Tungsten carbide small high-performance burr set 1303 MICRO 3-piece dia. 3 mm shank dia. 3 mm finishing

Technical information

Contents shank diameter

3

Cut

MICRO

Dia. shank

3 mm

Number, content

3 pcs.

PFERD TOOLS type

1303 MICRO 3TLG

Packaging unit

1 piece

Description

• Tungsten carbide burrs with the MICRO cut are specially designed for fine stock removal and are used in areas in which mounted/grinding points are used, for example. They offer a higher stock removal rate than mounted/grinding points and impress with their high surface quality. They also operate with low vibration and little noise. They maintain their geometry over their entire tool life, and are well-suited to manual and machine applications. Almost all materials up to a hardness of 68 HRC can be machined.
• The 1303 MICRO set contains three tungsten carbide burrs for finishing work in the most common shapes and dimensions. The sturdy plastic box protects the tools from dirt and damage.

Special features

• High surface quality.
• Unlike with mounted grinding points, there is no change in geometry due to wear and tear.
• Use on almost all materials up to 68 HRC.
• The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.

Recommendations for use

• Particularly well suited to finishing, for very fine cleaning work, corrections in tool and mould construction or for sharpening cutting tools.
• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.

Product identifiers

Product number

21901303

Family SKU

196532

EAN

4007220226667