Technical information
- Abrasive
- Aluminium oxide A
- Dia. external
- 10 mm
- Dia. shank
- 3 mm
- Grit size
- G (coarse)
- Length, shank
- 30
- Max. RPM
- 38100 RPM
- RPM, optimum
- 28600 RPM
- Shape
- KE
- Version
- H (hard)
- Width
- 25 mm
- Packaging unit
- 10 pieces
PFERD TOOLS
POLINOX pressed non-woven grinding point conical shape PNER dia. 10x25 mm shank dia. 3 mm hard A coarse for finishing
POLINOX grinding points PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain and the appropriate bond result in non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing.
Product number47700293
Family SKU238545
EAN4007220791820
Description
- POLINOX grinding points PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The different combinations of compression, fibres, grain and the appropriate bond result in non-woven products that offer a very good surface finish, high stock removal rate and long tool life. These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing.
- The version for straight grinders is particularly suitable for working on fillet welds and hard-to-reach contours or indentations.
- Multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system. The aluminium oxide A version is ideal for general-purpose applications on steel and non-ferrous metals.
- The conical shape KE is designed for a comfortable working position during surface grinding and grinding of chamfers.
Special features
- Particularly suitable for hard-to-reach indentations and contours.
- High economic efficiency due to high abrasive performance and long tool life.
- Produces very good surface quality.
- Can be profiled as desired, enabling optimal adjustment to the contour.
Recommendations for use
- For the best results, use at a recommended cutting speed of 10-20 m/s. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
- Considerably reduce cutting speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.
Safety notes
- For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Product identifiers
- Product number
- 47700293
- Family SKU
- 238545
- EAN
- 4007220791820