Tungsten carbide high-performance burr ALLROUND conical shape with radius end KEL dia. 08x20 mm shank dia. 6 mm universal coarse

Technical information

Angle

16 °

Cut

ALLROUND

Dia. external

8 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, grey cast iron, white cast iron

18000 - 36000 RPM

RPM, hard non-ferrous metals

18000 - 24000 RPM

RPM, hardened, heat-treated steels over 1,200 N/mm²

10000 - 18000 RPM

RPM, rust and acid-resistant steels

18000 - 24000 RPM

RPM, soft non-ferrous metals

18000 - 30000 RPM

RPM, steels up to 1,200 N/mm²

18000 - 30000 RPM

Radius corner design

1.25 mm

Packaging unit

1 piece

Description

• With the innovative ALLROUND cut, PFERD TOOLS has developed unique burrs for versatile use on key materials such as steel and cast steel, stainless steel (INOX), non-ferrous metals and cast iron. The ALLROUND cut offers all the benefits of the tried-and-tested 3 PLUS cut, but its stock removal rate is up to 30 % higher for steel. It enables comfortable working with reduced vibration and less noise. The ALLROUND cut also helps users save considerable time when working, thus making it an economically efficient option.
• Conical burr with round radius end according to DIN 8032.

Special features

• Significantly better stock removal rate than burrs with a conventional cross cut.
• Saves time and money thanks to its very high stock removal rate on key materials.
• Comfortable working thanks to reduced vibration and less noise.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

• The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Product identifiers

Product number

21001025

Family SKU

178395

EAN

4007220093481