tool is particularly used for surface work.
POLINOX non-woven mounted grinding wheel PNR dia. 25x15 mm shank dia. 2.35 mm A100 for fine grinding and finishing
POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple (axial) disc layers. Since the individual non-woven discs are not interconnected, the abrasive surface adapts easily to different workpiece contours, e.g. when working on profiles or pipes.
POLINOX non-woven mounted grinding wheel PNZ dia. 100x50 mm shank dia. 6 mm A100 for fine grinding and finishing
POLINOX mounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. This flap structure facilitates improved stock removal and achieves a coarser surface finish.
POLINOX pressed non-woven grinding point conical shape PNER dia. 10x25 mm shank dia. 3 mm hard A coarse for finishing
POLINOX grinding points PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain and the appropriate bond result in non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing.
POLINOX pressed non-woven wheel PNER dia. 125x6 mm centre hole dia. 22.23 mm hard A fine for finishing
POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing.
POLINOX non-woven unmounted grinding wheel PNG dia. 100x50 mm thread 5/8-11 A100 for fine grinding and finishing
POLINOX unmounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. The flap structure facilitates improved stock removal and achieves a coarser surface finish.
POLINOX wound non-woven wheel PNK dia. 150x25 mm centre hole dia. 25.4 mm soft A coarse for finishing
POLINOX convolute wheels PNK produce matt surface finishes.
POLINOX non-woven unmounted grinding wheel PNL dia. 100x50 mm thread 5/8-11 A100 for fine grinding and finishing
POLINOX unmounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive flaps are arranged radially. A long tool life is achieved through the dense packing of the flaps.
POLINOX non-woven unmounted grinding wheel PNG dia. 125x50 thread 5/8-11 A280 for fine grinding and finishing
Made of several slightly wavily arranged strips of non-woven abrasive material, wound around a metal core. The open arrangement and high flexibility of the non-woven abrasive material enables exceptional adaptation to contours. This makes seamless brush matting of surfaces, profiles and pipes possible.
POLINOX non-woven unmounted grinding wheel PNZ dia. 100x50 mm thread 5/8-11 A100 for fine grinding and finishing
POLINOX unmounted grinding wheels consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive material is arranged in multiple radial flaps, with abrasive cloth interlayers. The flap structure facilitates improved stock removal and achieves a coarser surface finish.
POLINOX non-woven hand pad set PVSK 4-piece 154x224 mm A100,A 180,A 280,SIC 400 for finishing
PFERD TOOLS offers a wide selection of coated abrasive tools for working on different workpiece geometries and materials. They consist of a base, a base bond and a coating bond for the abrasive grain to adhere to. Depending on the grit size, coated abrasive tools can achieve a high stock removal rate or a very fine surface finish.
POLINOX non-woven hand pads PVSK 150x225 mm aluminium oxide A100 for fine grinding and finishing (10)
Suitable for very fine grinding on small to large surfaces and contours, and for manually cleaning metal and painted surfaces. Achieve matt and satin-finished surfaces. Highly open structure.
POLINOX non-woven cross buff PNST dia. 19 mm thread 8-32 UNC A100 for fine grinding and finishing
POLINOX cross buffs consist of non-woven polyamide abrasive, into which abrasive grain is integrated. The non-woven abrasive is star-shaped and stacked in layers which are connected in the centre. Particularly suitable for narrow application areas and hard-to-reach places such as drilled holes and indentations. POLINOX cross buffs are suitable for cleaning, deburring and fine grinding of inner surfaces and contours.
POLIROLL PRK conical cartridge rolls dia. 10x25 mm hole dia. 3 mm aluminium oxide A150
For general grinding work on metals and other materials.
POLIROLL PR cylindrical cartridge rolls dia. 6x25 mm hole dia. 3 mm aluminium oxide A150
For general grinding work on metals and other materials.
POLIROLL SET contents 150 pieces cylindrical and conical cartridge rolls with arbor
POLIROLL cartridge rolls consist of spirally wound, coated abrasives. The abrasive grain is embedded in the resinoid coating on the sturdy backing material, which achieves the best possible abrasive performance.
Accessory arbor BO for POLISCRATCH brush with M14 on 8 mm shank
For mounting POLISCRATCH brushes on straight grinders, flexible shafts or power drills.
POLISTAR-TUBE PST-T dia. 100 mm centre hole dia. 5 mm A60 for grinding holes and pipes
POLISTAR-TUBE are multi-layered cross buffs that are riveted together. They are used especially for working on the inner surfaces of pipes and pipe bends.
POLISTAR PST dia. 20 mm centre hole dia. 1.6 mm A120 for grinding holes and pipes
POLISTAR cross buffs are flexible tools that were developed especially for working on the inner surfaces of holes and pipes.
POLIVLIES hook and loop disc PVKR aluminium oxide dia. 115 mm hole dia. 22 mm A100G for fine grinding & finishing with an angle grinder
POLIVLIES hook and loop discs are suited to grinding larger surfaces. The flexible system comprising a POLIVLIES hook and loop disc and the associated POLIVLIES hook and loop disc holder also enables use on contours. The pre-punched holes mean that they can be ideally centred on and used with various backing pads.
POLIVLIES flap discs PVL-R
POLIVLIES-CURVE flap disc PVL-R with aluminum oxide abrasive, 115 mm diameter, 22.23 mm bore and grit 100 G. Developed for work on filler welds and precision grinding.
POLIVLIES flap disc set PVL aluminium oxide dia. 115 mm centre hole dia. 22.23 mm A100,180,280
Non-woven abrasives come into their own where other grinding tools reach their limits and are unable to produce the desired results. The elastic properties of the polyamide fibres and the positive effect of the non-woven abrasive give rise to outstanding, gentle finishing tools. The abrasive properties of non-woven tools are adapted to different applications and provide an excellent solution for many applications in metal working and finishing. They are also suitable for working on other hard-to-grind materials, such as ceramic, glass and plastic.
POLIVLIES flap disc PVL aluminium oxide dia. 115 mm hole 22.23 mm A100G for fine grinding
For general coarse to fine grinding applications in industry and professional trades.
POLIVLIES flap disc PVZ ceramic dia. 115 mm hole 22.23 mm CO-COOL120/A240F for fine grinding
For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well. Consistently high performance due to self-sharpening ceramic oxide grain. Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding.
POLIVLIES flap disc set PVZ ceramic dia. 115 mm centre hole dia. 22.23 mm CO-COOL60/G,80/M,120/F
Non-woven abrasives come into their own where other grinding tools reach their limits and are unable to produce the desired results. The elastic properties of the polyamide fibres and the positive effect of the non-woven abrasive give rise to outstanding, gentle finishing tools. The abrasive properties of non-woven tools are adapted to different applications and provide an excellent solution for many applications in metal working and finishing. They are also suitable for working on other hard-to-grind materials, such as ceramic, glass and plastic.
POS brush set HBG 1 row stainless steel steel brass wire dia. 0.30
Excellent for cleaning work in hard-to-reach areas, e.g. angles, corners and pipes.
Robot spindle PWA 11/120 RS 12,000 RPM/1,100 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Tungsten carbide high-performance burr MICRO tree shape with radius end RBF dia. 03x07 mm shank dia. 3 mm HICOAT coated for finishing
Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr tree shape with radius end RBF dia. 03x07 mm shank dia. 3 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr conical shape KEL dia. 10x20 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr conical shape KEL dia. 12x30 mm shank dia. 6 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr MICRO cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm HICOAT coated for finishing
Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Rail cut-off wheel T 350x4.0x22.23 mm Universal Line PSF RAIL for railway rails
The PFERD TOOLS product range offers rail cut-off wheels (RAIL) in different dimensions. Rail cut-off wheels are used for fast and economical cutting of rails.
Rail cut-off wheel T 300x3.8x25.4 mm Performance Line SG RAIL for railway rails
The PFERD TOOLS product range offers rail cut-off wheels (RAIL) in different dimensions. Rail cut-off wheels are used for fast and economical cutting of rails.
Connecting cable RCK AK 1.5 metres
1.5 metre RCK connecting cable for the use of RCK handpieces. Only suitable for RCK handpieces > 300 watts.
Grip RCK GR STG KPL for control device
The grip and the reducers are fastened to the control device. The set consists of an RCK grip which makes it easier to transport the RCK control device, plus two handpiece reducers for secure placement with a diameter of 24 mm and two with a diameter of 30 mm.
Handpiece support set RCK HA SUPPORT SET
The RCK handpiece support set makes it possible to keep the handpieces tidy and secure on the control device.
Rapid charger RCK SL with universal IEC power connector
Rapid charger with universal IEC power connector.
Control device RCK STG 10/800 80,000 RPM/1,560 watts
The RCK drive system with stepless rotational speed regulation is an innovative solution that generates less noise and lower vibrations than conventional drives. In combination with the mobile control device and various handpieces, the system is particularly light, comfortable and flexible to use for operators. The handpieces also enable a wide range of tools to be used in virtually any industry.
Belt grinder handpiece RCK B 4/100 10,000-5,000 RPM/380 watts
The RCK drive system with stepless rotational speed regulation is an innovative solution that generates less noise and lower vibrations than conventional drives. In combination with the mobile control device and various handpieces, the system is particularly light, comfortable and flexible to use for operators. The handpieces also enable a wide range of tools to be used in virtually any industry.
Rigid extension STV20 length 200 mm incl. HA 4 G16/G22 STV max. RPM 25,000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV20 length 400 mm incl. HA 4 G16/G22 STV max. RPM 25,000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV20 length 600 mm incl. HA 4 G16/G22 STV max. RPM 25,000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV20 length 250 mm incl. HA 4 G16/G22 STV max. RPM 25,000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV27 length 500 mm without handpiece max. RPM 25,000
Rigid extensions are suitable for hard-to-reach applications.
rigid extension STV33 length 1000mm without handpiece
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV33 length 250 mm without handpiece max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
rigid extension STV33 length 500mm without handpiece
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV13 length 1000 mm without handpiece max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV13 length 300 mm incl. 6 mm collet max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV13 length 500 mm incl. 6 mm collet max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV13 length 800 mm incl. 6 mm collet max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV9 length 1000 mm incl. 3 mm collet max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV9 length 300 mm incl. 3 mm collet max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV9 length 500 mm incl. 3 mm collet max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
Rigid extension STV9 length 800 mm incl. 3 mm collet max. RPM 25.000
Rigid extensions are suitable for hard-to-reach applications.
shop roll holder SRH storage of one roll suitable for wall mounting
Holder for wall-mounting: for storing and tearing off to the required length as necessary.
precision needle file set 12-piece in plastic pouch 140mm Swiss cut 1, medium
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
stationary cut-off wheel T 250x1.8x30 mm "medium-hard" HD STEEL for steel 100 m/s
The PFERD TOOLS product range provides tools for the most demanding cutting work with its stationary cut-off wheels. Stationary cut-off wheels are available in a variety of versions and dimensions.
Stationary cut-off wheel T 400x4.8x40 mm "very hard" HD CAST+STEEL for cast material/steel 100 m/s
The PFERD TOOLS product range provides tools for the most demanding cutting work with its stationary cut-off wheels. Stationary cut-off wheels are available in a variety of versions and dimensions.
Robot spindle WT 10 G28 RS max. 12,000 RPM
Angle drive for stationary applications. Can be connected to all flexible shafts with G28 thread (instead of the handpiece). Connection to flexible shaft can be pivoted 360°. With M14 spindle thread and dia. 22.23 mm tool mounting.
Robot spindle HAQ 10 G28 RS max. 18,000 RPM
Straight handpiece for stationary applications. Can be connected to all flexible shafts with G28 sliding coupling. The maximum rotational speed is 18,000 RPM.
Robot spindle PGAS 11/58 RS 5,800 RPM/1,100 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGAS 2/800 RS 80,000 RPM/110 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGAS 3/370 RS 37,000 RPM/320 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGAS 4/12 RS 1,200 RPM/380 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGAS 4/220 RS 22,000 RPM/400 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGAS 4/24 RS 2,400 RPM/380 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGAS 4/280 RS 28,000 RPM/380 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGAS 4/52 RS 5,200 RPM/380 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGAS 8/170 RS 17,000 RPM/800 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PGTS 1/1000 RS 100,000 RPM/100 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PWAS 4/180 RS 18,000 RPM/380 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Robot spindle PWAS 4/52 RS 5,200 RPM/380 watts
PFERD TOOLS robot spindles are manufactured according to the most stringent quality criteria and the latest technological standards, and are ideal for stationary applications in robot cells and machine tools and for installation in transfer lines. Whether you have a general or a specialized application, the comprehensive PFERD TOOLS range offers the ideal combination of innovative tools and powerful, durable robot spindles – all from a single source.
Shaft support WAL 4-12
Matching accessories for Mammoth Electronic flexible shaft drive.
TC high-performance burr MICRO KZW dia 6x13mm shank dia 6mm HICOAT coated special shape chamfering/deburring work in robot applications
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They are well suited to robot applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide profile cylinder burr PZF cyl. with radius end WRC dia. 03x20x65mm shank dia. 3mm for locksmiths, police and fire service
The profile cylinder burr PZF for locksmiths from PFERD TOOLS is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD TOOLS impresses with its good tool life, despite the challenging application.
Tungsten carbide profile cylinder burr PZF COARSE dia. 04x22x60 mm shank dia. 6 mm for locksmiths, police and fire service
The profile cylinder burr PZF for locksmiths from PFERD TOOLS is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD TOOLS impresses with its good tool life, despite the challenging application.
TC high-perf. burr conical counterbore shape KSK dia 10x5mm shank dia 6mm Z3 HICOAT coated for chamfer/deburring work, robot applications
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
TC high-perf. burr KSK-WKN dia. 10x11 mm shank dia. 6x75 mm Z3 HICOAT coated special shape chamfering/deburring work in robot applications
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
TC high-performance burr MICRO KZW dia 12x25mm shank dia 6mm HICOAT coated special shape chamfering/deburring work in robot applications
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They are well suited to robot applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide profile cylinder burr PZF dia. 04x22x60 shank dia. 6 mm for locksmiths, police and fire service
The profile cylinder burr PZF for locksmiths from PFERD TOOLS is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD TOOLS impresses with its good tool life, despite the challenging application.
Tungsten carbide profile cylinder burr PZF ALU dia. 04x24x60 mm shank dia. 6 mm for locksmiths, police and fire service
The profile cylinder burr PZF for locksmiths from PFERD TOOLS is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD TOOLS impresses with its good tool life, despite the challenging application.
Tungsten carbide profile cylinder burr PZF cyl. with radius end WRC dia. 04x20x60mm shank dia. 6mm for locksmiths, police and fire service
The profile cylinder burr PZF for locksmiths from PFERD TOOLS is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD TOOLS impresses with its good tool life, despite the challenging application.
TC high-perf. burr ALU SKM-ZYA dia. 6x25 mm shk. dia. 6x120 mm HICOAT coated special shape chamfering/deburring work in robot applications
Special burr shape for robot-guided aluminium processing.
TC high-perf. burr inverted cone WKN dia. 10x03 mm shank dia. 6x75 mm Z3 HICOAT coated chamfering/deburring work in robot applications
Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
TC high-performance burr ALU cyl. ZYA dia. 10x19mm shank dia.6mm HICOAT coated with ball bearing chamfer/deburring work robot applications
The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
medium-hard felt polishing points conical shape dia. 6x10 mm shank dia. 2.35 mm
Due to their hardness and flexibility, felt points are used when the exact form of geometric shapes has to be maintained.
Aluminium oxide mounted flap wheel F dia. 15x20 mm shank dia. 6 mm length 60 mm flaps 6x2 flaps A120 for fine grinding and finishing
On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure. Their flexibility means they can adapt perfectly to very fine workpiece contours and are also suitable for very small holes and inner pipe diameters. The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond.
mounted flap wheel set FSO 5400 dia. 40 to 80mm width 15 to 40mm grit 60 to 150
PFERD TOOLS offers a wide selection of coated abrasive tools for working on different workpiece geometries and materials. They consist of a base, a base bond and a coating bond for the abrasive grain to adhere to. Depending on the grit size, coated abrasive tools can achieve a high stock removal rate or a very fine surface finish.
Aluminium oxide mounted flap wheel F dia. 10x10 mm shank dia. 3 mm A120 for fine grinding & finishing
On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure. Their flexibility enables them to adapt perfectly to the contours of the workpiece. The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond.
Cloth ring TR cotton dia. 22x10 mm shank dia. 3 mm for buffing with polishing paste
Shank-mounted cloth rings are used with polishing pastes for pre-polishing, gloss polishing and high-gloss polishing in tool- and mould-making applications.
CAST mounted point pointed tree dia. 20x50 mm shank dia. 6 mm A30 for grey and nodular cast iron
The CAST design is particularly well-suited to surface work on grey and nodular cast iron in combination with high peripheral speeds.
CAST EDGE mounted point pointed tree dia. 20x32 mm shank dia. 6 mm SIC30 for grey and nodular cast iron
The pointed tree shape SP is exceptionally well-suited for machining small holes and bores.
CAST STEEL mounted point pointed tree dia. 20x50 mm shank dia. 6 mm A30 for cast steel
The CAST STEEL design is particularly well-suited to rough general work on cast steel.
STEEL mounted point pointed tree dia. 8x16 mm shank dia. 6 mm A46 for steel and cast steel
The STEEL type is the most general bond for machining steel and cast steel.
STEEL EDGE mounted point pointed tree dia. 3x6 mm shank dia. 3 mm A100 for steel and cast steel
The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components.
TOUGH mounted point pointed tree dia. 3x6 mm shank dia. 3 mm CO100 for materials that are difficult to machine
The TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits.
STEEL EDGE mounted point cup shape dia. 20x16 mm shank dia. 6 mm A30 for steel and cast steel
The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components.
CAST mounted point conical dia. 10x25 mm shank dia. 6 mm A46 for grey and nodular cast iron
The CAST design is particularly well-suited to surface work on grey and nodular cast iron in combination with high peripheral speeds.
CAST EDGE mounted point conical dia. 16x45 mm shank dia. 6 mm SIC46 for grey and nodular cast iron (10)
The conical shape KE is designed for a comfortable working position during surface grinding and grinding of chamfers.
CAST STEEL mounted point conical dia. 16x45 mm shank dia. 6 mm A46 for cast steel
The CAST STEEL design is particularly well-suited to rough general work on cast steel.
INOX mounted point conical dia. 20x20 mm shank dia. 6 mm A30 for stainless steel
The INOX design is specifically intended for surface work on stainless steel (INOX) and for general use on non-ferrous metals and bronze.
INOX EDGE mounted point conical dia. 10x25 mm shank dia. 6 mm A46 for stainless steel
The INOX EDGE design is particularly well-suited to edge grinding on stainless steel (INOX).
STEEL mounted point conical dia. 10x25 mm shank dia. 6 mm A46 for steel and cast steel
The STEEL type is the most general bond for machining steel and cast steel.
STEEL EDGE mounted point conical dia. 10x10 mm shank dia. 3 mm A46 for steel and cast steel
The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components.
TOUGH mounted point conical dia. 10x25 mm shank dia. 6 mm CO46 for materials that are difficult to machine
The TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits.
INOX mounted point conical dia. 25x32 mm shank dia. 6 mm A30 for stainless steel
The INOX design is specifically intended for surface work on stainless steel (INOX) and for general use on non-ferrous metals and bronze.
STEEL mounted point cylindrical with radius end dia. 13x20 mm shank dia. 6 mm A46 for steel and cast steel
The STEEL type is the most general bond for machining steel and cast steel.
STEEL EDGE mounted point cylindrical with radius end dia. 3x6 mm shank dia. 3 mm A100 for steel and cast steel
The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components.
CAST mounted point shape A 11 dia. 22x50 mm shank dia. 6 mm A30 for grey and nodular cast iron
The CAST design is particularly well-suited to surface work on grey and nodular cast iron in combination with high peripheral speeds.
CAST EDGE mounted point shape A 11 dia. 22x50 mm shank dia. 6 mm SIC30 for grey and nodular cast iron
Series A mounted points are generally used on larger components. Due to the special shapes of series A mounted points, it is possible to grind in a variety of contours.
INOX mounted point shape A 1 dia. 19x64 mm shank dia. 6 mm A60 for stainless steel
The INOX design is specifically intended for surface work on stainless steel (INOX) and for general use on non-ferrous metals and bronze.
INOX EDGE mounted point shape A 1 dia. 19x64 mm shank dia. 6 mm A30 for stainless steel
The INOX EDGE design is particularly well-suited to edge grinding on stainless steel (INOX).
STEEL mounted point shape A 1 dia. 19x64 mm shank dia. 6.3 mm A30 for steel and cast steel
The STEEL type is the most general bond for machining steel and cast steel.
STEEL EDGE mounted point shape A 1 dia. 19x64 mm shank dia. 6 mm A30 for steel and cast steel
The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components.
STEEL EDGE mounted point shape B 102 dia. 16x13 mm shank dia. 3 mm A80 for steel and cast steel
The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components.
ALU mounted point cylindrical dia. 3x6 mm shank dia. 3 mm SiC80 for aluminium
The ALU type is particularly well-suited to general use on aluminium and non-ferrous metals.
CAST mounted point cylindrical dia. 16x32 mm shank dia. 6 mm A30 for grey and nodular cast iron
The CAST design is particularly well-suited to surface work on grey and nodular cast iron in combination with high peripheral speeds.
CAST EDGE mounted point cylindrical dia. 16x32 mm shank dia. 6 mm SIC30 for grey and nodular cast iron
The cylindrical shape ZY is ideal for grinding bores, radii and contours.
CAST STEEL mounted point cylindrical dia. 20x40 mm shank dia. 6 mm A30 for cast steel
The CAST STEEL design is particularly well-suited to rough general work on cast steel.
INOX mounted point cylindrical dia. 8x16 mm shank dia. 6 mm A46 for stainless steel
The INOX design is specifically intended for surface work on stainless steel (INOX) and for general use on non-ferrous metals and bronze.
INOX EDGE mounted point cylindrical dia. 8x16 mm shank dia. 6 mm A46 for stainless steel
The INOX EDGE design is particularly well-suited to edge grinding on stainless steel (INOX).
RUBBER mounted point cylindrical dia. 16x32 mm shank dia. 6 mm AH1 for rubber
The RUBBER type is specifically designed for general use on soft materials such as rubber, plastic and wood.
STEEL mounted point cylindrical dia. 2x5 mm shank dia. 3 mm A100 for steel and cast steel
The STEEL type is the most general bond for machining steel and cast steel.
STEEL EDGE mounted point cylindrical dia. 2x5 mm shank dia. 3 mm A100 for steel and cast steel
The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components.
TOUGH mounted point cylindrical dia. 1x5 mm shank dia. 3 mm CO320 for materials that are difficult to machine
The TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits.
INOX EDGE mounted point ball dia. 16x16 mm shank dia. 6 mm A30 for stainless steel
The INOX EDGE design is particularly well-suited to edge grinding on stainless steel (INOX).
RUBBER mounted point ball dia. 40x40 mm shank dia. 6 mm AH2 for rubber
The RUBBER type is specifically designed for general use on soft materials such as rubber, plastic and wood.
STEEL mounted point ball dia. 13x13 mm shank dia. 6 mm A46 for steel and cast steel
The STEEL type is the most general bond for machining steel and cast steel.
STEEL EDGE mounted point ball dia. 3x3 mm shank dia. 3 mm A100 for steel and cast steel
The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components.
TOUGH mounted point ball dia. 3x3 mm shank dia. 3 mm CO60 for materials that are difficult to machine
The TOUGH type is specifically designed for use on titanium materials, nickel-based and cobalt-based alloys, hardened steel components and built-up weld deposits.
CHAIN SHARP grinding point CS-G cylindrical dia. 3.8x16 mm shank dia. 3 mm A80 for sharpening saw chains
The mounted points for saw chains are exceptionally well suited to mechanical sharpening of saw chains.
COMBIDISC backing pad for CD system 35x35 mm SBH with shank dia. 6 mm
Matching arbor for COMBIDISC grinding tools for linear grinding.
Tungsten carbide strike plate burr SBF dia. 06x20x80 mm shank dia. 6 mm for locksmiths, police and fire service
The profile cylinder burr PZF for locksmiths from PFERD TOOLS is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD TOOLS impresses with its good tool life, despite the challenging application.
Ceramic fibre file KFF flat 0.5x4x150 mm A180 for tool and mould-making
Ceramic fibre files are made of high-grade ceramic fibres embedded in a special resinoid bond. They are suitable for use on surfaces and hard-to-reach areas in tool and mould-making.
band saw file three square 150mm cut 2 general for sharpening
Three square saw files from PFERD TOOLS are triangular tapered files with tang. The saw files are suitable for use on steel and cast steel and especially suitable for sharpening sawing tools. PFERD TOOLS offers three square saw files in various versions and shapes.
Accessory for ALUMASTER F115/125, spare-parts set
With the service sets from PFERD TOOLS, the most common parts can be replaced in case of loss or damage. PFERD TOOLS offers both a repair set for hole saw arbors and service sets for the ALUMASTER High Speed Disc and the High Speed Torus Cutter.
Clamping nut SPM 90011450 M14
PFERD TOOLS offers different clamping nuts for tool drives.
Clamping flange SPF 90011455
PFERD TOOLS offers different clamping flanges for tool drives.
Tungsten carbide high-performance burr MICRO cylindrical ZYA dia. 03x13 mm shank dia. 3 mm HICOAT coated for finishing
Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr cylindrical ZYA dia. 10x20 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr cylindrical ZYA dia. 03x13 mm shank dia. 3 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr MICRO cylindrical ZYAS end cut dia. 06x16 mm shank dia. 6 mm HICOAT coated for finishing
Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr cylindrical ZYAS end cut dia. 06x16 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr cylindrical ZYAS end cut dia. 03x13 mm shank dia. 3 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr MICRO pointed tree SPG dia. 03x07 mm shank dia. 3 mm HICOAT coated for finishing
Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr pointed tree SPG dia. 06x18 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr pointed tree SPG dia. 03x07 mm shank dia. 3 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr MICRO conical pointed SKM dia. 03x07 mm shank dia. 3 mm HICOAT coated for finishing
Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr conical pointed SKM dia. 06x18 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr conical pointed SKM dia. 03x07 mm shank dia. 3 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
sealing ring DR 1/2"
Connecting fittings for air grinders.
sealing ring 1/4"
Connecting fittings for air grinders.
sealing ring 1/8"
Connecting fittings for air grinders.
threaded nut GWI 1/2-1/2
Connecting fittings for air grinders.
Abrasive spiral band set 13-piece aluminium oxide dia. 10x20 mm A60,80,150,240 with holder shank dia. 6 mm
PFERD TOOLS offers a wide selection of coated abrasive tools for working on different workpiece geometries and materials. They consist of a base, a base bond and a coating bond for the abrasive grain to adhere to. Depending on the grit size, coated abrasive tools can achieve a high stock removal rate or a very fine surface finish.
Aluminium oxide abrasive spiral band GSB conical dia. 14-21x63 mm A150 for general use
For general applications from coarse to fine grinding.
aluminium oxide abrasive spiral band GSB cylindrical dia. 4x10mm A150 for general use
For general applications from coarse to fine grinding.
STEEL EDGE mounted point set 10-piece shank dia. 6 mm A30 for steel and cast steel
The set contains 10 grinding points with a 6 mm shank diameter in the most common shapes and dimensions.
brush set large BSO crimped steel
Set of different wheel, cup and end brushes with a 6 mm shank.
STEEL mounted point set 5-piece shank dia. 6 mm A30/46/60 for steel and cast steel
The set contains five STEEL-type grinding points with 6 mm shank diameter in the most common shapes and dimensions for the most common applications.
Cut-off wheel/flap disc set 125 Universal Line PSF STEELOX EHT 1.0/PFC Z60 for steel/stainless steel
The set contains three cut-off wheels and a POLIFAN flap disc for steel and stainless steel (INOX) with high cutting performance/stock removal rate and good tool life.
felt sheet FK P hard 12x250x250mm for general polishing work can be divided as desired
Felt sheets are suited to a very wide variety of polishing applications.
Grinding paste SFP 250g grit SIC 150 250g for fine grinding and grinding in of valves and bearings
Oil-soluble grinding pastes with sharp-edged SiC grain for fine grinding work, e.g. grinding in valve seats, shaft bearings and as a preparation for polishing with felt polishing tools and cloth rings.
Grinding wheel E 115x4.1x22.23 mm CERAMIC Performance Line SG STEELOX for steel/stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
Grinding wheel E 100x6.3x16 mm Universal Line PSF STEEL for steel
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
Grinding wheel E 100x6.3x16 mm Universal Line PSF STEELOX for steel/stainless steel
The entry-level range Universal Line PSF includes robust tools for processing the most common materials. Universal Line PSF tools achieve good results with high economic efficiency.
Grinding wheel E 115x7.2x22.23 mm Performance Line SG ALU for aluminium
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Grinding wheel E 180x7.2x22.23 mm Performance Line SG CAST+ALU for cast material/aluminium
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Grinding wheel E 115x7.2x22.23 mm Performance Line SG CAST+STONE for cast material/stone
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Grinding wheel E 115x4.1x22.23 mm Performance Line SG INOX for stainless steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Grinding wheel E 100x4.1x16 mm Performance Line SG STEEL for steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
SG STEEL+INOX+CAST ★★★☆ Grinding Wheels
SG Performance Series grinding wheel for steel, stainless steel and cast iron. Features aluminium oxide A abrasive, high grinding performance and good tool life, including in hard-to-reach areas.
Grinding wheel E 115x7.4x22.23 mm Special Line SGP STEELOX for steel/stainless steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
Grinding wheel E 180x7.2x22.23 mm ZIRKON Special Line SGP CAST for cast material
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Grinding wheel E 115x7.2x22.23 mm ZIRKON Performance Line SG CAST+STEEL for cast material/steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
Grinding wheel E 115x7.2x22.23 mm ZIRKON Special Line SGP STEEL for steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
Polishing stone square 13x3x150 mm SiC150 for hard materials in tool and mould-making
PFERD TOOLS grindstones and polishing stones are versatile tools for finish machining on moulds in tool and mould-making.
Polishing stone square 13x3x150 mm A400 general use in tool and mould-making
PFERD TOOLS grindstones and polishing stones are versatile tools for finish machining on moulds in tool and mould-making.
finishing stone arbor for the manual filing tool for clamping all cross sections
The arbor for the manual filing tool is variably adjustable.
Finishing stone arbor for clamping cross sections 3x6 mm, 6x6 mm, 1.5x13 mm and 3x13 mm
Used for clamping four different cross sections.
grinding oil 410 Fe in spray can for steel
Grinding oils are used in applications with coated abrasive tools.
HSS pilot drill for tungsten carbide hole cutter dia. 16-55 mm, tool height 8 mm dia. 6 mm L 48 mm
Pilot drills from PFERD TOOLS are used in combination with HSS hole saw arbors, quick-mounting systems for hole saws and hole cutters.
Tungsten carbide engraving needle HM-GN MST32 F
Tungsten carbide engraving needles for marking pens. For applying markings and labels on metal, glass, plastics and on hardened tool steel.
dressing stone 30x50x120mm SiC30 for profiling and dressing
Dressing stone with coarse grit (grit size 30) for coarse dressing work. The rubber backing provides a slip-free grip and protects the support surfaces from damage.
Double open-ended spanner DM SW 20/22MM
PFERD TOOLS offers different single-head spanners (EM) and double open-ended spanners (DM) with different widths across flats (SW).
Overhead trolley B1 ME
Matching accessories for Mammoth Electronic flexible shaft drive.
Bimetal hole saw set Co8/M42 14-piece for mechanics
The set contains nine HSS hole saws in the most common diameters, including accessories, for mechanics in the construction, container and pipeline industries. It is supplied in a well-arranged plastic box which protects against dirt and damage. Operating instructions are included. It is possible to use hole saws LS 35 and LS 38 with the LSA adapter and washer.
Angle handpiece WZT 6 3.0 DPF/SRF with 3 mm collet max. RPM 18,000
Handpiece with telescopic system, can be connected to flexible shafts, with handpiece-side coupling DPF/SRF (DPF = fixed duplex spring, SRF = flexible expansion ring).
Angle handpiece WZT 6 45 ° 6.0 DPF/SRF with 6 mm collet max. RPM 18,000
Handpiece with telescopic system, can be connected to flexible shafts, with handpiece-side coupling DPF/SRF (DPF = fixed duplex spring, SRF = flexible expansion ring).
Base FME
Matching accessories for Mammoth Electronic flexible shaft drive.
stainless steel maintenance product SHINER IS-S 500 contents 500 ml in spray bottle
The highly effective cleaners and maintenance products can be used on different types of components.
Bimetal hole saw set Co8/M42 10-piece for installers
The set contains six HSS hole saws in the most common diameters, including accessories, for plumbers and sanitary engineers. It is supplied in a well-arranged plastic box which protects against dirt and damage. Operating instructions are included. It is possible to use hole saw LS 38 with the LSA adapter and washer.
Wooden file handle type HKSF 100 mm for chain saw files dia. 4.8-7.9 mm (1)
The PFERD TOOLS product range includes file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD TOOLS offers handles for a wide variety of files.
PFERD TOOLS Knife-Profile File 150 mm, Cut 2
150 mm knife-profile triangular file with cut 2, designed for general filing, surface roughening and finishing. Supplied without a handle.
Flat Engineer’s File
Flat rectangular PFERD TOOLS file, type 1122, with cut 1 for coarse stock removal and roughening. Supplied without handle in industrial packaging.
machinist's file square 100mm cut 1 for coarse stock removal, roughing
PFERD TOOLS produces files for the workshop with the highest quality standards. They achieve a long tool life and very good stock removal rates.
Flat File 100 mm, Cut 1
PFERD TOOLS flat file with cut 1, suitable for rough stock removal and roughening. Rectangular geometry, three-sided cut and one uncut side.
machinist's file three square 100mm cut 1 for coarse stock removal, roughing
PFERD TOOLS produces files for the workshop with the highest quality standards. They achieve a long tool life and very good stock removal rates.
Half-Round File 150 mm, Cut 1, for Coarse Material Removal and Roughening
PFERD TOOLS half-round file with cut on both sides, type 1152, designed for coarse material removal, roughening and work on radii. Supplied without handles.
machinist's file half-round pointed 100mm cut 1 for coarse stock removal, roughing
PFERD TOOLS produces files for the workshop with the highest quality standards. They achieve a long tool life and very good stock removal rates.
Round machinist’s file, 100 mm, cut 1, for rough stock removal and roughening
PFERD TOOLS round file with a 4 mm diameter, cut 1 and 100 mm length. Suitable for rough stock removal, roughening, deburring and work on radiused profiles. Supplied without handles in industrial packaging.
Face pin spanner STL SW 35x5MM
PFERD TOOLS offers different face pin spanners (STL) with different widths across flats (SW).
Tungsten carbide high-performance burr MICRO ball KUD dia. 03x02 mm shank dia. 3 mm HICOAT coated for finishing
Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ball KUD dia. 06x05 mm shank dia. 6 mm Z3 HICOAT coated universal medium
Cut 3 with high-quality HICOAT coating HC-FEP is especially well suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its good stock removal rate. It also allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ball KUD dia. 03x02 mm shank dia. 3 mm Z5 HICOAT coated universal fine
Cut 5 with high-quality HICOAT coating HC-FEP is especially well suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It produces good surfaces and allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Spare blade for hexalobular socket key
Torque spanners are special tools which make it possible to tighten screws or nuts with a defined force. They enable optimum and secure mounting.
Screw driver SDR TX15K
Hexalobular socket wrench (SDR TX) with a diameter of 15 mm.
TOUGH mounted point set 10-piece shank dia. 6 mm CO46 for materials that are difficult to machine
The set contains 10 grinding points with a 6 mm shank diameter in the most common shapes and dimensions.
COMBIDISC extraction system for backing pad CD or CDR dia. 50mm for a clean environment
The COMBIDISC DUST REMOVER removes grinding dust very effectively from the place that is being worked on. It can be used with all dust extraction systems (mobile or stationary). The DUST REMOVER can be used with CD and CDR type backing pads.
Trolley WA D ME
Matching accessories for Mammoth Electronic flexible shaft drive.
Tungsten carbide hole cutter/hole saw dia. 24x35 mm shank dia. 10 mm cutting depth 32 mm universal
Tungsten carbide hole cutters are professional tools for quick, precise hole-cutting (cut-outs) with a diameter of 16 to 105 mm. They are suitable for working on alloyed and non-alloyed steels, stainless steel (INOX), non-ferrous metals and plastics (including GRP). Tungsten carbide hole cutters are used on hand drills or on stationary machines. PFERD TOOLS hole cutters have an irregular tooth pitch (distance between teeth) to prevent tool chatter.
Tungsten carbide hole cutter/hole saw dia. 16x35 mm shank dia. 7 mm cutting depth 32 mm universal
Tungsten carbide hole cutters are professional tools for quick, precise hole-cutting (cut-outs) with a diameter of 16 to 105 mm. They are suitable for working on alloyed and non-alloyed steels, stainless steel (INOX), non-ferrous metals and plastics (including GRP). Tungsten carbide hole cutters are used on hand drills or on stationary machines. PFERD TOOLS hole cutters have an irregular tooth pitch (distance between teeth) to prevent tool chatter.
Tungsten carbide hole cutter/hole saw dia. 60x60 mm shank dia. 12 mm cutting depth 57 mm universal
Tungsten carbide hole cutters are professional tools for quick, precise hole-cutting (cut-outs) with a diameter of 16 to 105 mm. They are suitable for working on alloyed and non-alloyed steels, stainless steel (INOX), non-ferrous metals and plastics (including GRP). Tungsten carbide hole cutters are used on hand drills or on stationary machines. PFERD TOOLS hole cutters have an irregular tooth pitch (distance between teeth) to prevent tool chatter.
Tungsten carbide hole cutter/hole saw dia. 23x8 mm shank dia. 10 mm cutting depth 4 mm universal
Tungsten carbide hole cutters are professional tools for quick, precise hole-cutting (cut-outs) with a diameter of 16 to 105 mm. They are suitable for working on alloyed and non-alloyed steels, stainless steel (INOX), non-ferrous metals and plastics (including GRP). Tungsten carbide hole cutters are used on hand drills or on stationary machines. PFERD TOOLS hole cutters have an irregular tooth pitch (distance between teeth) to prevent tool chatter.
Tungsten carbide hole cutter/hole saw dia. 100x8 mm shank dia. 12 mm cutting depth 4 mm universal
Tungsten carbide hole cutters are professional tools for quick, precise hole-cutting (cut-outs) with a diameter of 16 to 105 mm. They are suitable for working on alloyed and non-alloyed steels, stainless steel (INOX), non-ferrous metals and plastics (including GRP). Tungsten carbide hole cutters are used on hand drills or on stationary machines. PFERD TOOLS hole cutters have an irregular tooth pitch (distance between teeth) to prevent tool chatter.
Tungsten carbide hole cutter/hole saw dia. 16x8 mm shank dia. 7 mm cutting depth 4 mm universal
Tungsten carbide hole cutters are professional tools for quick, precise hole-cutting (cut-outs) with a diameter of 16 to 105 mm. They are suitable for working on alloyed and non-alloyed steels, stainless steel (INOX), non-ferrous metals and plastics (including GRP). Tungsten carbide hole cutters are used on hand drills or on stationary machines. PFERD TOOLS hole cutters have an irregular tooth pitch (distance between teeth) to prevent tool chatter.
holder for tungsten carbide files type HMFH 132 with handle for flat tungsten carbide file HMF 13220
PFERD TOOLS offers holders for a range of files and file blades. The PFERD TOOLS product range includes riffler file holders, adjustable holders for car body files and holders for file blades, tungsten carbide files and hand deburrers.
Tungsten carbide file round dia. 10.0x50 mm 8 teeth/cm, for steel, steel materials >54 HRC
Round tungsten carbide files for work on concave shapes and for refining inner radii e.g. drip edges. Round tungsten carbide files with circumferential cut. The mounting system in the HMFH 51 R file holder allows the files to be rotated around their own axis in 60° steps.
Tungsten carbide copy milling burr 7 mm cylindrical ZYA dia. 03x25 mm shank dia. 3 mm Z4 universal medium fine
Tungsten carbide copy milling burrs by PFERD TOOLS are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould-making.
Tungsten carbide copy milling burr 7 mm inverted cone WKN dia. 08x26 mm shank dia. 6 mm Z4 universal medium fine
Tungsten carbide copy milling burrs by PFERD TOOLS are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould-making.
Tungsten carbide copy milling burr 7 mm MICRO cylindrical ZYA dia. 03x25 mm shank dia. 3 mm finishing
Tungsten carbide copy milling burrs by PFERD TOOLS are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould-making.
Tungsten carbide copy milling burr 7 mm MICRO inverted cone WKN dia. 08x26 mm shank dia. 6 mm finishing
Tungsten carbide copy milling burrs by PFERD TOOLS are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould-making.
CBN grinding point cylindrical dia. 6.0 mm TC shank dia. 6 mm B151 (coarse) for stationary internal grinding
Electroplated diamond and CBN grinding points are used for both wet and dry grinding.
arbor AF 14-1/4 CD
Arbor BO SPG6 10 M10 incl. hexagonal nut.
Solid carbide end mill dia. 6 mm, 3 flutes, >4xDC, chamfer 0.1 mm, uncoated, HA shank, Performance Aluminium
Thanks to their material-specific tool geometry, Performance Aluminium solid carbide end mills are ideally suited to machining aluminium alloys, non-ferrous metals and plastics.
Solid carbide end mill dia. 10 mm, 3 flutes, 2xDC, neck chip channel extra-long, chamfer 0.2 mm, uncoated, HA shank, Performance Aluminium
Thanks to their material-specific tool geometry, Performance Aluminium solid carbide end mills are ideally suited to machining aluminium alloys, non-ferrous metals and plastics.
Solid carbide end mill dia. 3 mm, 3 flutes, 2xDC, chamfer 0.05 mm 45°, uncoated, HA shank, Performance Aluminium
Thanks to their material-specific tool geometry, Performance Aluminium solid carbide end mills are ideally suited to machining aluminium alloys, non-ferrous metals and plastics.
Solid carbide end mill dia. 6 mm, 3 flutes, 2xDC, radius 0.5 mm, uncoated, HA shank, Performance Aluminium
Thanks to their material-specific tool geometry, Performance Aluminium solid carbide end mills are ideally suited to machining aluminium alloys, non-ferrous metals and plastics.
precision needle file three square 140mm Swiss cut 0, coarse
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
Saw file three square double extra slim 125 mm cut 2 general for sharpening
Three square saw files from PFERD TOOLS are triangular tapered files with tang. The saw files are suitable for use on steel and cast steel and especially suitable for sharpening sawing tools. PFERD TOOLS offers three square saw files in various versions and shapes.
saw file three square slim 100mm cut 2 general for sharpening
Three square saw files from PFERD TOOLS are triangular tapered files with tang. The saw files are suitable for use on steel and cast steel and especially suitable for sharpening sawing tools. PFERD TOOLS offers three square saw files in various versions and shapes.
saw file three square regular 150mm cut 2 general for sharpening
Three square saw files from PFERD TOOLS are triangular tapered files with tang. The saw files are suitable for use on steel and cast steel and especially suitable for sharpening sawing tools. PFERD TOOLS offers three square saw files in various versions and shapes.
saw file three square extra slim 100mm cut 2 general for sharpening
Three square saw files from PFERD TOOLS are triangular tapered files with tang. The saw files are suitable for use on steel and cast steel and especially suitable for sharpening sawing tools. PFERD TOOLS offers three square saw files in various versions and shapes.
cantsaw file three square 200mm cut 2 general for sharpening
Three square saw files from PFERD TOOLS are triangular tapered files with tang. The saw files are suitable for use on steel and cast steel and especially suitable for sharpening sawing tools. PFERD TOOLS offers three square saw files in various versions and shapes.
VHM deburring mill set 3-piece dia. 6/8/10 mm 90° TiAlN shank HB Universal Line chamfering deburring
The set contains three solid carbide end mills for deburring and chamfering. The solid carbide end mills are suitable for universal use in a variety of materials.
Solid carbide drill dia. 3 mm, 3xDC with IC, AlTin coating, HA shank, Universal
The solid carbide drills are suitable for universal use on a variety of materials.
Solid carbide drill dia. 3 mm, 5xDC with IC, AlTin coating, HA shank, Universal
The solid carbide drills are suitable for universal use on a variety of materials.
Solid carbide drill dia. 3 mm, 8xDC with IC, AlTin coating, HA shank, Universal
The solid carbide drills are suitable for universal use on a variety of materials.
Universal chamfer file (UKF) incl. file 110 mm for work on edges, deburring, chamfering
Rectangular file in a special plastic holder, angled cut on two sides. Ideal for easy and fast repair and for deburring on the guide rails of chain saws. Regular maintenance extends the service life of the guide rail and saw chain. Increases cutting precision and safety.
VHM corner mill long, 6 flutes, diameter 6 mm, sharp TiAlN shank HA Universal Line finishing trimming
The solid carbide end mills are suitable for universal use on a variety of materials.
VHM corner mill long, 4 flutes, diameter 3 mm 45° chamfer TiAlN shank HA Universal Line roughing finishing slot cutting
The solid carbide end mills are suitable for universal use on a variety of materials.
VHM corner mill long, 4 flutes, diameter 8 mm, radius 0.5 mm TiAlN shank HB Universal Line roughing finishing slot cutting
The solid carbide end mills are suitable for universal use on a variety of materials.
VHM corner mill long, 2 flutes, diameter 4 mm, sharp TiAlN shank HB Universal Line roughing finishing slot cutting
The solid carbide end mills are suitable for universal use on a variety of materials.
VHM corner mill long, 3 flutes, diameter 3 mm 45° chamfer TiAlN shank HB Universal Line roughing finishing slot cutting
The solid carbide end mills are suitable for universal use on a variety of materials.
VHM ball nose mill, long, 2 flutes, diameter 3 mm, TiAlN shank HA Universal Line profile cutting
The solid carbide end mills are suitable for universal use on a variety of materials.
HSS conical and deburring countersink UGT 90° dia. 10.4 mm shank dia. 6 mm DIN 335 C with unequal pitch
Conical countersinks from PFERD TOOLS are characterized by their particularly sharp flutes that are able to achieve very good results, even at low cutting speeds.
HSSE Co5 conical and deburring countersink 90° dia. 10.4 mm shank dia. 6 mm DIN 335 C with unequal pitch
Conical countersinks from PFERD TOOLS are characterized by their particularly sharp flutes that are able to achieve very good results, even at low cutting speeds.
Remote control cable FSTK 22
Matching accessories for Mammoth Electronic flexible shaft drive.
aluminium oxide abrasive belt BA 100x1000mm A120 for general use with a belt grinder
For general applications from coarse to fine grinding.
Non-woven abrasive belt VB 75x2000 mm A100 G for fine grinding and finishing with a belt grinder
Suitable for general work on metal surfaces in stationary applications, e.g. removing rough grinding traces, removing oxidation and light deburring work. Achieve matt and satin-finished surfaces.
Thread adapter AD M4/8-32 UNC
Depending on the PFERD TOOLS drive selected, different adapters are available.
Accessory wire stem with eyelet IBUS for tube brushes with thread 1/2", 1000 mm long
Suitable for work with tube brushes with a thread.
Accessory extension IBUV for tube brushes with thread 1/2", 1000 mm long
Suitable for work with tube brushes with a thread.
Cup brush knotted TBG dia. 100 mm M14 stainless steel wire dia. 0.35 mm angle grinders (1)
Aggressive brush. Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter.
cup brush knotted TBG dia. 100mm M14 stainless steel diamond wire dia. 0.50mm grit 270
The knots of the brush are knotted to 50% of the length.
Threaded quick coupling STGA 1/2-16/AC
Connecting fittings for air grinders.
quick coupling STGA 1/2 NW 12
Connecting fittings for air grinders.
precision needle file half-round 140mm Swiss cut 0, coarse
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
replacement file for paint peelers (LAH) hand 50mm cut 3-radial, finishing work
PFERD TOOLS offers a range of replacement files for different filing tools. Alongside replacement files for paint peelers and replacement file blades for universal chamfer files, chain saw files and depth gauge files for chain saw sharpeners are also available from PFERD TOOLS.
Replacement depth gauge file type 4130 9x6 mm 200 mm cut 2 for ChainSharp KSSG 90
PFERD TOOLS offers a range of replacement files for different filing tools. Alongside replacement files for paint peelers and replacement file blades for universal chamfer files, chain saw files and depth gauge files for chain saw sharpeners are also available from PFERD TOOLS.
replacement file for universal chamfer file (UKF) type KF110 hand 110mm cut 2
PFERD TOOLS offers a range of replacement files for different filing tools. Alongside replacement files for paint peelers and replacement file blades for universal chamfer files, chain saw files and depth gauge files for chain saw sharpeners are also available from PFERD TOOLS.
Replacement core SE DA 27 DIN10/G22
Pre-assembled replacement core for the direct connection (DA).
Needle scaler – spare needle set with 18 needles, length 127 mm
Spare needle set with 18 needles, length 127 mm, suitable for needle scalers.
Needle scaler – spare needle set with 19 needles, length 140 mm
Spare needle set with 19 needles, length 140 mm, suitable for needle scalers.
Needle scaler – spare needle set with 28 needles, length 140 mm
Spare needle set with 28 needles, length 140 mm, suitable for needle scalers.
High-performance milling disc ALUMASTER HSD-R dia. 125 mm RS for robot applications aluminium machining HICOAT coated
Special tool for processing aluminium alloys in robot applications.
TORUS CUTTER high-performance cutter dia. 20x60 mm for robots, aluminium machining
The High Speed Torus Cutter is an unparalleled tool for use on robots with an extremely high stock removal rate. Unlike grinding tools, the cutter does not generate hazardous or explosive dust, making it ideal for a variety of applications on aluminium materials. Thanks to its compact design, the High Speed Torus Cutter is the ideal tool for working in hard-to-reach areas and on delicate points such as grooves, pockets and tight radii and contours. The High Speed Torus Cutter is used with two tungsten carbide cutting inserts.
Accessory for TORUS CUTTER, TC cutting inserts dia. 10 mm for Torus Cutter HSC-T 20 RS8
In conjunction with innovative tool systems from PFERD TOOLS, the specially developed cutting inserts are characterized by a long tool life and optimal stock removal rate.
Tungsten carbide burr set 1500 cut 3 PLUS/Z5 22-piece dia. 16/12/10/8/6/3/2 mm shank dia. 6 mm universal medium fine
Set 1500 – cuts 3 PLUS and 5 – contains 22 tungsten carbide burrs in the most common shapes and dimensions for general applications. The sturdy plastic box protects the tools from dirt and damage.
Tungsten carbide high-performance burr set 1403 ALLROUND 3-piece dia. 3 mm shank dia. 3 mm universal coarse (1403)
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr set 1606 ALU 3-piece dia. 6 mm shank dia. 6 mm for aluminium/non-ferrous metals
PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr set 1606 ALU 3-piece dia. 6 mm shank dia. 6 mm HICOAT coated for aluminium/non-ferrous metals
The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
Tungsten carbide high-performance burr set 1906 INOX 3-piece dia. 6mm shank dia. 6 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr set 1906 INOX 3-piece dia. 6 mm shank dia. 6 mm HICOAT coated for stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide high-performance burr set 1306 MICRO 3-piece dia. 6 mm shank dia. 6 mm HICOAT coated for finishing
Tungsten carbide burrs with the MICRO cut with high-quality HICOAT coating HC-FEP are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a much higher stock removal rate than mounted/grinding points and impress with their high milled surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined. They also allow for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr set 1806 STEEL 3-piece dia. 6mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr set 1806 STEEL 3-piece dia. 6 mm shank dia. 6 mm HICOAT coated for steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr set 1712 TOUGH 5-piece dia. 12 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr ALLROUND flame B dia. 03x07 mm shank dia. 3 mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr ALLROUND flame B dia. 03x07 mm shank dia. 3 mm HICOAT coated for steel
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND conical pointed SKM dia. 03x07 mm shank dia. 3 mm HICOAT coated for steel
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND oval TRE dia. 03x07 mm shank dia. 3 mm HICOAT coated for steel
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND tree shape with radius end RBF dia. 03x07 mm shank dia. 3 mm HICOAT coated for steel
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm HICOAT universal
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm HICOAT coated for steel
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND pointed tree SPG dia. 03x07 mm shank dia. 3 mm HICOAT coated for steel
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND ball KUD dia. 03x02 mm shank dia. 3 mm HICOAT coated for steel
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND cylindrical ZYAS end cut dia. 03x13 mm shank dia. 3 mm HICOAT coated for steel
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr ALLROUND conical pointed SKM dia. 03x07mm shank dia. 3mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr ALLROUND oval TRE dia. 03x07 mm shank dia. 3 mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr ALLROUND tree shape with radius end RBF dia. 03x07mm shank dia. 3mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr ALLROUND conical shape with radius end KEL dia. 08x20 mm shank dia. 6 mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr ALLROUND cylindrical with radius end WRC dia. 03x13mm shank dia. 3mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr ALLROUND pointed tree SPG dia. 03x07mm shank dia. 3mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr ALLROUND ball KUD dia. 03x02 mm shank dia. 3 mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-performance burr ALLROUND cylindrical ZYAS end cut dia. 03x13mm shank dia. 3mm universal coarse
With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
Tungsten carbide high-perf. burr ALU tree shape with radius end RBF dia. 03x13 mm shank dia. 3 mm HICOAT for aluminium/non-ferrous metals
The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
Tungsten carbide high-performance burr ALU conical shape with radius end KEL dia. 12x30mm shank dia. 6mm for alu/non-ferrous metals HICOAT
The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
TC high-performance burr ALU cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm HICOAT coated for aluminium/non-ferrous metals
The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
Tungsten carbide high-performance burr ALU pointed tree SPG dia. 03x13 mm shank dia. 3 mm HICOAT coated for aluminium/non-ferrous metals
The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
Tungsten carbide high-performance burr ALU ball KUD dia. 03x02 mm shank dia. 3 mm HICOAT coated for aluminium/non-ferrous metals
The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
Tungsten carbide high-perf. burr ALU cylindrical ZYAS end cut dia. 03x13 mm shank dia. 3 mm HICOAT coated for aluminium/non-ferrous metals
The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
Tungsten carbide high-performance burr ALU tree shape with radius end RBF dia. 03x13mm shank dia. 3mm for aluminium/non-ferrous metals
PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr ALU conical shape with radius end KEL dia. 08x20mm shank dia. 6mm for aluminium/non-ferrous metals
PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr ALU cylindrical with radius end WRC dia. 03x13mm shank dia. 3mm for aluminium/non-ferrous metals
PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr ALU pointed tree SPG dia. 03x13mm shank dia. 3mm for aluminium/non-ferrous metals
PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr ALU ball KUD dia. 03x02mm shank dia. 3mm for aluminium/non-ferrous metals
PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr ALU cylindrical ZYAS end dia. 03x13 mm shank dia. 3 mm aluminium/non-ferrous metals
PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr CAST flame B dia. 12x30 mm shank dia. 6 mm for cast iron
With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
Tungsten carbide high-performance burr CAST conical pointed SKM dia. 12x25 mm shank dia. 6 mm for cast iron
With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
Tungsten carbide high-performance burr CAST oval TRE dia. 12x20 mm shank dia. 6 mm for cast iron
With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
Tungsten carbide high-performance burr CAST tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm for cast iron
With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
Tungsten carbide high-performance burr CAST conical shape with radius end KEL dia. 12x30 mm shank dia. 6 mm for cast iron
With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
Tungsten carbide high-performance burr CAST cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm for cast iron
With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
High-Performance Tungsten Carbide Burrs, CAST, Pointed Tree Shape SPG
High-performance CAST-cut tungsten carbide burr with pointed tree shape SPG, 6 mm diameter, 18 mm cutting length and 6 mm shank diameter. Designed especially for cast iron, with high stock removal and reduced vibration and noise.
High-performance tungsten carbide burrs, CAST, ball shape KUD
PFERD TOOLS tungsten carbide high-performance burr with CAST cut, ball shape KUD, 10 x 09 mm diameter, 6 mm shank, for cast iron.
Tungsten carbide high-performance burr CAST cylindrical ZYAS end cut dia. 06x16mm shank dia. 6mm for cast iron
With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
Tungsten carbide concave radius burr EDGE V dia. 16x12 mm shank dia. 6 mm work on edges
Tungsten carbide burrs with the EDGE cut have been especially developed for defined work on edges. The special design allows the burr to run directly along the edges without damaging the workpiece. In just one step, it is possible to achieve precise edge shapes. Among other things, rounding edges is a precautionary measure for anti-corrosion protection according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).
Tungsten carbide burr EDGE conical counterbore KSJ 30 ° dia. 16x05 mm shank dia. 6 mm work on edges
Tungsten carbide burrs with the EDGE cut have been especially developed for defined work on edges. The special design allows the burr to run directly along the edges without damaging the workpiece. In just one step, it is possible to achieve precise edge shapes. Among other things, rounding edges is a precautionary measure for anti-corrosion protection according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).
Tungsten carbide burr EDGE conical counterbore KSK 45 ° dia. 16x03 mm shank dia. 6 mm work on edges
Tungsten carbide burrs with the EDGE cut have been especially developed for defined work on edges. The special design allows the burr to run directly along the edges without damaging the workpiece. In just one step, it is possible to achieve precise edge shapes. Among other things, rounding edges is a precautionary measure for anti-corrosion protection according to: ISO 129443, ISO 85013, SOLAS XII/6.3 (Ref. T4/3.01 MSC.1/Circ.1198).
Tungsten carbide burr cylindrical ZYA dia. 06x25 mm shank dia. 6 mm FVK BS for plastics (GRP/CRP)
Tungsten carbide burrs with the FVK cut are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP). They are also suitable for general use on hard glass and carbon-fibre-reinforced duroplastics. Due to its high concentricity, the FVK cut is suitable for tool machines and manual applications. It is characterized by smooth milling and produces a smooth cut edge.
Tungsten carbide burr cylindrical ZYA dia. 06x25 mm shank dia. 6 mm FVKS BS for plastics (GRP/CRP)
Tungsten carbide burrs with the FVKS cut are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP). They are also suitable for general use on hard glass and carbon-fibre-reinforced duroplastics. Due to its high concentricity, the FVKS cut is suitable for tool machines and manual applications. It is characterized by smooth milling and produces a smooth cut edge. The FVKS cut is suitable for use on machines and robots with high feed rates.
Tungsten carbide high-performance burr INOX flame B dia. 08x20 mm shank dia. 6 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr INOX flame B dia. 10x25 mm shank dia. 6 mm HICOAT for stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX oval TRE dia. 10x16 mm shank dia. 6 mm HICOAT stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX tree shape with radius end RBF dia. 10x20 mm shank dia. 6 mm HICOAT stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm HICOAT stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX cylindrical with radius end WRC dia. 10x20 mm shank dia. 6 mm HICOAT stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX pointed tree SPG dia. 10x20 mm shank dia. 6 mm HICOAT stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX ball KUD dia. 10x09 mm shank dia. 6 mm HICOAT for stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX cylindrical ZYAS end cut dia. 12x25mm shank dia. 6mm HICOAT stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX cylindrical ZYA dia. 10x20 mm shank dia. 6 mm HICOAT stainless steel
High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr INOX oval TRE dia. 08x13 mm shank dia. 6 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr INOX tree shape with radius end RBF dia. 03x13 mm shank dia. 3 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr INOX conical shape with radius end KEL dia. 08x20 mm shank dia. 6 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr INOX cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr INOX pointed tree SPG dia. 03x07 mm shank dia. 3 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr INOX ball KUD dia. 03x02 mm shank dia. 3 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr INOX cylindrical ZYAS end cut dia. 03x13mm shank dia. 3mm stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr INOX cylindrical ZYA dia. 03x13 mm shank dia. 3 mm for stainless steel
With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
Tungsten carbide high-performance burr MICRO conical pointed SKM dia. 03x07 mm shank dia. 3 mm finishing
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide high-performance burr MICRO tree shape with radius end RBF dia. 03x07 mm shank dia. 3 mm finishing
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide high-performance burr MICRO cylindrical with radius end WRC dia. 02x10 mm shank dia. 3 mm finishing
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide high-performance burr MICRO pointed tree SPG dia. 03x07 mm shank dia. 3 mm finishing
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide high-performance burr MICRO ball KUD dia. 02x1.5 mm shank dia. 3 mm finishing
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide high-performance burr MICRO cylindrical ZYAS end dia. 06x16mm shank dia. 6mm finishing
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide high-performance burr MICRO cylindrical ZYA dia. 02x10 mm shank dia. 3 mm finishing
Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
Tungsten carbide high-performance burr NON-FERROUS conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm non-ferrous metals
PFERD TOOLS has developed the NON-FERROUS cut for general-purpose use on non-ferrous metals and fibre-reinforced plastics. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr NON-FERROUS cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm non-ferrous metals
PFERD TOOLS has developed the NON-FERROUS cut for general-purpose use on non-ferrous metals and fibre-reinforced plastics. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr NON-FERROUS ball KUD dia. 08x07 mm shank dia. 6 mm non-ferrous metals
PFERD TOOLS has developed the NON-FERROUS cut for general-purpose use on non-ferrous metals and fibre-reinforced plastics. This cut is characterized by its high stock removal rate.
Tungsten carbide high-performance burr NON-FERROUS cylindrical ZYA dia. 06x16 mm shank dia. 6 mm non-ferrous metals
PFERD TOOLS has developed the NON-FERROUS cut for general-purpose use on non-ferrous metals and fibre-reinforced plastics. This cut is characterized by its high stock removal rate.
Tungsten carbide radius burr R dia. 06x25 mm shank dia. 6 mm SP work on edges
Radius burrs with a concave shape and special cut. Suitable for the production and processing of outer radii and rounded edges.
Tungsten carbide high-performance burr PLAST BS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics
Tungsten carbide burrs with the PLAST cut are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP). They are particularly suitable for use on less hard glass and carbon-fibre-reinforced duroplastics (GRP and CRP ≤ 40 % fibre content) and fibre-reinforced thermoplastics. The PLAST cut (similar to PCD milling) minimizes delamination and fraying.
Tungsten carbide high-performance burr STEEL flame B dia. 08x20 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL flame B dia. 10x25 mm shank dia. 6 mm HICOAT for steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL conical pointed SKM dia. 10x20 mm shank dia. 6 mm HICOAT steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL oval TRE dia. 10x16 mm shank dia. 6 mm HICOAT for steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL tree shape with radius end RBF dia. 10x20 mm shank dia. 6 mm HICOAT for steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm HICOAT for steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 10x20 mm shank dia. 6 mm HICOAT steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL pointed tree SPG dia. 10x20 mm shank dia. 6 mm HICOAT steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL ball KUD dia. 10x09 mm shank dia. 6 mm HICOAT for steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL cylindrical ZYAS end cut dia. 10x20mm shank dia. 6mm HICOAT steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL cylindrical ZYA dia. 10x20 mm shank dia. 6 mm HICOAT for steel
High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
Tungsten carbide high-performance burr STEEL conical pointed SKM dia. 06x18 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL oval TRE dia. 08x13 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL tree shape with radius end RBF dia. 06x18 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL cylindrical with radius end WRC dia. 06x16 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL pointed tree SPG dia. 06x18 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL ball KUD dia. 06x05 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL cylindrical ZYAS end cut dia. 06x16mm shank dia. 6mm steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr STEEL cylindrical ZYA dia. 06x16 mm shank dia. 6 mm for steel
With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
Tungsten carbide high-performance burr tree shape with radius end RBF dia. 03x13 mm shank dia. 3 mm TITANIUM for titanium
The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.
Tungsten carbide high-performance burr cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm TITANIUM for titanium
The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.
Tungsten carbide high-performance burr pointed tree SPG dia. 03x13 mm shank dia. 3 mm TITANIUM for titanium
The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.
Tungsten carbide high-performance burr ball KUD dia. 03x02 mm shank dia. 3 mm TITANIUM for titanium
The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.
Tungsten carbide burr cylindrical ZYAS end cut 03x13mm shank dia. 3mm TITANIUM for titanium
The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.
Tungsten carbide high-performance burr TOUGH flame B dia. 08x20 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr TOUGH oval TRE dia. 10x16 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr TOUGH tree shape with radius end RBF dia. 08x20 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr TOUGH conical shape with radius end KEL dia. 12x25 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr TOUGH cylindrical with radius end WRC dia. 08x20 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr TOUGH-S tree shape with radius end RBF dia. 12x25 mm shank dia. 6 mm impact-resistant
The TOUGH-S cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH-S cut are characterized by smooth milling and high stock removal.
Tungsten carbide high-performance burr TOUGH-S cylindrical with radius end WRC dia. 12x25 mm shank dia. 6 mm impact-resistant
The TOUGH-S cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH-S cut are characterized by smooth milling and high stock removal.
Tungsten carbide high-performance burr TOUGH-S pointed tree SPG dia. 10x20 mm shank dia. 6 mm impact-resistant
The TOUGH-S cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH-S cut are characterized by smooth milling and high stock removal.
Tungsten carbide high-performance burr TOUGH-S cylindrical ZYA dia. 12x25 mm shank dia. 6 mm impact-resistant
The TOUGH-S cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH-S cut are characterized by smooth milling and high stock removal.
Tungsten carbide high-performance burr TOUGH pointed tree SPG dia. 10x20 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr TOUGH cylindrical ZYAS end dia. 08x20 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr TOUGH cylindrical ZYA dia. 08x20 mm shank dia. 6 mm impact-resistant
The TOUGH cut has been developed especially for tough applications in dockyards, foundries and steel construction. It is also ideal for use in all manufacturing sectors where, due to the difficult production environment, tooth breakages or other damage to conventional burrs is a frequent occurrence. Tungsten carbide burrs with the TOUGH cut are particularly aggressive and are characterized by high stock removal.
Tungsten carbide high-performance burr set 1406 ALLROUND 3-piece dia. 6 mm shank dia. 6 mm HICOAT coated universal coarse
High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
High-performance rechargeable battery RCK BAT with 50.4 V nominal voltage
High-performance rechargeable battery with 50.4 V nominal voltage.
Guard for surface grinding dia. 115 mm H45-125 FL-SV
PFERD TOOLS offers various guards for safe cutting (HT) and grinding (FL).
Guard for surface grinding dia. 125 mm H45-125 FL-SV
PFERD TOOLS offers various guards for safe cutting (HT) and grinding (FL).
precision needle file round 140mm Swiss cut 0, coarse
Ideal for working on very small surfaces, cut-outs, geometries, profiles and radii.
POLIFAN POWER flap disc PFC 115x22.23 mm conical Z40 Performance Line SG DURABLE STEEL for steel
The broad range Performance Line SG offers a high-performance tool solution for every application and every material. Performance Line SG tools achieve optimum results with maximum economic efficiency.
POLIFAN FORCE flap disc PFF 125x22.23 mm flat Z40 Special Line SGP STEEL for steel
Special Line SGP tools are specially developed for specific tasks and offer the user key advantages over conventional products. Furthermore, the Special Line SGP includes tools that offer ultimate economic efficiency thanks to their particularly high performance during use.
Bimetal hole saw set Co8/M42 8-piece for craftspeople
The set contains five HSS hole saws in the most common diameters, including accessories, for use in crafts. It is supplied in a well-arranged plastic box which protects against dirt and damage. Operating instructions are included. It is possible to use hole saws LS 32 and LS 38 with the LSA adapter and washer.
Waterproof sanding sponge 69x98x26 mm A100 four-sided for general use
Ideal for working on wood, paint and metal and for drywall construction in manual applications.
Waterproof sanding sponge set 69x98x26 mm A60,A100,A180 four-sided for general use
The sanding sponges are suitable for sanding down flat and irregular surfaces by hand. They are ideal for working on wood, paint and metal, drywall construction and for all types of small workpieces. The three-piece set can be used for coarse to fine grinding.
CHAIN SHARP MULTITOOL CS-MT chain saw sharpener dia. 4.0 mm for chain pitch 3/8" LowProfile
The PFERD TOOLS product range includes sharpeners for both manual and mechanical sharpening of saw chains. Sharpeners from PFERD TOOLS stand out due to their long tool life and ease of use.
Chainsaw sharpening set 4.0 mm 5/32" for chain pitch 1/4" and 3/8" Low Profile in plastic pouch
The CHAIN SHARP CS-SLS chain saw sharpener set consists of the CHAIN SHARP CS-SL sharpening gauge, a depth gauge file with ergonomic file handle for adjusting the depth gauge, a depth gauge for checking the depth gauge distance and two replacement chain saw files. The handy sharpening gauge combines a chain saw file and a gauge in one ergonomic tool. The defined elevation of the chain saw file makes sharpening the saw teeth easier and prevents the connecting links of the saw chain from being damaged. The gauge gives depth gauge distances of 0.65 mm (.025") for harder wood or 0.75 mm (.030") for softer wood.
CHISEL BIT FILE hand 175 mm cut 2 for sharpening edge grinding saw chains
Chain saw files by PFERD TOOLS are used around the world for sharpening saw chains. They can be used individually with a handle or in combination with depth gauge files with the popular CHAIN SHARP chain saw sharpeners.
CHISEL BIT FILE three square 175 mm cut 2 for sharpening edge grinding saw chains
Chain saw files by PFERD TOOLS are used around the world for sharpening saw chains. They can be used individually with a handle or in combination with depth gauge files with the popular CHAIN SHARP chain saw sharpeners.
Chain saw file round 200mm Classic Line
Chain saw files by PFERD TOOLS are used around the world for sharpening saw chains. They can be used individually with a handle or in combination with depth gauge files with the popular CHAIN SHARP chain saw sharpeners.
accessory chain saw gauge KSSL 25/30° for ergonomic file handle FH1
The PFERD TOOLS product range includes file handles in different versions and dimensions. From wooden handles for chain saw files to ergonomic file handles for machinist's files, sharpening files or rasps, to quick-mounting handles for needle files or precision files, PFERD TOOLS offers handles for a wide variety of files.
CHAIN SHARP grinding disc CS-G dia. 145x3.2 mm centre hole dia. 22.2 mm A60 for sharpening saw chains
The grinding discs for saw chains are exceptionally well-suited for mechanical sharpening of saw chains using chain sharpeners.