Tungsten carbide high-performance burr NON-FERROUS conical shape with radius end KEL dia. 10x20 mm shank dia. 6 mm non-ferrous metals

Technical information

Angle

14 °

Cut

NON-FERROUS

Dia. external

10 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, hard non-ferrous metals

19000 - 29000 RPM

RPM, soft non-ferrous metals

14000 - 19000 RPM

RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP)

19000 - 35000 RPM

Radius corner design

2.9 mm

Packaging unit

1 piece

Description

• PFERD TOOLS has developed the NON-FERROUS cut for general-purpose use on non-ferrous metals and fibre-reinforced plastics. This cut is characterized by its high stock removal rate.
• Conical burr with round radius end according to DIN 8032.

Special features

• Very good stock removal rate when used on non-ferrous metals such as brass and copper, plastics and fibre-reinforced plastics.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Product identifiers

Product number

21125096

Family SKU

178457

EAN

4007220221105