Tungsten carbide high-performance burr ALU tree shape with radius end RBF dia. 03x13mm shank dia. 3mm for aluminium/non-ferrous metals

Technical information

Cut

ALU

Dia. external

3 mm

Dia. shank

3 mm

Length, cut

13 mm

Length, total

43 mm

RPM, hard non-ferrous metals

64000 - 117000 RPM

RPM, soft non-ferrous metals

64000 - 117000 RPM

RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP)

64000 - 117000 RPM

Radius corner design

0.75 mm

Packaging unit

1 piece

Description

• PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
• Tree-shaped burr with radius end according to DIN 8032.

Special features

• Extremely high stock removal rate.
• Large chips.
• Reduced material adhesion.
• Long tool life and smooth running.
• Can be used with cutting speeds of up to 1,100 m/min.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Product identifiers

Product number

21218135

Family SKU

178406

EAN

4007220803677