COMPOSITE composite disc brush DBUR dia. 50 mm shank dia. 6 mm ceramic filament dia. 1.10 mm grit 120 stationary

Technical information

Dia. external

50 mm

Dia. filament material

1.1 mm

Dia. shank

6 mm

Filament material

Ceramic oxide grain (CO)

Grit size

120

Length, filament

38 mm

Length, filament to ring

19 mm

Length, total

80 mm

Max. RPM

5000 RPM

Mounting system

Shank

RPM, optimum

1500 - 3500 RPM

Packaging unit

1 piece

Description

• Particularly aggressive brush with bridle. Particularly suitable for deburring and work on surfaces on stationary machines.
• Composite brushes from PFERD TOOLS have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times. For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected.
• Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness. For high stock removal values and aggressive brushing behaviour.
• Plastic filament withstands temperatures up to 220 °C.

Special features

• Long tool life and aggressive brushing effect due to a very high filament density.
• Extremely smooth operation due to even distribution of the filament material.
• If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour.
• The bridle enables the spreading out and flexibility of the brush filament to be controlled.
• The bridle prevents the wires spreading out sideways.
• Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
• For particularly aggressive machining and for giving the workpiece a high surface quality.

Recommendations for use

• Please observe the recommended rotational speeds.
• Remove the bridle once the filament is worn down. Then the rest of the filament can be used.
• Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas.
• The CO filament material is suitable for particularly aggressive machining and for giving the workpiece a high surface quality.
• Use coolant for applications where large amounts of heat are produced.

Safety notes

• When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Product identifiers

Product number

43400045

Family SKU

184869

EAN

4007220104699