Tungsten carbide burr flame B dia. 08x20 mm shank dia. 6 mm Z3 universal medium

Technical information

Cut

3

Dia. external

8 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, grey cast iron, white cast iron

18000 - 24000 RPM

RPM, hard non-ferrous metals

10000 - 14000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

10000 - 14000 RPM

RPM, rust and acid-resistant steels

10000 - 14000 RPM

RPM, soft non-ferrous metals

18000 - 24000 RPM

Radius corner design

1.5 mm

Packaging unit

1 piece

Description

• Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Flame-shaped burr according to ISO 7755/8 with cut conforming to DIN 8033.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Product identifiers

Product number

21103106

Family SKU

174186

EAN

4007220046050