Tungsten carbide copy milling burr 7 mm MICRO inverted cone WKN dia. 08x26 mm shank dia. 6 mm finishing

Technical information

Angle

4 °

Cut

MICRO

Dia. external

8 mm

Dia. shank

6 mm

Length, construction

7 mm

Length, cut

26 mm

Length, total

73 mm

RPM, grey cast iron, white cast iron

24000 - 30000 RPM

RPM, hard non-ferrous metals

18000 - 24000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

18000 - 24000 RPM

RPM, high-temperature-resistant materials

18000 - 24000 RPM

RPM, rust and acid-resistant steels

18000 - 24000 RPM

RPM, steels up to 1,200 N/mm²

24000 - 30000 RPM

Packaging unit

1 piece

Description

• Tungsten carbide copy milling burrs by PFERD TOOLS are the perfect tools for levelling elevations, such as weld seams. Thanks to the uncut area, the weld seam can be adjusted to the level of the surrounding surface without this being damaged. Copy milling burrs are used in particular in the repair of cutting and punching blades in tool and mould-making.
• Tungsten carbide copy milling burrs with MICRO cut were designed especially for fine stock removal, and produce a high surface quality. Almost all materials up to a hardness of 68 HRC can be machined.
• Inverted cone-shaped rotary cutter, tapered towards the shank. Inverted cones WKN are especially well-suited to processing punching tools that are used for processing aluminium.

Special features

• Long tool life and high surface quality.
• The uncut area provides optimum contour guidance and protects the workpiece against damage.
• Reduced machining time.

Recommendations for use

• For accurate contour guidance, copy milling burrs can be used with guide aids.
• Observe the recommended rotational speeds.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Product identifiers

Product number

21155008

Family SKU

196908

EAN

4007220244937