Tungsten carbide high-performance burr PLAST BS cylindrical ZYA dia. 06x25mm shank dia. 6mm for plastics

Technical information

Cut

PLAST

Dia. external

6 mm

Dia. shank

6 mm

Length, cut

25 mm

Length, total

65 mm

Version

BS

Packaging unit

1 piece

Description

• Tungsten carbide burrs with the PLAST cut are suitable for trimming and contour milling on a wide range of fibre-reinforced plastics (GRP/CRP). They are particularly suitable for use on less hard glass and carbon-fibre-reinforced duroplastics (GRP and CRP ≤ 40 % fibre content) and fibre-reinforced thermoplastics. The PLAST cut (similar to PCD milling) minimizes delamination and fraying.
• Cylindrical burr with drill cut.
• Burrs with a drill cut (BS) allow combined drilling and milling work.

Special features

• Particularly suitable for GRP and CRP ≤ 40 % fibre content.
• Minimized delamination and fraying due to the special cut that is similar to PCD mills.
• Particularly suitable for use on machines and on robots.
• Very low cutting force.
• High feed rates.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• Select a burr diameter greater than the thickness of the material to be machined, to avoid impacts and chattering with the risk of damaging or breaking the tool.
• Increase the rotational speed if the tool tends to chatter.
• If necessary, reduce the rotational speed and contact pressure if melting occurs.
• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• Burrs with a drill cut (BS) are particularly well-suited for machine and robot applications.

Product identifiers

Product number

21455696

Family SKU

178416

EAN

4007220900413