Tungsten carbide burr tree shape with radius end RBF dia. 08x20mm shank dia. 6x150mm Z3P universal medium cross cut

Technical information

Cut

3 PLUS

Dia. external

8 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

170 mm

RPM, grey cast iron, white cast iron

11000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

11000 RPM

RPM, rust and acid-resistant steels

11000 RPM

RPM, soft non-ferrous metals

11000 RPM

RPM, steels up to 1,200 N/mm²

11000 RPM

Radius corner design

1.2 mm

Packaging unit

1 piece

Description

• Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Tree-shaped burr with radius end according to DIN 8032 with cut conforming to DIN 8033.
• Tungsten carbide burrs with a long shank are ideal for efficiently machining small, hard-to-reach areas of components. They can be shortened if required. This version has a long steel shank.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Recommendations for use

• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

• For safety reasons, the maximum rotational speeds with contact with the workpiece require a reduction in the recommended speed of tungsten carbide burrs with standard shanks. Observe the product information included.
• When working with long shank lengths, it is crucial that the tool is in contact with the workpiece (or inserted in the bore or slot to be machined) before the drive system is turned on. As a rule, the tool must remain in contact with the workpiece for as long as the machine is running. Failure to observe this procedure may result in burr failure (bending) and hence an increased risk of accidents. If continuous contact between the tool and the workpiece is not guaranteed during use, the maximum idling speeds must not be exceeded.
• Not suitable for robotic or stationary applications. Risk of bending. Use only rigid clamping systems/drives.

Product identifiers

Product number

21117627

Family SKU

174205

EAN

4007220617731