COMPOSITE FLEX composite disc brush DBU dia. 100x22.2 mm hole SiC filament dia. 1.14 mm grit 80 stationary

Technical information

Dia. external

100 mm

Dia. filament material

1.14 mm

Dia. hole

22.2 mm

Filament material

Silicon carbide (SiC)

Grit size

80

Length, filament

38 mm

Max. RPM

3500 RPM

Mounting system

Centre hole

RPM, optimum

1400 - 2300 RPM

Packaging unit

1 piece

Description

• Particularly flexible brush. Particularly suitable for deburring and work on surfaces on stationary machines.
• Composite brushes from PFERD TOOLS have been specifically developed for industrial, automated use. They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems. This offers the advantage that the workpiece can be produced and finished on the same machine. As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times. For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected.
• Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement. Rectangular filament [REC] is suited to applications that place particular demands on the aggressiveness of the brush. The larger cross-section of the filaments means that these are more stiff than round filaments and provide a greater contact area with the workpiece.
• Plastic filament withstands temperatures up to 220 °C.

Special features

• Long tool life and aggressive brushing effect due to a very high filament density.
• Extremely smooth operation due to even distribution of the filament material.
• Special arrangement of the filament enables optimal adjustment to the workpiece contour, less heat build-up and more efficient use of the coolant.
• Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
• For aggressive work thanks to rectangular filament (REC).

Recommendations for use

• Please observe the recommended rotational speeds.
• Use coolant for applications where large amounts of heat are produced.

Ordering notes

• This composite disc brush is supplied with two drive pin holes with a 6.5 mm diameter. Pitch circle diameter 31 mm.

Product identifiers

Product number

79183968

Family SKU

184866

EAN

4007220033715