Tungsten carbide profile cylinder burr PZF dia. 04x22x60 shank dia. 6 mm for locksmiths, police and fire service

Technical information

Cut

PZF MICRO

Dia. external

4 mm

Dia. shank

6 mm

Length, cut

22 mm

Length, total

60 mm

RPM, grey cast iron, white cast iron

14000 - 28000 RPM

RPM, hard non-ferrous metals

14000 - 28000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

14000 - 28000 RPM

RPM, rust and acid-resistant steels

14000 - 28000 RPM

RPM, soft non-ferrous metals

14000 - 28000 RPM

RPM, steels up to 1,200 N/mm²

14000 - 28000 RPM

Packaging unit

1 piece

Description

• The profile cylinder burr PZF for locksmiths from PFERD TOOLS is a cylindrical burr with drill tip and cut cutting surfaces, which was developed specially for time-saving milling of locked profile cylinders with pull protection. The integrated drill tip enables accurate centring, meaning that the profile cylinder can be milled precisely. Thanks to the cut on the external surface and the twisted grooves, optimum chip removal is ensured. Tool jamming is therefore minimized and the risk of breakage is reduced. Furthermore, the innovative milling tool from PFERD TOOLS impresses with its good tool life, despite the challenging application.
• Using conventional burrs takes several minutes to open a profile cylinder of a security lock. Thanks to its extremely high stock removal rate, PFERD TOOLS’ innovative solution usually enables you to complete this task in under one minute – depending on the lock.
• The MICRO version is particularly well suited to milling out high-quality cylinder locks with hardened components up to 68 HRC.

Special features

• Enormous time savings thanks to very high stock removal rate.
• High-precision drilling thanks to centring point.
• Less susceptible to breakage, as tool jamming is minimized.
• Optimum chip removal.
• Easy to use.
• Good tool life.
• Suitable for use on steel and stainless steel (INOX).

Recommendations for use

• Use the burrs on powerful straight grinders that are, insofar as possible, speed-adjustable.
• The optimum rotational speed and power output for the tool drive are required for cost-­effective use of the burr. Recommended rotational speed range: 14,000–28,000 RPM.
• Use the strike plate burr SBF from PFERD TOOLS in order to remove facings or security covers in front of the profile cylinder.

Product identifiers

Product number

26007712

Family SKU

224719

EAN

4007220420089