Tungsten carbide burr cylindrical ZYAS end cut dia. 02x10mm shank dia. 3mm Z4 universal medium fine

Technical information

Cut

4

Dia. external

2 mm

Dia. shank

3 mm

Length, cut

10 mm

Length, total

40 mm

RPM, hard non-ferrous metals

40000 - 56000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

40000 - 56000 RPM

RPM, high-temperature-resistant materials

40000 - 72000 RPM

RPM, rust and acid-resistant steels

40000 - 72000 RPM

Packaging unit

1 piece

Description

• Cut 4 is especially well-suited to machining of stainless steel (INOX), steel and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It is characterized by its high stock removal rate with short chips and achieves a good surface.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Cylindrical burr according to DIN 8032 with circumferential and end cut conforming to DIN 8033.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Recommendations for use

• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Product identifiers

Product number

21200143

Family SKU

177574

EAN

4007220049457