Tungsten carbide burr cylindrical ZYA dia. 06x25 mm shank dia. 6 mm FVKS BS for plastics (GRP/CRP)

Technical information

Cut

FVKS

Dia. external

6 mm

Dia. shank

6 mm

Length, cut

25 mm

Length, total

65 mm

RPM, thermoplastics, reinforced (GRP/CRP) with a fibre content over 40%

24000 - 48000 RPM

Version

BS

Packaging unit

1 piece

Description

• Tungsten carbide burrs with the FVKS cut are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP). They are also suitable for general use on hard glass and carbon-fibre-reinforced duroplastics. Due to its high concentricity, the FVKS cut is suitable for tool machines and manual applications. It is characterized by smooth milling and produces a smooth cut edge. The FVKS cut is suitable for use on machines and robots with high feed rates.
• Cylindrical burr with drill cut.
• Burrs with a drill cut (BS) allow combined drilling and milling work.

Special features

• Particularly well suited to GRP and CRP, also with > 40 % fibre content.
• Creates smooth edges and is characterized by smooth milling action.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• Select a burr diameter greater than the thickness of the material to be machined, to avoid impacts and chattering with the risk of damaging or breaking the tool.
• Increase the rotational speed if the tool tends to chatter.
• If necessary, reduce the rotational speed and contact pressure if melting occurs.
• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• Burrs with a drill cut (BS) are particularly well-suited for machine and robot applications.

Product identifiers

Product number

21458697

Family SKU

178444

EAN

4007220808900