Tungsten carbide burr pointed tree SPG dia. 03x07 mm shank dia. 3 mm Z5 universal fine

Technical information

Cut

5

Dia. external

3 mm

Dia. shank

3 mm

Length, cut

7 mm

Length, total

37 mm

RPM, hard non-ferrous metals

37000 - 48000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

37000 - 48000 RPM

RPM, high-temperature-resistant materials

37000 - 64000 RPM

RPM, rust and acid-resistant steels

37000 - 48000 RPM

RPM, steels up to 1,200 N/mm²

48000 - 64000 RPM

Packaging unit

1 piece

Description

• Cut 5 is especially well-suited to fine machining of cast iron, steel, stainless steel (INOX) and high-temperature-resistant materials such as nickel-based and cobalt-based alloys. It achieves a good surface.
• Tungsten carbide burrs for general applications are suitable for fine and coarse stock removal on the key materials used in industrial manufacturing. They provide a good stock removal rate and are not specific to a particular material.
• Pointed tree-shaped burr according to DIN 8032 with cut conforming to DIN 8033, flattened tip.

Special features

• Good stock removal rate through optimum matching of tungsten carbide, geometry, cut and available coating.
• Long tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
• High surface quality.

Recommendations for use

• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Product identifiers

Product number

21222553

Family SKU

177588

EAN

4007220049907