Tungsten carbide copy milling burr 7 mm MICRO cylindrical ZYA dia. 03x25 mm shank dia. 3 mm finishing

Technical information

Cut

MICRO

Dia. external

3 mm

Dia. shank

3 mm

Length, construction

7 mm

Length, cut

25 mm

Length, total

65 mm

RPM, grey cast iron, white cast iron

64000 - 80000 RPM

RPM, hard non-ferrous metals

48000 - 64000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

48000 - 64000 RPM

RPM, high-temperature-resistant materials

48000 - 64000 RPM

RPM, rust and acid-resistant steels

48000 - 64000 RPM

RPM, steels up to 1,200 N/mm²

64000 - 80000 RPM

Packaging unit

1 piece

Description

• Tungsten carbide copy milling burrs by PFERD TOOLS are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould-making.
• Tungsten carbide copy milling burrs with MICRO cut were designed especially for fine stock removal, and produce a high surface quality. Almost all materials up to a hardness of 68 HRC can be machined.
• Cylindrical burr.

Special features

• Long tool life and high surface quality.
• The uncut area provides optimum contour guidance and protects the workpiece against damage.
• Reduced machining time.

Recommendations for use

• For accurate contour guidance, copy milling burrs can be used with guide aids.
• Observe the recommended rotational speeds.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Product identifiers

Product number

21201288

Family SKU

196907

EAN

4007220244838