CBN grinding disc 20mm B151 (medium) for stationary internal grinding

Technical information

Dia. external

20 mm

Dia. hole

8 mm

Grit size

B 151

Width

10 mm

Width, centring shoulder

2 mm

Packaging unit

1 piece

Description

• Electroplated diamond and CBN grinding discs are used for both wet and dry grinding.
• CBN grinding discs are intended for use on stationary machines. They have an additional centring shoulder which allows them to be accurately mounted and aligned on the machine spindle. Combined with a stable mandrel, these tools are ideal for work in deep-set or long bores.

Recommendations for use

• Generally, the following applies: For optimum economic efficiency, select a grit size that is as coarse as possible and as fine as necessary. Influencing factors include the hardness of the material and the surface quality required.
• Loaded tools can be cleaned using ultrasound. In the event of strong contamination on the coating, please clean using the sharpening block DSB 2005025 (EAN 4007220168332).
• Select as large a tool diameter as possible, as this increases the amount of grit that engages the workpiece. For internal grinding, the maximum tool diameter is 3/4 of the diameter to be ground.
• The longitudinal feed rate for internal grinding must not exceed 2/3 of the total width per workpiece rotation. The infeed depends on the material to be machined, the cutting speed, the stability of the tool, its holder and the tool drive.
• Dry grinding: 15–25 m/s
• Wet grinding: 20-40 m/s

Ordering notes

• Customer-specific tool solutions are available on request.

Product identifiers

Product number

36722015

Family SKU

177419

EAN

4007220355015