PFERD TOOLS

Tungsten carbide burr pointed tree SPG dia. 06x18 mm shank dia. 6 mm Z1 universal coarse

Name: Tungsten carbide burr pointed tree SPG dia. 06x18 mm shank dia. 6 mm Z1 universal coarse
Brand: PFERD TOOLS
SKU: 21122516

Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.

Product number21122516

Family SKU174177

EAN4007220047934

Technical information

Cut 1 is especially well-suited to machining of non-ferrous metals, steel and cast iron. It is characterized by its high stock removal rate.
Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
Pointed tree-shaped burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
Long tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
High surface quality.

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.