Tungsten carbide high-performance burr INOX conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm HICOAT stainless steel

Technical information

Angle

14 °

Cut

INOX HC-STS

Dia. external

10 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, hard non-ferrous metals

8000 - 19000 RPM

RPM, rust and acid-resistant steels

14000 - 24000 RPM

RPM, soft non-ferrous metals

8000 - 19000 RPM

Radius corner design

2.9 mm

Packaging unit

1 piece

Description

• High-performance cut INOX with HICOAT coating HC-STS is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
• Conical burr with round radius end according to DIN 8032.

Special features

• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

• The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Product identifiers

Product number

21125081

Family SKU

178386

EAN

4007220222454