Tungsten carbide high-performance burr ALLROUND oval TRE dia. 03x07 mm shank dia. 3 mm HICOAT coated for steel

Technical information

Cut

ALLROUND HC-FEP

Dia. external

3 mm

Dia. shank

3 mm

Length, cut

7 mm

Length, total

37 mm

RPM, grey cast iron, white cast iron

48000 - 117000 RPM

RPM, hard non-ferrous metals

48000 - 80000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

27000 - 64000 RPM

RPM, rust and acid-resistant steels

48000 - 80000 RPM

RPM, soft non-ferrous metals

48000 - 95000 RPM

RPM, steels up to 1,200 N/mm²

48000 - 95000 RPM

Radius corner design

1.2 mm

Packaging unit

1 piece

Description

• High-performance cut ALLROUND with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
• Oval burr according to DIN 8032.

Special features

• Significantly better stock removal rate than burrs with a conventional cross cut.
• Saves time and money thanks to its very high stock removal rate on key materials.
• Comfortable working with reduced vibration and less noise.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Safety notes

• The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Product identifiers

Product number

21001105

Family SKU

178467

EAN

4007220784969