PFERD TOOLS

INOX-TOTAL wheel brush knotted RBGIT dia. 70x6 mm shank dia. 6 mm stainless steel wire dia. 0.30

Name: INOX-TOTAL wheel brush knotted RBGIT dia. 70x6 mm shank dia. 6 mm stainless steel wire dia. 0.30
Brand: PFERD TOOLS
SKU: 43100252

Generally suitable for cleaning, deburring, and removal of heat discolouration.

Product number43100252

Family SKU184937

EAN4007220808504

Technical information

Generally suitable for cleaning, deburring, and removal of heat discolouration.
In addition to brushes with a stainless steel filament, PFERD TOOLS also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type. They are particularly well-suited to use in extremely critical environments.
In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310/1.4301 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD TOOLS brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310/1.4301 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.
Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Aggressive brushing effect due to the very stiff wire knots.
Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310/1.4301 (V2A).
Very good corrosion resistance.
The brush is degreased and does not leave any oil residue on the workpiece.

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.