Tungsten carbide high-performance burr INOX cylindrical with radius end WRC dia. 03x13 mm shank dia. 3 mm for stainless steel

Technical information

Cut

INOX

Dia. external

3 mm

Dia. shank

3 mm

Length, cut

13 mm

Length, total

43 mm

RPM, hard non-ferrous metals

27000 - 48000 RPM

RPM, rust and acid-resistant steels

48000 - 64000 RPM

RPM, soft non-ferrous metals

27000 - 48000 RPM

Packaging unit

1 piece

Description

• With the INOX cut, PFERD TOOLS has developed innovative burrs for work on stainless steel (INOX). The INOX cut is characterized by an extremely high stock removal rate on all austenitic steels, as well as rust- and acid-resistant steels. It generates significantly less vibration than a comparable cross cut.
• Cylindrical burr with radius end according to DIN 8032. Combination of cylindrical and ball-shaped geometries.

Special features

• Excellent stock removal rate and tool life due to innovative tooth geometry.
• Achieves high surface qualities through optimum chip formation.
• Prevents heat discolouration in the material due to reduced heat production.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.

Safety notes

• The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Product identifiers

Product number

21205182

Family SKU

178353

EAN

4007220930410