Tungsten carbide burr conical counterbore KSK 90 ° dia. 06x03 mm shank dia. 6 mm Z3 universal medium

Technical information

Angle

90 °

Cut

3

Dia. external

6 mm

Dia. shank

6 mm

Length, cut

3 mm

Length, total

50 mm

RPM, grey cast iron, white cast iron

24000 - 32000 RPM

RPM, hard non-ferrous metals

13000 - 19000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

13000 - 19000 RPM

RPM, rust and acid-resistant steels

13000 - 19000 RPM

RPM, soft non-ferrous metals

24000 - 32000 RPM

Packaging unit

1 piece

Description

• Cut 3 is especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate and achieves a good surface.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Conical counterbore burr according to DIN 8032 with cut conforming to DIN 8033, with angle (90°). Suitable for flexible counterboring and chamfering.
• Due to their special shapes, tungsten carbide burrs for flexible work on edges achieve almost precise chamfers or radii and can also be used flexibly in hard-to-reach areas. They are mainly used in steel and aluminium construction and have been specifically designed for chamfering, deburring and rounding of edges.
• This design is double-ended, which means that it can cut and be used on both sides.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Product identifiers

Product number

21115636

Family SKU

174194

EAN

4007220047569