End brush with plastic protection knotted PBG dia. 19 mm shank dia. 6 mm stainless steel wire dia. 0.15

Technical information

Dia. cup

19 mm

Dia. external

19 mm

Dia. filament material

0.15 mm

Dia. shank

6 mm

Filament material

Stainless steel wire (INOX)

Length, filament

28 mm

Length, total

68 mm

Max. RPM

20000 RPM

Mounting system

Shank

Number, knots

6 pcs.

PFERD TOOLS type

PBG 1919/6 INOX 0,15

Packaging

Industrial packaging

RPM, optimum

8000 - 13000 RPM

Packaging unit

10 pieces

Description

• Aggressive brush. Suitable for medium-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter.
• End brush with plastic-covered brush body.
• In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310/1.4301 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD TOOLS brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310/1.4301 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.
• Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Special features

• Optimal access to hard-to-reach areas such as recesses and drilled holes.
• The plastic covering prevents the risk of corrosion.
• Aggressive brushing effect due to the very stiff wire knots.
• Very good corrosion resistance.
• The brush is degreased and does not leave any oil residue on the workpiece.

Recommendations for use

• Please observe the recommended rotational speeds.
• Use speed-adjustable tool drives to control the spread of the brush.
• For the best results, use a tool drive with a minimum output of 500 watts.

Safety notes

• When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Product identifiers

Product number

43207011

Family SKU

184871

EAN

4007220598078