Tungsten carbide high-performance burr STEEL conical pointed SKM dia. 10x20 mm shank dia. 6 mm HICOAT steel

Technical information

Angle

28 °

Cut

STEEL HC-FEP

Dia. external

10 mm

Dia. shank

6 mm

Length, cut

20 mm

Length, total

60 mm

RPM, hardened, heat-treated steels over 1,200 N/mm²

14000 - 29000 RPM

RPM, steels up to 1,200 N/mm²

14000 - 29000 RPM

Packaging unit

1 piece

Description

• High-performance cut STEEL with HICOAT coating HC-FEP is characterized by its high degree of hardness and wear resistance. It enables effective chip removal through improved anti-adhesion characteristics and is highly temperature-resistant. It allows for a longer tool life and use at higher cutting speeds in comparison with uncoated burrs.
• Conical pointed burr according to DIN 8032, flattened tip.

Special features

• The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

• If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
• To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Safety notes

• The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.

Product identifiers

Product number

21115190

Family SKU

178424

EAN

4007220221747