Tungsten carbide burr tree shape with radius end RBF dia. 12x25 mm shank dia. 6 mm Z1 universal coarse

Technical information

Cut

1

Dia. external

12 mm

Dia. shank

6 mm

Length, cut

25 mm

Length, total

65 mm

RPM, grey cast iron, white cast iron

16000 - 24000 RPM

RPM, rust and acid-resistant steels

7000 - 12000 RPM

RPM, soft non-ferrous metals

16000 - 24000 RPM

RPM, steels up to 1,200 N/mm²

16000 - 24000 RPM

Radius corner design

2.5 mm

Packaging unit

1 piece

Description

• Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Tree-shaped burr with radius end according to DIN 8032 with cut conforming to DIN 8033.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Product identifiers

Product number

21117816

Family SKU

174180

EAN

4007220047774