Tungsten carbide burr conical counterbore KSJ 60 ° dia. 16x13 mm shank dia. 6 mm Z5 universal fine

Technical information

Angle

60 °

Cut

5

Dia. external

16 mm

Dia. shank

6 mm

Length, cut

13 mm

Length, total

56 mm

RPM, hard non-ferrous metals

7000 - 9000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

7000 - 9000 RPM

RPM, high-temperature-resistant materials

7000 - 12000 RPM

RPM, rust and acid-resistant steels

7000 - 9000 RPM

RPM, steels up to 1,200 N/mm²

9000 - 12000 RPM

Packaging unit

1 piece

Description

• Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Conical counterbore burr according to DIN 8032 with cut conforming to DIN 8033, with point angle (60°). Suitable for flexible counterboring and chamfering.
• Due to their special shapes, tungsten carbide burrs for flexible work on edges achieve almost precise chamfers or radii and can also be used flexibly in hard-to-reach areas. They are mainly used in steel and aluminium construction and have been specifically designed for chamfering, deburring and rounding of edges.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Recommendations for use

• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Product identifiers

Product number

21115356

Family SKU

178346

EAN

4007220047507