Tungsten carbide burr cylindrical ZYAS end cut dia. 02x10mm shank dia. 3mm Z3P universal medium cross cut

Technical information

Cut

3 PLUS

Dia. external

2 mm

Dia. shank

3 mm

Length, cut

10 mm

Length, total

40 mm

RPM, grey cast iron, white cast iron

72000 - 96000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

40000 - 56000 RPM

RPM, high-temperature-resistant materials

40000 - 72000 RPM

RPM, rust and acid-resistant steels

40000 - 56000 RPM

RPM, steels up to 1,200 N/mm²

72000 - 95000 RPM

Packaging unit

1 piece

Description

• Cut 3 PLUS is cross cut and especially well-suited to machining of cast iron, steel, stainless steel (INOX), nickel-based alloys and titanium alloys. It is characterized by its high stock removal rate.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Cylindrical burr according to DIN 8032 with circumferential and end cut conforming to DIN 8033.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Recommendations for use

• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Product identifiers

Product number

21200183

Family SKU

174198

EAN

4007220049471