Diamond grinding points set 10-piece shank dia. 3 mm D126 (medium)

Technical information

Dia. shank

3 mm

Grit size

D 126

Packaging unit

1 piece

Description

• The set contains ten diamond grinding points with grit size D 126 in the most common shapes and dimensions. The sturdy plastic box protects the tools against dirt and damage.

Recommendations for use

• Dry grinding: 8–18 m/s
• Wet grinding: 15–25 m/s
• Application is possible for both dry and wet grinding. If possible, wet grinding is to be preferred in order to reduce tool wear and the risk of thermal damage.
• Generally, the following applies: For optimum economic efficiency, select a grit size that is as coarse as possible and as fine as necessary. Influencing factors include the hardness of the material and the surface quality required.
• Loaded tools can be cleaned using ultrasound. In the event of strong contamination on the coating, please clean using the sharpening block DSB 2005025 (EAN 4007220168332).
• Select as large a tool diameter as possible, as this increases the amount of grit that engages the workpiece. For internal grinding, the maximum tool diameter is 3/4 of the diameter to be ground.
• The longitudinal feed rate for internal grinding must not exceed 2/3 of the total width per workpiece rotation. The infeed depends on the material to be machined, the cutting speed, the stability of the tool, its holder and the tool drive.

Ordering notes

• Customer-specific tool solutions are available on request.

Contents

• The diamond grinding point DZY-N 14,0-1,1/3 D 126 is only available in a set and not individually.

Product identifiers

Product number

36476067

Family SKU

196645

EAN

4007220103845