Technical information
- Cut
- TITANIUM
- Dia. external
- 3 mm
- Dia. shank
- 3 mm
- Length, cut
- 13 mm
- Length, total
- 43 mm
- RPM, hard non-ferrous metals
- 27000 - 48000 RPM
- Radius corner design
- 0.75 mm
- Packaging unit
- 1 piece
PFERD TOOLS
Tungsten carbide high-performance burr tree shape with radius end RBF dia. 03x13 mm shank dia. 3 mm TITANIUM for titanium
The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.
Product number21218184
Family SKU178412
EAN4007220034354
Description
- The TITANIUM cut has been especially developed for work on hard titanium materials (tensile strength > 500 N/mm²). It is characterized by an extremely high stock removal rate on this material group, which has very challenging stock removal properties. Tungsten carbide burrs with the TITANIUM cut impress with their smooth milling with considerably reduced vibration and less noise.
- Tree-shaped burr with radius end according to DIN 8032.
Special features
- Excellent stock removal rate and tool life due to innovative tooth geometry.
- Tangibly more aggressive, large chips and very good chip removal.
- Comfortable working with reduced vibration and less noise.
- The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.
Recommendations for use
- Determine the rotational speed in each case depending on the titanium alloy you need to machine.
- Reduce the rotational speed if excessive flying sparks occur. Depending on the titanium alloy you are machining, flying sparks may not be entirely avoidable.
- To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
- Observe the recommended rotational speeds.
- If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
- To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 3 mm with drives with a power output of 75 to 300 watts.
Safety notes
- The very high stock removal rate can cause discolouration on the shank. This does not constitute a safety risk.
Product identifiers
- Product number
- 21218184
- Family SKU
- 178412
- EAN
- 4007220034354