TC high-performance burr ALU cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm HICOAT coated for aluminium/non-ferrous metals

Technical information

Cut

ALU HC-NFE

Dia. external

3 mm

Dia. shank

3 mm

Length, cut

13 mm

Length, total

43 mm

RPM, hard non-ferrous metals

64000 - 117000 RPM

RPM, soft non-ferrous metals

64000 - 117000 RPM

RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP)

64000 - 117000 RPM

Packaging unit

1 piece

Description

• The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.
• Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

Special features

• Mainly used for long-chipping and lubricating non-ferrous metals.
• Maximum stock removal rate.
• Effective chip removal through improved anti-adhesion characteristics.
• Lower thermal loads.
• Increased tool life.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Product identifiers

Product number

21205196

Family SKU

178430

EAN

4007220783382