PFERD TOOLS

INOX-TOTAL bevel brush crimped KBUIT dia. 50x10 mm shank dia. 6 mm stainless steel wire dia. 0.20

Name: INOX-TOTAL bevel brush crimped KBUIT dia. 50x10 mm shank dia. 6 mm stainless steel wire dia. 0.20
Brand: PFERD TOOLS
SKU: 43225017

Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration.

Product number43225017

Family SKU184845

EAN4007220936474

Technical information

Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration.
In addition to brushes with a stainless steel filament, PFERD TOOLS also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type. They are particularly well-suited to use in extremely critical environments.
In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD TOOLS uses wire quality 1.4310/1.4301 (V2A) for all INOX brushes. Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life. All PFERD TOOLS brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A. The wire quality 1.4310/1.4301 tends to become ferromagnetic in the case of cold working; i.e. it can be attracted using magnets. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.
Stainless steel wire (INOX) withstands temperatures up to 450 °C.

Optimal access to hard-to-reach areas such as inner edges, grooves and keyways.
Highly flexible, enabling optimal adjustment to the workpiece contour.
Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310/1.4301 (V2A).
Very good corrosion resistance.
Creates fine surfaces.
The brush is degreased and does not leave any oil residue on the workpiece.

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.