Tungsten carbide high-performance burr ALU conical shape with radius end KEL dia. 08x20mm shank dia. 6mm for aluminium/non-ferrous metals

Technical information

Angle

16 °

Cut

ALU

Dia. external

8 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, hard non-ferrous metals

24000 - 44000 RPM

RPM, soft non-ferrous metals

24000 - 44000 RPM

RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP)

24000 - 44000 RPM

Radius corner design

1.25 mm

Packaging unit

1 piece

Description

• PFERD TOOLS has further developed the ALU cut especially for stock removal on aluminium. This cut is characterized by its high stock removal rate.
• Conical burr with round radius end according to DIN 8032.

Special features

• Extremely high stock removal rate.
• Large chips.
• Reduced material adhesion.
• Long tool life and smooth running.
• Can be used with cutting speeds of up to 1,100 m/min.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Product identifiers

Product number

21124988

Family SKU

178405

EAN

4007220953013