Tungsten carbide burr ball KUD dia. 1.5x1 mm shank dia. 3 mm Z3P universal medium cross cut

Technical information

Cut

3 PLUS

Dia. external

1.5 mm

Dia. shank

3 mm

Length, cut

1 mm

Length, total

33 mm

RPM, grey cast iron, white cast iron

95000 - 127000 RPM

RPM, hard non-ferrous metals

53000 - 74000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

53000 - 74000 RPM

RPM, rust and acid-resistant steels

53000 - 74000 RPM

RPM, soft non-ferrous metals

95000 - 127000 RPM

Packaging unit

1 piece

Description

• Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Ball-shaped burr according to DIN 8032 with cut conforming to DIN 8033.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Recommendations for use

• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Product identifiers

Product number

21211013

Family SKU

174199

EAN

4007220955444