Technical information
- Angle
- 20 °
- Cut
- 3
- Dia. external
- 12 mm
- Dia. shank
- 6 mm
- Length, cut
- 13 mm
- Length, total
- 53 mm
- RPM, grey cast iron, white cast iron
- 2200 - 2700 RPM
- RPM, steels up to 1,200 N/mm²
- 2200 - 2700 RPM
- Packaging unit
- 1 piece
PFERD TOOLS
HSS inverted cone end W-ST 12x13 mm shank dia. 6 mm Z 3 universal medium fine chip divider
Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
Product number22471236
Family SKU178839
EAN4007220059784
Description
- Cut 3 has chip dividers and is especially well-suited to machining of steel, cast steel and cast iron. It is used in a rotational speed range of 1,200 to 7,900 RPM, depending on the burr diameter.
- Inverted cone-shaped rotary cutter, tapered towards the shank, with end cut.
Special features
- Highly aggressive.
- Can be used at low rotational speeds.
- Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
- Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
- When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
- In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.
- If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
Product identifiers
- Product number
- 22471236
- Family SKU
- 178839
- EAN
- 4007220059784