Tungsten carbide high-performance burr CAST conical pointed SKM dia. 12x25 mm shank dia. 6 mm for cast iron

Technical information

Angle

26 °

Cut

CAST

Dia. external

12 mm

Dia. shank

6 mm

Length, cut

25 mm

Length, total

65 mm

RPM, grey cast iron, white cast iron

12000 - 20000 RPM

Packaging unit

1 piece

Description

• With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
• Conical pointed burr according to DIN 8032, flattened tip.

Special features

• Up to 100 % higher stock removal rate when used on cast iron due to the innovative tooth geometry, when compared with conventional cross-cut burrs.
• Tangibly more aggressive, large chips and very good chip removal.
• Comfortable working with reduced vibration and less noise.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

• The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Product identifiers

Product number

21115283

Family SKU

178366

EAN

4007220952481