HSS rotary cutter conical pointed shape G dia. 10x20 mm shank dia. 6 mm Z 1 universal coarse

Technical information

Angle

28 °

Cut

1

Dia. external

10 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, rust and acid-resistant steels

2000 - 2600 RPM

RPM, soft non-ferrous metals

6400 - 9600 RPM

RPM, thermoplastics, reinforced (GRP/CRP) with a fibre content of less than 40%

6400 - 9600 RPM

Packaging unit

1 piece

Description

• Cut 1 is especially well suited for machining of stainless steel (INOX), soft non-ferrous metals and plastics. It is used in a rotational speed range of 1,200 to 23,900 RPM, depending on the burr diameter.
• Conical pointed burr, flattened tip.

Special features

• Highly aggressive.
• Can be used at low rotational speeds.
• Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
• When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
• In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Product identifiers

Product number

22423316

Family SKU

178821

EAN

4007220059234