HSS rotary cutter ALU cylindrical shape with end cut A-ST dia. 16x25 mm shank dia. 6 mm aluminium/non-ferrous

Technical information

Cut

ALU

Dia. external

16 mm

Dia. shank

6 mm

Length, cut

25 mm

Length, total

65 mm

RPM, soft non-ferrous metals

4000 - 6000 RPM

RPM, thermoplastics, reinforced (GRP/CRP) with a fibre content of less than 40%

4000 - 6000 RPM

Packaging unit

1 piece

Description

• The ALU cut is particularly well-suited for machining soft non-ferrous metals, brass, copper, aluminium alloys, plastics, fibre-reinforced plastics and rubber. HSS rotary cutters with the ALU cut can be used in a rotational speed range of 4,000 to 6,000 RPM depending on the rotary cutter diameter.
• Cylindrical burr with end cut.

Special features

• Highly aggressive.
• Can be used at low rotational speeds.
• Very robust tooth cutting edges due to the toughness of the high-speed steel (HSS).
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• Use HSS rotary cutters if your drive unit does not allow for high rotational speeds.
• When used on soft materials, HSS rotary cutters can be an economical alternative to tungsten carbide burrs.
• In contrast to tungsten carbide burrs, HSS rotary cutters need to be used with lower rotational speeds.

Product identifiers

Product number

22405916

Family SKU

178814

EAN

4007220801345