HSS rotary cutter conical shape with radius end L dia. 10x20 mm shank dia. 6 mm Z 3 universal medium fine chip divider

Technical information

Angle

14 °

Cut

3

Dia. external

10 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, grey cast iron, white cast iron

2600 - 3200 RPM

RPM, steels up to 1,200 N/mm²

2600 - 3200 RPM

Radius corner design

2.9 mm

Packaging unit

1 piece

Description

• Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
• Conical burr with radius end.

Special features

• Highly aggressive.
• Can be used at low rotational speeds.
• Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
• When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
• In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.

Product identifiers

Product number

22450136

Family SKU

178837

EAN

4007220059579