Technical information
- Cut
- CAST
- Dia. external
- 6 mm
- Dia. shank
- 6 mm
- Length, cut
- 16 mm
- Length, total
- 55 mm
- RPM, grey cast iron, white cast iron
- 24000 - 40000 RPM
- Packaging unit
- 1 piece
PFERD TOOLS
Tungsten carbide high-performance burr CAST cylindrical ZYAS end cut dia. 06x16mm shank dia. 6mm for cast iron
With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
Product number21100283
Family SKU178360
EAN4007220952658
Description
- With the CAST cut, PFERD TOOLS has developed innovative burrs especially for work on cast iron. They are characterized by an extremely high stock removal rate on cast iron and impress through smooth milling with significantly reduced vibration and less noise.
- Cylindrical burr according to DIN 8032 with circumferential and end cut.
Special features
- Up to 100 % higher stock removal rate when used on cast iron due to the innovative tooth geometry, when compared with conventional cross-cut burrs.
- Tangibly more aggressive, large chips and very good chip removal.
- Comfortable working with reduced vibration and less noise.
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
- To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
- Observe the recommended rotational speeds.
- To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.
Safety notes
- The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
Product identifiers
- Product number
- 21100283
- Family SKU
- 178360
- EAN
- 4007220952658