Tungsten carbide high-performance burr STEEL flame B dia. 08x20 mm shank dia. 6 mm for steel

Technical information

Cut

STEEL

Dia. external

8 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, hardened, heat-treated steels over 1,200 N/mm²

18000 - 30000 RPM

RPM, steels up to 1,200 N/mm²

18000 - 30000 RPM

Radius corner design

1.5 mm

Packaging unit

1 piece

Description

• With the innovative STEEL cut, PFERD TOOLS has developed unique burrs for working with steel and cast steel. They feature tangibly increased aggressiveness and good guidance. They thus ensure safe and precise work. Thanks to their extremely high stock removal rate, burrs with the STEEL cut help users save considerable time when working, thus making them an economically efficient option.
• Flame-shaped burr according to ISO 7755/8.

Special features

• Up to 50 % higher stock removal rate when used on steel and cast steel in comparison to conventional cross-cut burrs.
• Tangibly more aggressive, large chips and very good chip removal through the innovative tooth geometry.
• Workpieces are protected through significantly lower thermal load.
• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
• Observe the recommended rotational speeds.
• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

• The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Product identifiers

Product number

21103187

Family SKU

178438

EAN

4007220936719