High-performance milling disc ALUMASTER dia. 49 mm for angle/straight grinders work on aluminium

Technical information

Dia. external

49 mm

Dia. hole

10 mm

RPM, soft non-ferrous metals

25000 RPM

Width

8 mm

Packaging unit

1 piece

Description

• The innovative High Speed Disc ALUMASTER is a unique tool with an extremely high stock removal rate. It is ideal for processing aluminium as it does not generate hazardous or explosive dust. The tool consists of specially developed tungsten carbide cutting inserts, which are fixed to the High Speed Disc.
• Special tool for processing aluminium alloys. Alongside angle grinders (mount dia. 10 mm), can also be used on straight grinders and flexible shafts by means of specially developed arbor. Very well-suited to processing hard-to-reach places and delicate components. A guard is not needed due to the tool diameter of 49 mm. HSD-R version for radial applications.

Special features

• Does not generate hazardous or explosive dust.
• An extraction system is not required.
• Alternative to grinding wheels and flap discs of comparable weight.
• Innovative, robust cut geometry for maximum safety, extreme durability and ease of work.
• Specially developed, turnable and replaceable tungsten carbide cutting inserts.
• Exceptionally high stock removal rate.

Recommendations for use

• The tool has primarily been designed for use on aluminium, wrought aluminium alloys and cast aluminium. Non-ferrous metals with a relatively low strength and fibre-reinforced plastics can also be machined. This must be checked for the specific application on a case-by-case basis.
• Do not push the tool deep into the workpiece. The milling disc is not a cutting tool.
• Do not exert unnecessarily high forces on the tool: The ALUMASTER High Speed Disc already works with low forces.
• When machining workpiece edges, cut along the edge, never across the edge.
• Do not decelerate the tool on the workpiece. The cutting inserts may break.

Safety notes

• It is essential to tighten the flange nut using the appropriate tool, such as a face pin wrench. Clamping systems which are designed to be tightened without the use of an additional tool, i.e. which are tightened by hand, are not permissible.
• Tighten the mounting bolts of the cutting inserts using the hexalobular socket key provided. If used properly, it is designed to provide a tightening torque of around 4 Nm. Alternatively, use a torque spanner with a tightening torque of 4 Nm.
• Loose cutting inserts may break during use. Therefore, check regularly whether they are attached securely.
• Do not use damaged cutting inserts! They may break!

Contents

• High Speed Disc ALUMASTER HSD-R 50 incl. pre-mounted tungsten carbide cutting inserts, hexalobular socket wrench and plastic box.

Product identifiers

Product number

22000025

Family SKU

198817

EAN

4007220156858